IDEAS home Printed from https://ideas.repec.org/a/zib/zjmerd/v42y2019i2p87-97.html
   My bibliography  Save this article

Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser

Author

Listed:
  • Van Viet Pham

    (Vietnam Maritime University, Haiphong city, Vietnam)

Abstract

In the current trend of technology and computer science development, the application of computer software to solve technical problems in dynamics and combustion of engines becomes easier. However, commercial software packages have very high prices and are difficult to access to small researchers and researchers in developing countries like Vietnam. In that software, Diesel-RK is considered a very good open source software for young researchers, because it is free and capable of simulating combustion and thermodynamics of diesel engines very well. This paper presents the results of the Diesel-RK application to simulate combustion and fuel injection for a marine diesel engine using a homogeneous fuel mixture from ultra-low sulfur fuels (ULSD) and base-palm oil biodiesel fuel (BO). The simulation results are used to evaluate the criteria of power, pressure, and temperature in the engine combustion chamber, and provide very useful data about soot emissions and NOx when using five types of fuel are ULSD, ULSD-B5, ULSD-B10, ULSD-20, ULSD-B50 and ULSD-B100.

Suggested Citation

  • Van Viet Pham, 2019. "Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 87-97, March.
    • Handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:87-97
    DOI: 10.26480/jmerd.02.2019.87.97
    as

    Download full text from publisher

    File URL: https://jmerd.org.my/download/3233/
    Download Restriction: no
    File URL: https://libkey.io/10.26480/jmerd.02.2019.87.97?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Hoang, Anh Tuan, 2019. "Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel," Energy, Elsevier, vol. 171(C), pages 795-808.
    2. Reham, S.S. & Masjuki, H.H. & Kalam, M.A. & Shancita, I. & Rizwanul Fattah, I.M. & Ruhul, A.M., 2015. "Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 1566-1579.
    3. Van Viet Pham, 2018. "Analyzing The Effect Of Heated Wall Surface Temperatures Combustion Chamber Deposit Formation," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 41(4), pages 17-21, November.
    4. Norhidayu Md Yatim & Nurhidayah Nasharudin & Noor Faraliza Samsudin & Salasiah M Said & Nor Farmiza Tarsik, 2019. "Recognizing The Personal Competencies Of Future Information Professionals," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 3(1), pages 21-23, February.
    5. repec:zib:zjmerd:4jmerd2018-17-21 is not listed on IDEAS
    6. repec:zib:zjmerd:4jmerd2018-22-32 is not listed on IDEAS
    7. Zhonghua Yan, 2018. "Modeling And Kinematics Simulation Of Plane Ten-Bar Mechanism Of Warp Knitting Machine Based On Simcape/Multibody," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 15-18, January.
    8. Anh Tuan Hoang & Van Viet Pham, 2018. "A Review On Fuels Used For Marine Diesel Engines," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 41(4), pages 22-23, November.
    9. Cecilia Adrian & Rusli Abdullah & Rodziah Atan & Yusmadi Yah Jusoh, 2018. "Theoretical Retical Aspect In Formulatting Assesment Model Of Big Data Analytics Environment," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(1), pages 16-17, February.
    10. Om Prakash Singh & Gaurav Kumar & Mukesh Kumar, 2019. "Role Of Taguchi And Grey Relational Method In Optimization Of Machining Parameters Of Different Materials: A Review," Acta Electronica Malaysia (AEM), Zibeline International Publishing, vol. 3(1), pages 19-22, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Van Hai Nguyen & Duc Thiep Cao & Thi Hien Do, 2019. "Research And Calculation Of The Biogas Fuel Supply System For A Small Marine Diesel Engine," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 64-70, January.
    2. Tien Quoc Le & Diep Thi Ngoc Hoang & Thu Thi Anh Do, 2019. "Learning Outcomes For Training Program By Cdio Approach Applied To Mechanical Industry 4.0," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 50-55, January.
    3. Diep Thi Ngoc Hoang & Thu Thi Anh Do, 2019. "Integration Of Teamwork Skills In Teaching In Order To Meet The Learning Outcomes In The Cdio Syllabus: Application To Technology And Engineering," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 1-5, March.
    4. Xuan Phuong Nguyen, 2019. "The Bus Transportation Issue And People Satisfaction With Public Transport In Ho Chi Minh City ," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 10-16, January.
    5. Hoang, Anh Tuan & Tabatabaei, Meisam & Aghbashlo, Mortaza & Carlucci, Antonio Paolo & Ölçer, Aykut I. & Le, Anh Tuan & Ghassemi, Abbas, 2021. "Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    6. Quoc Viet Pham & Van Hai Nguyen, 2019. "Proposal Of Some Advanced Technology Methods In The Assembly Of The Shaft System - Main Engine On The Small Cargo Ships," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 81-84, February.
    7. Dairabay Zh. Abdeli & Bae Wisap & Bakytzhan R. Taubayev, 2019. "Effective Technologies Of Dissolution Of Organic Deposits In The Bottomhole Zone Of Oil Wells Registration Form," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 15-18, March.
    8. Tran Thi Thanh Van & Tran Ngoc Thanh & Phạm Ngoc Vuong & Nguyen Duong Nam, 2019. "Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 76-78, March.
    9. Van Viet Pham & Duc Thiep Cao, 2019. "A Brief Review Of Technology Solutions On Fuel Injection System Of Diesel Engine To Increase The Power And Reduce Environmental Pollution," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 1-9, January.
    10. Van Vang Le & Lan Huong Nguyen, 2019. "Design And Fabrication Of Distillation Equipment Of Fresh Water From The Seawater By The Use Of The Waste Heat From Diesel Engines," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 79-83, March.
    11. repec:zib:zjmerd:4jmerd2018-116-121 is not listed on IDEAS
    12. Tuan Hoang, Anh & Viet Pham, Van, 2021. "2-Methylfuran (MF) as a potential biofuel: A thorough review on the production pathway from biomass, combustion progress, and application in engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    13. Nguyen Thi Xuan Huong & Bui Thi Dieu Thuy, 2019. "Assessment Of Engineering Speciality Teaching In The Period Of Integration," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 62-65, April.
    14. Ismael, Mhadi A. & A. Aziz, A. Rashid & Mohammed, Salah E. & Zainal A, Ezrann Z. & Baharom, Masri B. & Hagos, Ftwi Yohaness, 2021. "Macroscopic and microscopic spray structure of water-in-diesel emulsions," Energy, Elsevier, vol. 223(C).
    15. Awad, Omar I. & Ali, Obed M. & Mamat, Rizalman & Abdullah, A.A. & Najafi, G. & Kamarulzaman, M.K. & Yusri, I.M. & Noor, M.M., 2017. "Using fusel oil as a blend in gasoline to improve SI engine efficiencies: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 1232-1242.
    16. Muteeb Ul Haq & Ali Turab Jafry & Saad Ahmad & Taqi Ahmad Cheema & Munib Qasim Ansari & Naseem Abbas, 2022. "Recent Advances in Fuel Additives and Their Spray Characteristics for Diesel-Based Blends," Energies, MDPI, vol. 15(19), pages 1-30, October.
    17. Ismael, Mhadi A. & Heikal, Morgan R. & Aziz, A. Rashid A. & Syah, Firman & Zainal A., Ezrann Z. & Crua, Cyril, 2018. "The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions," Applied Energy, Elsevier, vol. 222(C), pages 762-771.
    18. Taghipour, Alireza & Ramirez, Jerome A. & Brown, Richard J. & Rainey, Thomas J., 2019. "A review of fractional distillation to improve hydrothermal liquefaction biocrude characteristics; future outlook and prospects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 115(C).
    19. Kumar, Himansh & Sarma, A.K. & Kumar, Pramod, 2020. "A comprehensive review on preparation, characterization, and combustion characteristics of microemulsion based hybrid biofuels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 117(C).
    20. Vellaiyan, Suresh, 2020. "Combustion, performance and emission evaluation of a diesel engine fueled with soybean biodiesel and its water blends," Energy, Elsevier, vol. 201(C).
    21. Dayrabay Zh. Abdeli & Wisup Bae & Assel B. Seiden & Adi Novriansyah, 2019. "Development Of Effective Technology Of Deep Water Treatment From Suspended Solid Particles For Formation Pressure Maintenance At The Oil Fields," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 24-29, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:87-97. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing (email available below). General contact details of provider: https://jmerd.org.my/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.