IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v17y2025i5p2040-d1600858.html

Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO 2 ) Environment

Author

Listed:
  • Andrius Tamošiūnas

    (Plasma Processing Laboratory, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Mindaugas Milieška

    (Plasma Processing Laboratory, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Dovilė Gimžauskaitė

    (Plasma Processing Laboratory, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Mindaugas Aikas

    (Plasma Processing Laboratory, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Rolandas Uscila

    (Plasma Processing Laboratory, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Kęstutis Zakarauskas

    (Laboratory of Combustion Processes, Lithuanian Energy Institute, 44403 Kaunas, Lithuania)

  • Sebastian Fendt

    (Chair of Energy Systems, Technical University of Munich, 85748 Garching, Germany)

  • Sebastian Bastek

    (Chair of Energy Systems, Technical University of Munich, 85748 Garching, Germany)

  • Hartmut Spliethoff

    (Chair of Energy Systems, Technical University of Munich, 85748 Garching, Germany)

Abstract

The global coronavirus (COVID-19) pandemic in early 2020 caused the amount of medical waste, especially plastic waste, to increase. The pandemic exacerbated the plastic waste management problem, including the need to find more sustainable treatment methods. This study investigated the sustainable conversion of plastic waste (FFP2-type face masks) to syngas via pure CO 2 plasma gasification to recover energy and reduce environmental pollution. A direct current (DC) thermal arc plasma torch of 40.6–68.4 kW power generated the plasma stream. Carbon dioxide (CO 2 ), as a greenhouse gas (GHG), was used as the main plasma-forming gas and gasifying agent. The 140 thermal feedstock input plasma gasification system was used in the study. The effect of the CO 2 -to-C ratio on the gasification performance efficiency was investigated. The best CO 2 plasma gasification process performance was obtained at a CO 2 -to-C ratio of 2.34. In these conditions, the main syngas components (H 2 + CO) comprised 80.46 vol.% (H 2 : 24.62 vol.% and CO: 55.84 vol.%) and the following values were seen for the heating value of the syngas (LHV syngas : 13.88 MJ/Nm 3 ), the syngas yield (3.13 Nm 3 /kg FFP2 ), the tar content in the syngas (23.0 g/Nm 3 ), the carbon conversion efficiency (CCE: 70.6%), and the cold gas efficiency (CGE: 47.8%). Additionally, the plasma gasification process mass and energy balance were evaluated. It was demonstrated that CO 2 plasma gasification could be a promising thermochemical treatment technology for sustainable plastic waste disposal and the simultaneous utilization of greenhouse gases, such as carbon dioxide.

Suggested Citation

  • Andrius Tamošiūnas & Mindaugas Milieška & Dovilė Gimžauskaitė & Mindaugas Aikas & Rolandas Uscila & Kęstutis Zakarauskas & Sebastian Fendt & Sebastian Bastek & Hartmut Spliethoff, 2025. "Plasma Gasification of Medical Plastic Waste to Syngas in a Greenhouse Gas (CO 2 ) Environment," Sustainability, MDPI, vol. 17(5), pages 1-15, February.
    • Handle: RePEc:gam:jsusta:v:17:y:2025:i:5:p:2040-:d:1600858
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/17/5/2040/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/17/5/2040/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Li, Sarengaowa & Chen, Heng & Yuan, Xin & Pan, Peiyuan & Xu, Gang & Wang, Xiuyan & Wu, Lining, 2024. "Energy, exergy and economic analysis of a poly-generation system combining sludge pyrolysis and medical waste plasma gasification," Energy, Elsevier, vol. 295(C).
    2. Karellas, S. & Karl, J. & Kakaras, E., 2008. "An innovative biomass gasification process and its coupling with microturbine and fuel cell systems," Energy, Elsevier, vol. 33(2), pages 284-291.
    3. Chen, Heng & Li, Jiarui & Li, Tongyu & Xu, Gang & Jin, Xi & Wang, Min & Liu, Tong, 2022. "Performance assessment of a novel medical-waste-to-energy design based on plasma gasification and integrated with a municipal solid waste incineration plant," Energy, Elsevier, vol. 245(C).
    4. Mallick, Roni & Vairakannu, Prabu, 2024. "Experimental studies on CO2-thermal plasma gasification of refused derived fuel feedstock for clean syngas production," Energy, Elsevier, vol. 288(C).
    5. Ahmed Rida Galaly, 2022. "Sustainable Development Solutions for the Medical Waste Problem Using Thermal Plasmas," Sustainability, MDPI, vol. 14(17), pages 1-12, September.
    6. Wang, Yuting & Chen, Heng & Qiao, Shichao & Pan, Peiyuan & Xu, Gang & Dong, Yuehong & Jiang, Xue, 2023. "A novel methanol-electricity cogeneration system based on the integration of water electrolysis and plasma waste gasification," Energy, Elsevier, vol. 267(C).
    7. Chaves, Luiz Inácio & da Silva, Marcelo José & de Souza, Samuel Nelson Melegari & Secco, Deonir & Rosa, Helton Aparecido & Nogueira, Carlos Eduardo Camargo & Frigo, Elisandro Pires, 2016. "Small-scale power generation analysis: Downdraft gasifier coupled to engine generator set," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 491-498.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pawlak-Kruczek, Halina & Mularski, Jakub & Ostrycharczyk, Michał & Czerep, Michał & Baranowski, Marcin & Mączka, Tadeusz & Sadowski, Krzysztof & Hulisz, Patryk, 2023. "Application of plasma burners for char combustion in a pulverized coal-fired (PC) boiler – Experimental and numerical analysis," Energy, Elsevier, vol. 279(C).
    2. Vladimir E. Messerle & Alexandr B. Ustimenko & Oleg A. Lavrichshev & Marina K. Nugman, 2024. "The Gasification and Pyrolysis of Biomass Using a Plasma System," Energies, MDPI, vol. 17(22), pages 1-16, November.
    3. Mengze He & Ping Zhou & Xiqiang Zhao & Tao Wang, 2025. "Completion of Waste Heat Recovery and CO 2 Conversion Simultaneously Based on the Flue Gas Chemical Recuperative Cycle: A Review," Energies, MDPI, vol. 18(2), pages 1-25, January.
    4. Gui, Fangxu & Chen, Heng & Zheng, Qiwei & Zhao, Huanlin & Pan, Peiyuan & Bian, Jiayu & Yu, Zhiyong, 2024. "Performance analysis of a novel multi-production design via the integration of medical waste plasma gasification and waste tire pyrolysis," Energy, Elsevier, vol. 313(C).
    5. Tang, Jiehong & Tang, Yuting & Liu, Hongyu & Sun, Ziwei & Deng, Jingmin & Peng, Songbing & Liang, Xiaowen & Wang, Xiaojing & Huang, Haohang & Zheng, Zejie & Chen, Weilong & Ma, Xiaoqian, 2025. "Hydrogen-based synthetic fuel production from excavated waste: life cycle techno-environmental-economic choices of technical routes and targeted products," Energy, Elsevier, vol. 334(C).
    6. Zheng, Qiwei & Chen, Heng & Wu, Hongshan & Zheng, Hongxu & Pan, Peiyuan & Bian, Jiayu & Wang, Xiuyan, 2024. "Performance analysis of a medical waste gasification-based power generation system integrated with a coal-fired power unit considering dispatching optimization," Energy, Elsevier, vol. 310(C).
    7. Gassner, Martin & Maréchal, François, 2009. "Thermodynamic comparison of the FICFB and Viking gasification concepts," Energy, Elsevier, vol. 34(10), pages 1744-1753.
    8. Sharma, Monikankana & N, Rakesh & Dasappa, S., 2016. "Solid oxide fuel cell operating with biomass derived producer gas: Status and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 450-463.
    9. Roberta De Robbio, 2023. "Micro Gas Turbine Role in Distributed Generation with Renewable Energy Sources," Energies, MDPI, vol. 16(2), pages 1-37, January.
    10. Chadwick, Dara T. & McDonnell, Kevin P. & Brennan, Liam P. & Fagan, Colette C. & Everard, Colm D., 2014. "Evaluation of infrared techniques for the assessment of biomass and biofuel quality parameters and conversion technology processes: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 672-681.
    11. Marco Puglia & Nicolò Morselli & Simone Pedrazzi & Paolo Tartarini & Giulio Allesina & Alberto Muscio, 2021. "Specific and Cumulative Exhaust Gas Emissions in Micro-Scale Generators Fueled by Syngas from Biomass Gasification," Sustainability, MDPI, vol. 13(6), pages 1-13, March.
    12. Bang-Møller, C. & Rokni, M. & Elmegaard, B., 2011. "Exergy analysis and optimization of a biomass gasification, solid oxide fuel cell and micro gas turbine hybrid system," Energy, Elsevier, vol. 36(8), pages 4740-4752.
    13. Chitawo, Maxon L. & Chimphango, Annie F.A., 2017. "A synergetic integration of bioenergy and rice production in rice farms," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 58-67.
    14. Jia, Junxi & Abudula, Abuliti & Wei, Liming & Sun, Baozhi & Shi, Yue, 2015. "Thermodynamic modeling of an integrated biomass gasification and solid oxide fuel cell system," Renewable Energy, Elsevier, vol. 81(C), pages 400-410.
    15. Ud Din, Zia & Zainal, Z.A., 2016. "Biomass integrated gasification–SOFC systems: Technology overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1356-1376.
    16. Ji, Qiang & Cheng, Lin & Zhou, Yue & Liang, Zeng & Shi, Fashun & Zhang, Jianliang & Li, Kejiang, 2025. "Energy-carbon comprehensive efficiency evaluation of a hydrogen metallurgy system with low-temperature waste heat recovery," Applied Energy, Elsevier, vol. 401(PA).
    17. Susastriawan, A.A.P. & Saptoadi, Harwin & Purnomo,, 2017. "Small-scale downdraft gasifiers for biomass gasification: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 989-1003.
    18. Mesut Samastı & Yusuf Sait Türkan & Mustafa Güler & Mirac Nur Ciner & Ersin Namlı, 2024. "Site Selection of Medical Waste Disposal Facilities Using the Interval-Valued Neutrosophic Fuzzy EDAS Method: The Case Study of Istanbul," Sustainability, MDPI, vol. 16(7), pages 1-17, March.
    19. Li, Sarengaowa & Chen, Heng & Gao, Yue & Fan, Lanxin & Pan, Peiyuan & Xu, Gang, 2024. "A novel waste-to-energy system based on sludge hydrothermal treatment and medical waste plasma gasification and integrated with the waste heat recovery of a cement plant," Energy, Elsevier, vol. 305(C).
    20. Karl, Jürgen & Pröll, Tobias, 2018. "Steam gasification of biomass in dual fluidized bed gasifiers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 64-78.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:17:y:2025:i:5:p:2040-:d:1600858. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.