IDEAS home Printed from https://ideas.repec.org/a/plo/pone00/0258399.html
   My bibliography  Save this article

Remanufacturing end-of-life passenger car waste sheet steel into mesh sheet: A sustainability assessment

Author

Listed:
  • Ziyad Tariq Abdullah

Abstract

This study analysed the business sustainability of remanufacturing waste steel sheet from the shells of end-of-life vehicles into mesh steel sheet for manufacturing sheet-metal products. Hybrid statistical, fuzzy, and overall sustainability-index curve-fitting models were used to analyse the technical, economic, environmental, management, and social feasibility of remanufacturing, where the sales price, eco-cost savings, and CO2 emission reductions were used as typical statistical indicators. The remanufacturing process was optimised to allocate hardware for a plant recovering 480 m2/shift of waste sheet steel and producing 2851–5520 m2/shift of mesh sheet steel. Six scenarios were used to model the sustainability parameters to normalise the sustainability index values. The sustainability index of each parameter was calculated by multiplying its weight of importance by its weight of satisfaction. The highest sustainability index of 0.95 was calculated for the economic feasibility index, while the lowest sustainability index of 0.4 was calculated for the management feasibility. Remanufacturing of waste sheet steel into mesh sheet steel can be applied with an estimated overall sustainability index of 0.88.

Suggested Citation

  • Ziyad Tariq Abdullah, 2021. "Remanufacturing end-of-life passenger car waste sheet steel into mesh sheet: A sustainability assessment," PLOS ONE, Public Library of Science, vol. 16(10), pages 1-18, October.
    • Handle: RePEc:plo:pone00:0258399
    DOI: 10.1371/journal.pone.0258399
    as

    Download full text from publisher

    File URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0258399
    Download Restriction: no
    File URL: https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0258399&type=printable
    Download Restriction: no
    File URL: https://libkey.io/10.1371/journal.pone.0258399?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Inghels, Dirk & Dullaert, Wout & Raa, Birger & Walther, Grit, 2016. "Influence of composition, amount and life span of passenger cars on end-of-life vehicles waste in Belgium: A system dynamics approach," Transportation Research Part A: Policy and Practice, Elsevier, vol. 91(C), pages 80-104.
    2. Gołębiewski, Bronisław & Trajer, Jędrzej & Jaros, Małgorzata & Winiczenko, Radosław, 2013. "Modelling of the location of vehicle recycling facilities: A case study in Poland," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 10-20.
    3. Sato, Fernando Enzo Kenta & Furubayashi, Takaaki & Nakata, Toshihiko, 2019. "Application of energy and CO2 reduction assessments for end-of-life vehicles recycling in Japan," Applied Energy, Elsevier, vol. 237(C), pages 779-794.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ziyad Tariq Abdullah, 2021. "Assessment of end-of-life vehicle recycling: Remanufacturing waste sheet steel into mesh sheet," PLOS ONE, Public Library of Science, vol. 16(12), pages 1-17, December.
    2. Buberger, Johannes & Kersten, Anton & Kuder, Manuel & Eckerle, Richard & Weyh, Thomas & Thiringer, Torbjörn, 2022. "Total CO2-equivalent life-cycle emissions from commercially available passenger cars," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    3. Zambri Harun & Altaf Hossain Molla & Mohd Radzi Abu Mansor & Rozmi Ismail, 2022. "Development, Critical Evaluation, and Proposed Framework: End-of-Life Vehicle Recycling in India," Sustainability, MDPI, vol. 14(22), pages 1-25, November.
    4. Paul Wolfram & Qingshi Tu & Niko Heeren & Stefan Pauliuk & Edgar G. Hertwich, 2021. "Material efficiency and climate change mitigation of passenger vehicles," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 494-510, April.
    5. Fernando Enzo Kenta Sato & Toshihiko Nakata, 2020. "Energy Consumption Analysis for Vehicle Production through a Material Flow Approach," Energies, MDPI, vol. 13(9), pages 1-18, May.
    6. Nicole Anderson & Gayan Wedawatta & Ishara Rathnayake & Niluka Domingo & Zahirah Azizi, 2022. "Embodied Energy Consumption in the Residential Sector: A Case Study of Affordable Housing," Sustainability, MDPI, vol. 14(9), pages 1-18, April.
    7. Vuk Petronijević & Aleksandar Đorđević & Miladin Stefanović & Slavko Arsovski & Zdravko Krivokapić & Milan Mišić, 2020. "Energy Recovery through End-of-Life Vehicles Recycling in Developing Countries," Sustainability, MDPI, vol. 12(21), pages 1-26, October.
    8. Rešetar, Marko & Pejić, Goran & Lulić, Zoran, 2018. "Changes and trends in the Croatian road vehicle fleet – Need for change of policy measures," Transport Policy, Elsevier, vol. 71(C), pages 92-105.
    9. Jianjun Dong & Yuanxian Xu & Bon-gang Hwang & Rui Ren & Zhilong Chen, 2019. "The Impact of Underground Logistics System on Urban Sustainable Development: A System Dynamics Approach," Sustainability, MDPI, vol. 11(5), pages 1-21, February.
    10. T. V. Krishna Mohan & R. K. Amit, 2020. "Dismantlers’ dilemma in end-of-life vehicle recycling markets: a system dynamics model," Annals of Operations Research, Springer, vol. 290(1), pages 591-619, July.
    11. Zhang Yu & Syed Abdul Rehman Khan & Hafiz Muhammad Zia-ul-haq & Muhammad Tanveer & Muhammad Jawad Sajid & Shehzad Ahmed, 2022. "A Bibliometric Analysis of End-of-Life Vehicles Related Research: Exploring a Path to Environmental Sustainability," Sustainability, MDPI, vol. 14(14), pages 1-21, July.
    12. Kilic, Huseyin Selcuk & Cebeci, Ufuk & Ayhan, Mustafa Batuhan, 2015. "Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey," Resources, Conservation & Recycling, Elsevier, vol. 95(C), pages 120-132.
    13. Hasani Mohd Ali & Vladimir Simic & Charli Sitinjak & Jady Zaidi Hassim & Muhamad Helmi Md Said & Rasyikah Md Khalid & Grace Emmanuel Kaka & Rozmi Ismail, 2023. "Exploring Public Perceptions and Disposal Procedures in the Development of a Comprehensive End-of-Life Vehicle Regulation in Malaysia: A Pilot Study," Sustainability, MDPI, vol. 15(6), pages 1-18, March.
    14. Xiaohui He & Dongmei Su & Wenchao Cai & Alexandra Pehlken & Guofang Zhang & Aimin Wang & Jinsheng Xiao, 2021. "Influence of Material Selection and Product Design on Automotive Vehicle Recyclability," Sustainability, MDPI, vol. 13(6), pages 1-21, March.
    15. Simic, Vladimir, 2015. "A two-stage interval-stochastic programming model for planning end-of-life vehicles allocation under uncertainty," Resources, Conservation & Recycling, Elsevier, vol. 98(C), pages 19-29.
    16. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2015. "A literature review and perspectives in reverse logistics," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 76-92.
    17. Geoffrey Barongo Omosa & Solange Ayuni Numfor & Monika Kosacka-Olejnik, 2023. "Modeling a Reverse Logistics Supply Chain for End-of-Life Vehicle Recycling Risk Management: A Fuzzy Risk Analysis Approach," Sustainability, MDPI, vol. 15(3), pages 1-19, January.
    18. Fernando Enzo Kenta Sato & Toshihiko Nakata, 2019. "Recoverability Analysis of Critical Materials from Electric Vehicle Lithium-Ion Batteries through a Dynamic Fleet-Based Approach for Japan," Sustainability, MDPI, vol. 12(1), pages 1-18, December.
    19. D'Adamo, Idiano & Gastaldi, Massimo & Rosa, Paolo, 2020. "Recycling of end-of-life vehicles: Assessing trends and performances in Europe," Technological Forecasting and Social Change, Elsevier, vol. 152(C).
    20. Simic, Vladimir, 2016. "End-of-life vehicles allocation management under multiple uncertainties: An interval-parameter two-stage stochastic full-infinite programming approach," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 1-17.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:plo:pone00:0258399. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: plosone (email available below). General contact details of provider: https://journals.plos.org/plosone/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.