IDEAS home Printed from https://ideas.repec.org/a/plo/pone00/0224401.html
   My bibliography  Save this article

Thermogravimetric analysis of the co-combustion of coal and polyvinyl chloride

Author

Listed:
  • Hongbin Gao
  • Jingkuan Li

Abstract

Coal gangue has the shortcomings of low calorific value and refractory burnout, while polyvinyl chloride has the advantages of a long combustion process and high calorific value. In order to make up for these shortcomings of coal gangue, the possibility of a treatment method based on co-combustion of coal gangue with polyvinyl chloride, which can be centrally recovered from municipal solid waste, is proposed. In order to analyze the combustion effect of a mixture of these two substances, experimental samples were prepared by mixing these two substances in three different ratios, and they were tested by thermogravimetric analysis. The experimental results were compared, analyzed and evaluated. The effects of the proportion of polyvinyl chloride in the mixture on the temperature parameters, activation energy, and interaction during co-combustion were analyzed. In order to analyze the interaction during co-combustion of the two, a coupling analysis method for mixed combustion is presented, and the effectiveness of this method is verified by comparing with the correlation analysis results of co-combustion. The results show that co-combustion can mitigate the ignition difficulty and burnout of coal gangue. When the proportion of polyvinyl chloride in the mixture was increased from 20% to 80%, the maximum weightlessness rate of the first stage rapidly increased from 4.5%/min to 15.6%/min; however, that of the second stage slowly increased from 3.7%/min to 4.2%/min. A 20% proportion of polyvinyl chloride showed the most significant promotion of co-combustion, with a maximum coupling coefficient of 0.00318, which was 1.11 and 1.35 times greater than that of 50% and 80% proportions, respectively. Co-combustion can reduce the activation energy of coal gangue during the initial and end stages. Therefore, co-combustion is helpful to improve the problems of low calorific value and refractory burnout of coal gangue.

Suggested Citation

  • Hongbin Gao & Jingkuan Li, 2019. "Thermogravimetric analysis of the co-combustion of coal and polyvinyl chloride," PLOS ONE, Public Library of Science, vol. 14(10), pages 1-35, October.
    • Handle: RePEc:plo:pone00:0224401
    DOI: 10.1371/journal.pone.0224401
    as

    Download full text from publisher

    File URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0224401
    Download Restriction: no
    File URL: https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0224401&type=printable
    Download Restriction: no
    File URL: https://libkey.io/10.1371/journal.pone.0224401?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Min Hee Chung & Jin Chul Park, 2017. "An Experimental Study on the Thermal Performance of Phase-Change Material and Wood-Plastic Composites for Building Roofs," Energies, MDPI, vol. 10(2), pages 1-13, February.
    2. Paolo De Filippis & Benedetta De Caprariis & Marco Scarsella & Nicola Verdone, 2015. "Double Distribution Activation Energy Model as Suitable Tool in Explaining Biomass and Coal Pyrolysis Behavior," Energies, MDPI, vol. 8(3), pages 1-15, March.
    3. Wendi Chen & Fei Wang & Altaf Hussain Kanhar, 2017. "Sludge Acts as a Catalyst for Coal during the Co-Combustion Process Investigated by Thermogravimetric Analysis," Energies, MDPI, vol. 10(12), pages 1-11, December.
    4. María E. Iñiguez & Juan A. Conesa & Andrés Fullana, 2018. "Effect of Sodium Chloride and Thiourea on Pollutant Formation during Combustion of Plastics," Energies, MDPI, vol. 11(8), pages 1-11, August.
    5. Kaixin Li & Shao Wee Lee & Guoan Yuan & Junxi Lei & Shengxuan Lin & Piyarat Weerachanchai & Yanhui Yang & Jing-Yuan Wang, 2016. "Investigation into the Catalytic Activity of Microporous and Mesoporous Catalysts in the Pyrolysis of Waste Polyethylene and Polypropylene Mixture," Energies, MDPI, vol. 9(6), pages 1-15, June.
    6. Eunhye Song & Daegi Kim & Cheol-Jin Jeong & Do-Yong Kim, 2019. "A Kinetic Study on Combustible Coastal Debris Pyrolysis via Thermogravimetric Analysis," Energies, MDPI, vol. 12(5), pages 1-10, March.
    7. Liu, Xiang & Chen, Meiqian & Wei, Yuanhang, 2015. "Combustion behavior of corncob/bituminous coal and hardwood/bituminous coal," Renewable Energy, Elsevier, vol. 81(C), pages 355-365.
    8. Anes Kazagic & Nihad Hodzic & Sadjit Metovic, 2018. "Co-Combustion of Low-Rank Coal with Woody Biomass and Miscanthus: An Experimental Study," Energies, MDPI, vol. 11(3), pages 1-14, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, Jijiang & Veksha, Andrei & Chan, Wei Ping & Giannis, Apostolos & Lisak, Grzegorz, 2022. "Chemical recycling of plastic waste for sustainable material management: A prospective review on catalysts and processes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    2. Qiang Zhong & Jian Zhang & Yongbin Yang & Qian Li & Bin Xu & Tao Jiang, 2018. "Thermal Behavior of Coal Used in Rotary Kiln and Its Combustion Intensification," Energies, MDPI, vol. 11(5), pages 1-12, April.
    3. Feng, Yipeng & Qiu, Keying & Zhang, Zhiping & Li, Chong & Rahman, Md. Maksudur & Cai, Junmeng, 2022. "Distributed activation energy model for lignocellulosic biomass torrefaction kinetics with combined heating program," Energy, Elsevier, vol. 239(PC).
    4. Beata Jabłońska & Paweł Kiełbasa & Maroš Korenko & Tomasz Dróżdż, 2019. "Physical and Chemical Properties of Waste from PET Bottles Washing as A Component of Solid Fuels," Energies, MDPI, vol. 12(11), pages 1-17, June.
    5. Gyeong-Min Kim & Dae-Gyun Lee & Chung-Hwan Jeon, 2019. "Fundamental Characteristics and Kinetic Analysis of Lignocellulosic Woody and Herbaceous Biomass Fuels," Energies, MDPI, vol. 12(6), pages 1-16, March.
    6. Xiangxi Wang & Zhenzhong Hu & Inamullah Mian & Omar D. Dacres & Jian Li & Bo Wei & Mei Zhong & Xian Li & Noor Rahman & Guangqian Luo & Hong Yao, 2022. "Gasification Kinetics of Organic Solid Waste Pellets: Comparative Study Using Distributed Activation Energy Model and Coats–Redfern Method," Energies, MDPI, vol. 15(24), pages 1-12, December.
    7. Vasile Bendic & Dan Dobrotă, 2018. "Theoretical and Experimental Contributions on the Use of Smart Composite Materials in the Construction of Civil Buildings with Low Energy Consumption," Energies, MDPI, vol. 11(9), pages 1-20, September.
    8. Faisal Abnisa, 2023. "Enhanced Liquid Fuel Production from Pyrolysis of Plastic Waste Mixtures Using a Natural Mineral Catalyst," Energies, MDPI, vol. 16(3), pages 1-16, January.
    9. Jesus Fernando Hinojosa & Saul Fernando Moreno & Victor Manuel Maytorena, 2023. "Low-Temperature Applications of Phase Change Materials for Energy Storage: A Descriptive Review," Energies, MDPI, vol. 16(7), pages 1-39, March.
    10. Wu, Dongyin & Wang, Yuhao & Wang, Yang & Li, Sen & Wei, Xiaolin, 2016. "Release of alkali metals during co-firing biomass and coal," Renewable Energy, Elsevier, vol. 96(PA), pages 91-97.
    11. Natalia Cid & Ana Ogando & M. A. Gómez, 2017. "Acquisition System Verification for Energy Efficiency Analysis of Building Materials," Energies, MDPI, vol. 10(9), pages 1-12, August.
    12. João Cardoso & Valter Silva & Daniela Eusébio & Paulo Brito, 2017. "Hydrodynamic Modelling of Municipal Solid Waste Residues in a Pilot Scale Fluidized Bed Reactor," Energies, MDPI, vol. 10(11), pages 1-20, November.
    13. Luo, Wei & Hu, Qing & Fan, Zhong-yi & Wan, Jun & He, Qian & Huang, Sheng-xiong & Zhou, Nan & Song, Min & Zhang, Jia-chao & Zhou, Zhi, 2020. "The effect of different particle sizes and HCl-modified kaolin on catalytic pyrolysis characteristics of reworked polypropylene plastics," Energy, Elsevier, vol. 213(C).
    14. Sunday Yusuf Kpalo & Mohamad Faiz Zainuddin & Latifah Abd Manaf & Ahmad Muhaimin Roslan, 2020. "Production and Characterization of Hybrid Briquettes from Corncobs and Oil Palm Trunk Bark under a Low Pressure Densification Technique," Sustainability, MDPI, vol. 12(6), pages 1-16, March.
    15. Vasile Bendic & Dan Dobrotă & Tiberiu Dobrescu & George Enciu & Nicoleta-Elisabeta Pascu, 2019. "Rheological Issues of Phase Change Materials Obtained by the Complex Coacervation of Butyl Stearate in Poly Methyl Methacrylate Membranes," Energies, MDPI, vol. 12(5), pages 1-15, March.
    16. Anes Kazagic & Nihad Hodzic & Sadjit Metovic, 2018. "Co-Combustion of Low-Rank Coal with Woody Biomass and Miscanthus: An Experimental Study," Energies, MDPI, vol. 11(3), pages 1-14, March.
    17. Muhammad Hanif Ainun Azhar & Salh Alhammadi & Seokjin Jang & Jitaek Kim & Jungtaek Kim & Woo Kyoung Kim, 2023. "Long-Term Field Observation of the Power Generation and System Temperature of a Roof-Integrated Photovoltaic System in South Korea," Sustainability, MDPI, vol. 15(12), pages 1-15, June.
    18. Munir, Dureem & Irfan, Muhammad F. & Usman, Muhammad R., 2018. "Hydrocracking of virgin and waste plastics: A detailed review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 490-515.
    19. Sandhya Kuruvalan Vijayan & Mahmud Arman Kibria & Md Hemayet Uddin & Sankar Bhattacharya, 2021. "Pretreatment of Automotive Shredder Residues, Their Chemical Characterisation, and Pyrolysis Kinetics," Sustainability, MDPI, vol. 13(19), pages 1-19, September.
    20. Francesco Calise & Mário Costa & Qiuwang Wang & Xiliang Zhang & Neven Duić, 2018. "Recent Advances in the Analysis of Sustainable Energy Systems," Energies, MDPI, vol. 11(10), pages 1-30, September.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:plo:pone00:0224401. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: plosone (email available below). General contact details of provider: https://journals.plos.org/plosone/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.