IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v34y2023i5d10.1007_s10845-022-01913-4.html
   My bibliography  Save this article

Autonomous self-healing mechanism for a CNC milling machine based on pattern recognition

Author

Listed:
  • Hussein A. Taha

    (Polytechnique de Montréal
    Sohag University)

  • Soumaya Yacout

    (Polytechnique de Montréal)

  • Yasser Shaban

    (Helwan University)

Abstract

A sustainable and reliable machining process is the main goal of seeking machine digitization. Artificial Intelligence (AI), and Cyber-Physical System (CPS) combined with Artificial Intelligence are used for process control. This has become more essential in the case of machining of high-cost aerospace materials and critical product specifications. In this paper, a novel self-healing mechanism was developed to recover a CNC machine from producing parts that do not conform, to surface roughness’s specifications. The machine settings are reconfigured autonomously and online to recover from the effect of tool wear and to keep the surface roughness within the design specifications. The proposed self-healing mechanism is based on a pattern recognition algorithm called Logical Analysis of Data (LAD). This algorithm generates patterns that characterize the out-of-specification state, and provides a corrective setting within the recovery patterns of the within-specification state by using various distance approaches. The developed self-healing mechanism is composed of three modules: CPS model of the CNC machine (module 1), classification into, out of, or within-specification states (module 2), and a self-healing controller (module 3) that is activated if the state of out-of-specification is found by module 2. The three modules are software. The current hardware system of the machine is not altered. The proposed self-healing is applicable and integrable to CNC machines with a wide range of machining parameters of feed rate from 20 mm/min to 750 mm/min and spindle speed from 15,000 RPM to 35,000 RPM. To validate the developed mechanism, a deep learning artificial model was developed on physical data to emulate the CNC milling machine in a CPS simulation environment, and test runs were executed. The proposed self-healing mechanism was evaluated under several simulation runs that covered the ranges of CNC machine settings. The measure of performance of the proposed mechanism is the out-of-specification clearing time. The test runs show that the proposed self-healing mechanism was able to clear the out-of- specification state and to recover the within-specification state in less than five seconds, with the best distance metric approach. The results of the time response for each test run are reported.

Suggested Citation

  • Hussein A. Taha & Soumaya Yacout & Yasser Shaban, 2023. "Autonomous self-healing mechanism for a CNC milling machine based on pattern recognition," Journal of Intelligent Manufacturing, Springer, vol. 34(5), pages 2185-2205, June.
    • Handle: RePEc:spr:joinma:v:34:y:2023:i:5:d:10.1007_s10845-022-01913-4
    DOI: 10.1007/s10845-022-01913-4
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-022-01913-4
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-022-01913-4?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yasser Shaban & Mouhab Meshreki & Soumaya Yacout & Marek Balazinski & Helmi Attia, 2017. "Process control based on pattern recognition for routing carbon fiber reinforced polymer," Journal of Intelligent Manufacturing, Springer, vol. 28(1), pages 165-179, January.
    2. Jinjiang Wang & Lunkuan Ye & Robert X. Gao & Chen Li & Laibin Zhang, 2019. "Digital Twin for rotating machinery fault diagnosis in smart manufacturing," International Journal of Production Research, Taylor & Francis Journals, vol. 57(12), pages 3920-3934, June.
    3. Gregory W. Vogl & Brian A. Weiss & Moneer Helu, 2019. "A review of diagnostic and prognostic capabilities and best practices for manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 79-95, January.
    4. Ahmed Elsheikh & Soumaya Yacout & Mohamed-Salah Ouali & Yasser Shaban, 2020. "Failure time prediction using adaptive logical analysis of survival curves and multiple machining signals," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 403-415, February.
    5. Jie Yang & Shaowen Lu & Liangyong Wang, 2020. "Fused magnesia manufacturing process: a survey," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 327-350, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Maurizio Bevilacqua & Eleonora Bottani & Filippo Emanuele Ciarapica & Francesco Costantino & Luciano Di Donato & Alessandra Ferraro & Giovanni Mazzuto & Andrea Monteriù & Giorgia Nardini & Marco Orten, 2020. "Digital Twin Reference Model Development to Prevent Operators’ Risk in Process Plants," Sustainability, MDPI, vol. 12(3), pages 1-17, February.
    2. Jie Yang & Shaowen Lu & Liangyong Wang, 2020. "Fused magnesia manufacturing process: a survey," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 327-350, February.
    3. Guo, Cui & Ryoo, Hong Seo, 2021. "On Pareto-Optimal Boolean Logical Patterns for Numerical Data," Applied Mathematics and Computation, Elsevier, vol. 403(C).
    4. Dong, Yutong & Jiang, Hongkai & Wu, Zhenghong & Yang, Qiao & Liu, Yunpeng, 2023. "Digital twin-assisted multiscale residual-self-attention feature fusion network for hypersonic flight vehicle fault diagnosis," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    5. Kendrik Yan Hong Lim & Pai Zheng & Chun-Hsien Chen, 2020. "A state-of-the-art survey of Digital Twin: techniques, engineering product lifecycle management and business innovation perspectives," Journal of Intelligent Manufacturing, Springer, vol. 31(6), pages 1313-1337, August.
    6. Lewis, Austin D. & Groth, Katrina M., 2022. "Metrics for evaluating the performance of complex engineering system health monitoring models," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    7. Yiwei Wang & Jian Zhou & Lianyu Zheng & Christian Gogu, 2022. "An end-to-end fault diagnostics method based on convolutional neural network for rotating machinery with multiple case studies," Journal of Intelligent Manufacturing, Springer, vol. 33(3), pages 809-830, March.
    8. Shashi Bhushan Jha & Radu F. Babiceanu & Remzi Seker, 2020. "Formal modeling of cyber-physical resource scheduling in IIoT cloud environments," Journal of Intelligent Manufacturing, Springer, vol. 31(5), pages 1149-1164, June.
    9. Wang, Jinrui & Zhang, Zongzhen & Liu, Zhiliang & Han, Baokun & Bao, Huaiqian & Ji, Shanshan, 2023. "Digital twin aided adversarial transfer learning method for domain adaptation fault diagnosis," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    10. Zuo, Tao & Zhang, Kai & Zheng, Qing & Li, Xianxin & Li, Zhixuan & Ding, Guofu & Zhao, Minghang, 2023. "A hybrid attention-based multi-wavelet coefficient fusion method in RUL prognosis of rolling bearings," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    11. Joaquín Ordieres-Meré & Tomás Prieto Remón & Jesús Rubio, 2020. "Digitalization: An Opportunity for Contributing to Sustainability From Knowledge Creation," Sustainability, MDPI, vol. 12(4), pages 1-21, February.
    12. Sanuri Ishak & Chong Tak Yaw & Siaw Paw Koh & Sieh Kiong Tiong & Chai Phing Chen & Talal Yusaf, 2021. "Fault Classification System for Switchgear CBM from an Ultrasound Analysis Technique Using Extreme Learning Machine," Energies, MDPI, vol. 14(19), pages 1-21, October.
    13. Lia Tirabeni & Paola De Bernardi & Canio Forliano & Mattia Franco, 2019. "How Can Organisations and Business Models Lead to a More Sustainable Society? A Framework from a Systematic Review of the Industry 4.0," Sustainability, MDPI, vol. 11(22), pages 1-23, November.
    14. Kedong Yan & Hong Seo Ryoo, 2022. "Graph, clique and facet of boolean logical polytope," Journal of Global Optimization, Springer, vol. 82(4), pages 1015-1052, April.
    15. Siyi Ding & Xiaohu Zheng & Mingyu Wu & Qirui Yang, 2022. "A Novel Sustainable Processing Mode for Burr Classified Prediction of Weak Rigid Drilling Process Using a Fusion Modeling Method," Sustainability, MDPI, vol. 14(12), pages 1-21, June.
    16. Loske, Dominik & Klumpp, Matthias, 2020. "Simulating the impact of digitalization on retail logistics efficiency," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Data Science and Innovation in Supply Chain Management: How Data Transforms the Value Chain. Proceedings of the Hamburg International Conference of Lo, volume 29, pages 77-111, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    17. Vrignat, Pascal & Kratz, Frédéric & Avila, Manuel, 2022. "Sustainable manufacturing, maintenance policies, prognostics and health management: A literature review," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    18. Teng, Sin Yong & Touš, Michal & Leong, Wei Dong & How, Bing Shen & Lam, Hon Loong & Máša, Vítězslav, 2021. "Recent advances on industrial data-driven energy savings: Digital twins and infrastructures," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    19. Lejeune, Miguel & Lozin, Vadim & Lozina, Irina & Ragab, Ahmed & Yacout, Soumaya, 2019. "Recent advances in the theory and practice of Logical Analysis of Data," European Journal of Operational Research, Elsevier, vol. 275(1), pages 1-15.
    20. Sami Bouzid & Philippe Viarouge & Jérôme Cros, 2020. "Real-Time Digital Twin of a Wound Rotor Induction Machine Based on Finite Element Method," Energies, MDPI, vol. 13(20), pages 1-18, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:34:y:2023:i:5:d:10.1007_s10845-022-01913-4. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.