Author
Listed:
- Konstantin V. Osintsev
(Department of Industrial Thermal Power Engineering, South Ural State University (National Research University), Chelyabinsk 454080, Russia)
- Evgeny V. Solomin
(Department of Electric Power Generation Stations, Network and Supply-Systems, South Ural State University (National Research University), Chelyabinsk 454080, Russia)
- Gleb N. Ryavkin
(Department of Electric Power Generation Stations, Network and Supply-Systems, South Ural State University (National Research University), Chelyabinsk 454080, Russia)
- Nikita A. Pshenisnov
(Department of Industrial Thermal Power Engineering, South Ural State University (National Research University), Chelyabinsk 454080, Russia)
Abstract
During the operation of any source of electrical energy, thermal energy is also generated. The heating of generator parts is accompanied by the loss of the efficiency of the entire system as a whole and eventually leads to failure. In order to remove the heat load from generators based on renewable energy, such as wind turbines and solar panels, it is possible to use heat pumps based on various refrigerants. This article presents a comparative analysis of methods for evaluating the efficiency of the technological process, using the example of increasing the efficiency of the heat pump based on the heat produced by renewable energy installations. An example of improving the efficiency of a laboratory stand is used. Exergetic calculation, fluid selection, an analysis of external sources and emission reduction were performed. This thermal energy transmission system uses a solar panel as an additional low-potential source of heat. Options for increasing the energy efficiency of the installation are considered. An assessment of the reduction in emissions when using an equivalent diesel power plant was carried out using the developed mathematical model.
Suggested Citation
Konstantin V. Osintsev & Evgeny V. Solomin & Gleb N. Ryavkin & Nikita A. Pshenisnov, 2024.
"A Case Study and Scientific Nexus of a Hybrid Solar and Wind Power Plant with a Heat Pump for Emission Decarbonization,"
Sustainability, MDPI, vol. 16(12), pages 1-13, June.
Handle:
RePEc:gam:jsusta:v:16:y:2024:i:12:p:5221-:d:1418112
Download full text from publisher
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:12:p:5221-:d:1418112. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.