IDEAS home Printed from https://ideas.repec.org/a/bla/inecol/v27y2023i3p868-881.html
   My bibliography  Save this article

Taking stock for repair and refurbishing: A review of harvesting of spare parts from electrical and electronic products

Author

Listed:
  • Jessika Luth Richter
  • Sahra Svensson‐Hoglund
  • Carl Dalhammar
  • Jennifer D. Russell
  • Åke Thidell

Abstract

A circular economy (CE) calls for the value of materials and products to be maintained and recovered through narrowing, closing, and slowing loops. However, there remain challenges in capturing value through reuse of components in refurbished and repaired products. In this paper, we provide an overview of the research and practice of harvesting spare parts from used and waste electrical and electronic equipment (white goods and consumer electronic products). Through a literature review and case studies of Norway, Sweden, and California, we provide an overview of drivers and barriers for spare part harvesting. Applying a stakeholder value mapping framework, we identify the key stakeholders involved in spare part harvesting and map the values captured, missed, and destroyed to identify opportunities for increased value retention. Finally, we suggest further refinements for policy to upscale spare part harvesting in light of CE goals and objectives.

Suggested Citation

  • Jessika Luth Richter & Sahra Svensson‐Hoglund & Carl Dalhammar & Jennifer D. Russell & Åke Thidell, 2023. "Taking stock for repair and refurbishing: A review of harvesting of spare parts from electrical and electronic products," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 868-881, June.
    • Handle: RePEc:bla:inecol:v:27:y:2023:i:3:p:868-881
    DOI: 10.1111/jiec.13315
    as

    Download full text from publisher

    File URL: https://doi.org/10.1111/jiec.13315
    Download Restriction: no
    File URL: https://libkey.io/10.1111/jiec.13315?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Serdar Türkeli & Beijia Huang & Agata Stasik & René Kemp, 2019. "Circular Economy as a Glocal Business Activity: Mobile Phone Repair in the Netherlands, Poland and China," Energies, MDPI, vol. 12(3), pages 1-22, February.
    2. Haden Edward Quinlan & Talha Hasan & John Jaddou & A. John Hart, 2017. "Industrial and Consumer Uses of Additive Manufacturing: A Discussion of Capabilities, Trajectories, and Challenges," Journal of Industrial Ecology, Yale University, vol. 21(S1), pages 15-20, November.
    3. Tim Cooper, 2005. "Slower Consumption Reflections on Product Life Spans and the “Throwaway Society”," Journal of Industrial Ecology, Yale University, vol. 9(1‐2), pages 51-67, January.
    4. J. Halluite & J. D. Linton & J. S. Yeomans & R. Yoogalingam, 2005. "The challenge of hazardous waste management in a sustainable environment: insights from electronic recovery laws," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 12(1), pages 31-37, March.
    5. Massimo Conti & Simone Orcioni, 2020. "Modeling of Failure Probability for Reliability and Component Reuse of Electric and Electronic Equipment," Energies, MDPI, vol. 13(11), pages 1-18, June.
    6. Karel Kellens & Martin Baumers & Timothy G. Gutowski & William Flanagan & Reid Lifset & Joost R. Duflou, 2017. "Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications," Journal of Industrial Ecology, Yale University, vol. 21(S1), pages 49-68, November.
    7. Carl Dalhammar & Emelie Wihlborg & Leonidas Milios & Jessika Luth Richter & Sahra Svensson-Höglund & Jennifer Russell & Åke Thidell, 2021. "Enabling Reuse in Extended Producer Responsibility Schemes for White Goods: Legal and Organisational Conditions for Connecting Resource Flows and Actors," Circular Economy and Sustainability,, Springer.
    8. Anja Marie Bundgaard & Rikke Dorothea Huulgaard, 2019. "Luxury products for the circular economy? A case study of Bang & Olufsen," Business Strategy and the Environment, Wiley Blackwell, vol. 28(5), pages 699-709, July.
    9. K Sahyouni & R C Savaskan & M S Daskin, 2010. "The effect of lifetime buys on warranty repair operations," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(5), pages 790-803, May.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Di He & Hyung Chul Kim & Robert De Kleine & Vi Kie Soo & Alper Kiziltas & Paul Compston & Matthew Doolan, 2022. "Life cycle energy and greenhouse gas emissions implications of polyamide 12 recycling from selective laser sintering for an injection‐molded automotive component," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1378-1388, August.
    2. Chen, Jiguang & Hu, Qiying, 2015. "Optimal payment scheme when the supplier’s quality level and cost are unknown," European Journal of Operational Research, Elsevier, vol. 245(3), pages 731-742.
    3. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    4. Germán Arana-Landín & Naiara Uriarte-Gallastegi & Beñat Landeta-Manzano & Iker Laskurain-Iturbe, 2023. "The Contribution of Lean Management—Industry 4.0 Technologies to Improving Energy Efficiency," Energies, MDPI, vol. 16(5), pages 1-19, February.
    5. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    6. Jungell-Michelsson, Jessica & Heikkurinen, Pasi, 2022. "Sufficiency: A systematic literature review," Ecological Economics, Elsevier, vol. 195(C).
    7. Sezgin Çağlar Aksezer, 2023. "Sustainability via Extended Warranty Contracts: Design for a Consumer Electronics Retailer," Sustainability, MDPI, vol. 16(1), pages 1-11, December.
    8. Marcelo Vinhal Nepomuceno & Michel Laroche, 2017. "When Materialists Intend to Resist Consumption: The Moderating Role of Self-Control and Long-Term Orientation," Journal of Business Ethics, Springer, vol. 143(3), pages 467-483, July.
    9. Kirsi Immonen & Sini Metsä-Kortelainen & Juha Nurmio & Amélie Tribot & Tuomas Turpeinen & Atte Mikkelson & Tomi Kalpio & Otto-Ville Kaukoniemi & Heli Kangas, 2022. "Recycling of 3D Printable Thermoplastic Cellulose-Composite," Sustainability, MDPI, vol. 14(5), pages 1-16, February.
    10. Zhichao Liu & Qiuhong Jiang & Fuda Ning & Hoyeol Kim & Weilong Cong & Changxue Xu & Hong-chao Zhang, 2018. "Investigation of Energy Requirements and Environmental Performance for Additive Manufacturing Processes," Sustainability, MDPI, vol. 10(10), pages 1-15, October.
    11. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio & Wu, Shaomin, 2023. "Maintenance policies and models: A bibliometric and literature review of strategies for reuse and remanufacturing," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    12. Ben Bridgens & Kersty Hobson & Debra Lilley & Jacquetta Lee & Janet L. Scott & Garrath T. Wilson, 2019. "Closing the Loop on E‐waste: A Multidisciplinary Perspective," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 169-181, February.
    13. Nnorom, I.C. & Osibanjo, O., 2008. "Overview of electronic waste (e-waste) management practices and legislations, and their poor applications in the developing countries," Resources, Conservation & Recycling, Elsevier, vol. 52(6), pages 843-858.
    14. Torsten Hummen & Stefanie Hellweg & Ramin Roshandel, 2023. "Optimizing Lifespan of Circular Products: A Generic Dynamic Programming Approach for Energy-Using Products," Energies, MDPI, vol. 16(18), pages 1-27, September.
    15. Truttmann, Nina & Rechberger, Helmut, 2006. "Contribution to resource conservation by reuse of electrical and electronic household appliances," Resources, Conservation & Recycling, Elsevier, vol. 48(3), pages 249-262.
    16. Erik G. Hansen & Ferdinand Revellio, 2020. "Circular value creation architectures: Make, ally, buy, or laissez‐faire," Journal of Industrial Ecology, Yale University, vol. 24(6), pages 1250-1273, December.
    17. Rikke Marie Moalem & Mette Alberg Mosgaard, 2021. "A Critical Review of the Role of Repair Cafés in a Sustainable Circular Transition," Sustainability, MDPI, vol. 13(22), pages 1-25, November.
    18. Pedro Manuel Hernández-Castellano & María Dolores Martínez-Rivero & María Dolores Marrero-Alemán & Luis Suárez-García & Alejandro Gutiérrez-Barcenilla, 2020. "Open Education through Interactive Training Material," Sustainability, MDPI, vol. 12(18), pages 1-17, September.
    19. Emine Sarigöllü & Chenxuan Hou & Myriam Ertz, 2021. "Sustainable product disposal: Consumer redistributing behaviors versus hoarding and throwing away," Business Strategy and the Environment, Wiley Blackwell, vol. 30(1), pages 340-356, January.
    20. Wouter Sterkens & Ellen Bracquené & Dillam Jossue Díaz‐Romero & Toon Goedemé & Wim Dewulf & Jef R. Peeters, 2023. "Product label identification with OCR for model‐specific reuse, repair, and recycling: A case study for washing machines," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 834-844, June.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:bla:inecol:v:27:y:2023:i:3:p:868-881. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: http://www.blackwellpublishing.com/journal.asp?ref=1088-1980 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.