IDEAS home Printed from https://ideas.repec.org/a/zib/zjmerd/v42y2019i2p76-78.html
   My bibliography  Save this article

Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology

Author

Listed:
  • Tran Thi Thanh Van

    (Vietnam Maritime University, Haiphong city, Vietnam)

  • Tran Ngoc Thanh

    (Military Institute of Science and Technology, Ha Noi City, Viet Nam)

  • Phạm Ngoc Vuong

    (Vietnam Maritime University, Haiphong city, Vietnam)

  • Nguyen Duong Nam

    (Vietnam Maritime University, Haiphong city, Vietnam)

Abstract

The paper has developed the calculation method of composite structure design according to wrap technology, the main results have been achieved: (i) – Constructing a mathematical model of composting tank under pressure of two sealed cylindrical layers by “grid method” with the following solutions: All tensile loads absorbed by the fibers, the tensile strength of the substrate in composite materials can be ignored; Composite shell is a non-torque shell with a relative thickness within the limits: ; Stress on all fibers everywhere, at any point of the surface, is constant or durable shell is uniform; and (ii)- The applied mathematical model to calculate structural parameters of fabrication of water filter.

Suggested Citation

  • Tran Thi Thanh Van & Tran Ngoc Thanh & Phạm Ngoc Vuong & Nguyen Duong Nam, 2019. "Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 76-78, March.
  • Handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:76-78
    DOI: 10.26480/jmerd.02.2019.76.78
    as

    Download full text from publisher

    File URL: https://jmerd.org.my/download/3227/
    Download Restriction: no

    File URL: https://libkey.io/10.26480/jmerd.02.2019.76.78?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Hoang, Anh Tuan, 2018. "Waste heat recovery from diesel engines based on Organic Rankine Cycle," Applied Energy, Elsevier, vol. 231(C), pages 138-166.
    2. Monaem Elmnifi & Moneer Amhamed & Naji Abdelwanis & Otman Imrayed, 2018. "Solar Supported Steam Production For Power Generation In Libya," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 5-9, February.
    3. Hoang, Anh Tuan, 2019. "Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel," Energy, Elsevier, vol. 171(C), pages 795-808.
    4. Zhonghua Yan, 2018. "Modeling And Kinematics Simulation Of Plane Ten-Bar Mechanism Of Warp Knitting Machine Based On Simcape/Multibody," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 15-18, January.
    5. Meisam Dastani & Somayeh Panahi & Masoumeh Sattari, 2019. "Webometrics Analysis Of Iranian Universities About Medical Sciences' Websites Between September 2016 And March 2017," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 3(1), pages 7-12, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hoang, Anh Tuan & Tabatabaei, Meisam & Aghbashlo, Mortaza & Carlucci, Antonio Paolo & Ölçer, Aykut I. & Le, Anh Tuan & Ghassemi, Abbas, 2021. "Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    2. Quoc Viet Pham & Van Hai Nguyen, 2019. "Proposal Of Some Advanced Technology Methods In The Assembly Of The Shaft System - Main Engine On The Small Cargo Ships," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 81-84, February.
    3. Van Viet Pham, 2019. "Correlation Of Overall Heat Transfer Coefficient In The Three Zones Of Wire And Tube Condenser," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 87-97, March.
    4. Van Hai Nguyen & Duc Thiep Cao & Thi Hien Do, 2019. "Research And Calculation Of The Biogas Fuel Supply System For A Small Marine Diesel Engine," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 64-70, January.
    5. Thi Lan Anh Vu & Tien Quoc Le, 2019. "Development Orientation For Higher Education Training Programme Of Mechanical Engineering In Industrial Revolution 4.0: A Perspective In Vietnam," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 71-73, January.
    6. Diep Thi Ngoc Hoang & Thu Thi Anh Do, 2019. "Integration Of Teamwork Skills In Teaching In Order To Meet The Learning Outcomes In The Cdio Syllabus: Application To Technology And Engineering," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 1-5, March.
    7. Xuan Phuong Nguyen, 2019. "The Bus Transportation Issue And People Satisfaction With Public Transport In Ho Chi Minh City ," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 10-16, January.
    8. repec:zib:zjmerd:4jmerd2018-116-121 is not listed on IDEAS
    9. Ping, Xu & Yang, Fubin & Zhang, Hongguang & Xing, Chengda & Zhang, Wujie & Wang, Yan & Yao, Baofeng, 2023. "Dynamic response assessment and multi-objective optimization of organic Rankine cycle (ORC) under vehicle driving cycle conditions," Energy, Elsevier, vol. 263(PA).
    10. Jiménez-Arreola, Manuel & Wieland, Christoph & Romagnoli, Alessandro, 2019. "Direct vs indirect evaporation in Organic Rankine Cycle (ORC) systems: A comparison of the dynamic behavior for waste heat recovery of engine exhaust," Applied Energy, Elsevier, vol. 242(C), pages 439-452.
    11. Hossein Nami & Amjad Anvari-Moghaddam & Ahmad Arabkoohsar & Amir Reza Razmi, 2020. "4E Analyses of a Hybrid Waste-Driven CHP–ORC Plant with Flue Gas Condensation," Sustainability, MDPI, vol. 12(22), pages 1-21, November.
    12. Dayrabay Zh. Abdeli & Wisup Bae & Assel B. Seiden & Adi Novriansyah, 2019. "Development Of Effective Technology Of Deep Water Treatment From Suspended Solid Particles For Formation Pressure Maintenance At The Oil Fields," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 24-29, March.
    13. Xia, Jiaxi & Wang, Jiangfeng & Lou, Juwei & Hu, Jianjun & Yao, Sen, 2023. "Thermodynamic, economic, environmental analysis and multi-objective optimization of a novel combined cooling and power system for cascade utilization of engine waste heat," Energy, Elsevier, vol. 277(C).
    14. Michael Chukwuemeka Ekwonu & Mirae Kim & Binqi Chen & Muhammad Tauseef Nasir & Kyung Chun Kim, 2023. "Dynamic Simulation of Partial Load Operation of an Organic Rankine Cycle with Two Parallel Expanders," Energies, MDPI, vol. 16(1), pages 1-18, January.
    15. Tang, Yujun & Feng, Jinfeng & Wang, Dawei & Zhu, Sipeng & Bai, Shuzhan & Li, Guoxiang, 2024. "Multi-mode operation of a novel dual-pressure steam rankine cycle system recovering multi-grade waste heat from a marine two-stroke engine equipped with the high-pressure exhaust gas recirculation sys," Energy, Elsevier, vol. 301(C).
    16. Vladimir Anatolyevich Markov & Bowen Sa & Sergey Nikolaevich Devyanin & Anatoly Anatolyevich Zherdev & Pablo Ramon Vallejo Maldonado & Sergey Anatolyevich Zykov & Aleksandr Dmitrievich Denisov & Hewag, 2021. "Investigation of the Performances of a Diesel Engine Operating on Blended and Emulsified Biofuels from Rapeseed Oil," Energies, MDPI, vol. 14(20), pages 1-28, October.
    17. Jin, Yunli & Gao, Naiping & Zhu, Tong, 2022. "Effect of resistive load characteristics on the performance of Organic Rankine cycle (ORC)," Energy, Elsevier, vol. 246(C).
    18. Li, Jian & Peng, Xiayao & Yang, Zhen & Hu, Shuozhuo & Duan, Yuanyuan, 2022. "Design, improvements and applications of dual-pressure evaporation organic Rankine cycles: A review," Applied Energy, Elsevier, vol. 311(C).
    19. Jie Ren & Zuoqin Qian & Xinyu Wang & Weilong Huang & Baolin Wang, 2024. "Investigation of a Biomass-Driven Cogeneration System Integrated with an Externally Fired Gas Turbine, Organic Rankine Cycle, and Absorption Refrigeration Cycle: Thermodynamic and Exergoeconomic Analy," Sustainability, MDPI, vol. 16(11), pages 1-35, May.
    20. Imran, Muhammad & Pili, Roberto & Usman, Muhammad & Haglind, Fredrik, 2020. "Dynamic modeling and control strategies of organic Rankine cycle systems: Methods and challenges," Applied Energy, Elsevier, vol. 276(C).
    21. Che Mat, S. & Idroas, M.Y. & Teoh, Y.H. & Hamid, M.F. & Sharudin, H. & Pahmi, M.A.A.H., 2022. "Optimization of ternary blends among refined palm oil-hexanol-melaleuca cajuputi oil and engine emissions analysis of the blends," Renewable Energy, Elsevier, vol. 196(C), pages 451-461.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:76-78. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing The email address of this maintainer does not seem to be valid anymore. Please ask Zibeline International Publishing to update the entry or send us the correct address (email available below). General contact details of provider: https://jmerd.org.my/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.