IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i17p11062-d906955.html
   My bibliography  Save this article

Highly Concentrated Solar Flux of Large Fresnel Lens Using CCD Camera-Based Method

Author

Listed:
  • Kexin Zhang

    (School of New Energy, North China Electric Power University, Beijing 102206, China)

  • Ying Su

    (Institute of Science and Technology, China Three Gorges Corporation, Beijing 100038, China)

  • Haiyu Wang

    (School of New Energy, North China Electric Power University, Beijing 102206, China)

  • Qian Wang

    (Institute of Science and Technology, China Three Gorges Corporation, Beijing 100038, China)

  • Kai Wang

    (School of New Energy, North China Electric Power University, Beijing 102206, China)

  • Yisen Niu

    (School of New Energy, North China Electric Power University, Beijing 102206, China)

  • Jifeng Song

    (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China)

Abstract

Fresnel lens is a kind of lens that can concentrate sunlight up to a level of thousands of suns with small space occupation which is widely used in the research of sunlight concentration and transmission systems via optical fiber. Most studies on the concentrated flux of lenses use experimental methods to measure the flux distribution on the receiver of parabolic trough solar concentrators, solar power towers, and parabolic dish concentrators, while for Fresnel lenses, especially large-aperture Fresnel lenses such as the one in this manuscript, the simulation approach was mostly used. In response to this problem, this study has developed an experimental system for measuring the concentrated flux density of Fresnel lenses. A charge-coupled device (CCD) camera was used to capture the image of spot of large-aperture (968 mm) Fresnel lenses in the CCD camera-based method, and a heat flow meter was used to calibrate the spot brightness image obtained by the CCD camera. Experimental data show that the peak flux of concentrated spot can reach 4.06 MW/m 2 . This method confirms the simulation results of previous studies that using the rays tracing method, that is, the flux level of the Fresnel lenses can reach 5000 suns. The experimental results demonstrated the CCD camera-based method combined with a heat flow meter is competent in measuring the intensity of flux with a level of 5000 suns.

Suggested Citation

  • Kexin Zhang & Ying Su & Haiyu Wang & Qian Wang & Kai Wang & Yisen Niu & Jifeng Song, 2022. "Highly Concentrated Solar Flux of Large Fresnel Lens Using CCD Camera-Based Method," Sustainability, MDPI, vol. 14(17), pages 1-16, September.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:17:p:11062-:d:906955
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/17/11062/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/17/11062/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Lee, Hyunjin & Chai, Kwankyo & Kim, Jongkyu & Lee, Sangnam & Yoon, Hwanki & Yu, Changkyun & Kang, Yongheack, 2014. "Optical performance evaluation of a solar furnace by measuring the highly concentrated solar flux," Energy, Elsevier, vol. 66(C), pages 63-69.
    2. Eck, Markus & Steinmann, Wolf-Dieter & Rheinländer, Jürgen, 2004. "Maximum temperature difference in horizontal and tilted absorber pipes with direct steam generation," Energy, Elsevier, vol. 29(5), pages 665-676.
    3. Faisal Masood & Nursyarizal Bin Mohd Nor & Perumal Nallagownden & Irraivan Elamvazuthi & Rahman Saidur & Mohammad Azad Alam & Javed Akhter & Mohammad Yusuf & Mubbashar Mehmood & Mujahid Ali, 2022. "A Review of Recent Developments and Applications of Compound Parabolic Concentrator-Based Hybrid Solar Photovoltaic/Thermal Collectors," Sustainability, MDPI, vol. 14(9), pages 1-30, May.
    4. Ulmer, Steffen & Lüpfert, Eckhard & Pfänder, Markus & Buck, Reiner, 2004. "Calibration corrections of solar tower flux density measurements," Energy, Elsevier, vol. 29(5), pages 925-933.
    5. Hai Wang & Jin Huang & Mengjie Song & Yanxin Hu & Yunfeng Wang & Zijian Lu, 2018. "Simulation and Experimental Study on the Optical Performance of a Fixed-Focus Fresnel Lens Solar Concentrator Using Polar-Axis Tracking," Energies, MDPI, vol. 11(4), pages 1-16, April.
    6. Georgios E. Arnaoutakis & Dimitris Al. Katsaprakakis, 2021. "Concentrating Solar Power Advances in Geometric Optics, Materials and System Integration," Energies, MDPI, vol. 14(19), pages 1-25, September.
    7. Chinnasamy Subramaniyan & Jothirathinam Subramani & Balasubramanian Kalidasan & Natarajan Anbuselvan & Thangaraj Yuvaraj & Natarajan Prabaharan & Tomonobu Senjyu, 2021. "Investigation on the Optical Design and Performance of a Single-Axis-Tracking Solar Parabolic trough Collector with a Secondary Reflector," Sustainability, MDPI, vol. 13(17), pages 1-19, September.
    8. José A. López-Álvarez & Miguel Larrañeta & Elena Pérez-Aparicio & Manuel A. Silva-Pérez & Isidoro Lillo-Bravo, 2021. "An Approach to the Operation Modes and Strategies for Integrated Hybrid Parabolic Trough and Photovoltaic Solar Systems," Sustainability, MDPI, vol. 13(8), pages 1-21, April.
    9. Song, Jifeng & Wu, Zhaoxuan & Wang, Juntao & Zhang, Kexin & Wang, Kai & Liu, Kunhao & Duan, Liqiang & Hou, Hongjuan, 2021. "Application of highly concentrated sunlight transmission and daylighting indoor via plastic optical fibers with comprehensive cooling approaches," Renewable Energy, Elsevier, vol. 180(C), pages 1391-1404.
    10. Ballestrín, J. & Monterreal, R., 2004. "Hybrid heat flux measurement system for solar central receiver evaluation," Energy, Elsevier, vol. 29(5), pages 915-924.
    11. He, Ya-Ling & Xiao, Jie & Cheng, Ze-Dong & Tao, Yu-Bing, 2011. "A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector," Renewable Energy, Elsevier, vol. 36(3), pages 976-985.
    12. Hai Wang & Yanxin Hu & Jinqing Peng & Mengjie Song & Haoteng Li, 2021. "Effects of Receiver Parameters on Solar Flux Distribution for Triangle Cavity Receiver in the Fixed Linear-Focus Fresnel Lens Solar Concentrator," Sustainability, MDPI, vol. 13(11), pages 1-21, May.
    13. Peter King & Christopher Sansom & Paul Comley, 2019. "Photogrammetry for Concentrating Solar Collector Form Measurement, Validated Using a Coordinate Measuring Machine," Sustainability, MDPI, vol. 12(1), pages 1-20, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Song, Jifeng & Yang, Genben & Wang, Haiyu & Niu, Yisen & Hou, Hongjuan & Su, Ying & Wang, Qian & Zou, Zubing, 2022. "Influence of sunshape and optical error on spillover of concentrated flux in solar thermal power tower plant," Energy, Elsevier, vol. 256(C).
    2. Evangelos Bellos & Dimitrios N. Korres & Christos Tzivanidis, 2023. "Investigation of a Compound Parabolic Collector with a Flat Glazing," Sustainability, MDPI, vol. 15(5), pages 1-17, February.
    3. Guilong Dai & Ying Zhuang & Xiaoyu Wang & Xue Chen & Chuang Sun & Shenghua Du, 2022. "Experimental Investigation on the Vector Characteristics of Concentrated Solar Radiation Flux Map," Energies, MDPI, vol. 16(1), pages 1-15, December.
    4. Xiao, Gang & Guo, Kaikai & Xu, Weiping & Ni, Mingjiang & Luo, Zhongyang & Cen, Kefa, 2014. "An improved method of Lambertian CCD-camera radiation flux measurement based on SMARTS (simple model of the atmospheric radiative transfer of sunshine) to reduce spectral errors," Energy, Elsevier, vol. 67(C), pages 74-80.
    5. Wang, P. & Liu, D.Y. & Xu, C., 2013. "Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams," Applied Energy, Elsevier, vol. 102(C), pages 449-460.
    6. Lee, Hyunjin & Chai, Kwankyo & Kim, Jongkyu & Lee, Sangnam & Yoon, Hwanki & Yu, Changkyun & Kang, Yongheack, 2014. "Optical performance evaluation of a solar furnace by measuring the highly concentrated solar flux," Energy, Elsevier, vol. 66(C), pages 63-69.
    7. Yang, Bin & Liu, Shuaishuai & Zhang, Ruirui & Yu, Xiaohui, 2022. "Influence of reflector installation errors on optical-thermal performance of parabolic trough collectors based on a MCRT - FVM coupled model," Renewable Energy, Elsevier, vol. 185(C), pages 1006-1017.
    8. Zhiying Cui & Fengwu Bai & Zhifeng Wang & Fuqiang Wang, 2019. "Influences of Optical Factors on the Performance of the Solar Furnace," Energies, MDPI, vol. 12(20), pages 1-18, October.
    9. Sandá, Antonio & Moya, Sara L. & Valenzuela, Loreto, 2019. "Modelling and simulation tools for direct steam generation in parabolic-trough solar collectors: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    10. Liew, Nicholas J.Y. & Lee, Hyun-Jin, 2019. "Numerical analysis of hybrid photovoltaic-thermal systems utilizing different spectral bandpass filters," Renewable Energy, Elsevier, vol. 144(C), pages 15-29.
    11. Xu, Yang & Li, Ming-Jia & Zheng, Zhang-Jing & Xue, Xiao-Dai, 2018. "Melting performance enhancement of phase change material by a limited amount of metal foam: Configurational optimization and economic assessment," Applied Energy, Elsevier, vol. 212(C), pages 868-880.
    12. Bitam, El Wardi & Demagh, Yassine & Hachicha, Ahmed A. & Benmoussa, Hocine & Kabar, Yassine, 2018. "Numerical investigation of a novel sinusoidal tube receiver for parabolic trough technology," Applied Energy, Elsevier, vol. 218(C), pages 494-510.
    13. Wang, Ruilin & Qu, Wanjun & Hong, Hui & Sun, Jie & Jin, Hongguang, 2018. "Experimental performance of 300 kWth prototype of parabolic trough collector with rotatable axis and irreversibility analysis," Energy, Elsevier, vol. 161(C), pages 595-609.
    14. Mwesigye, Aggrey & Meyer, Josua P., 2017. "Optimal thermal and thermodynamic performance of a solar parabolic trough receiver with different nanofluids and at different concentration ratios," Applied Energy, Elsevier, vol. 193(C), pages 393-413.
    15. Haneol Kim & Jongkyu Kim, 2021. "Numerical Study on Optics and Heat Transfer of Solar Reactor for Methane Thermal Decomposition," Energies, MDPI, vol. 14(20), pages 1-21, October.
    16. Lei, Dongqiang & Fu, Xuqiang & Ren, Yucong & Yao, Fangyuan & Wang, Zhifeng, 2019. "Temperature and thermal stress analysis of parabolic trough receivers," Renewable Energy, Elsevier, vol. 136(C), pages 403-413.
    17. Ju, Xing & Abd El-Samie, Mostafa M. & Xu, Chao & Yu, Hangyu & Pan, Xinyu & Yang, Yongping, 2020. "A fully coupled numerical simulation of a hybrid concentrated photovoltaic/thermal system that employs a therminol VP-1 based nanofluid as a spectral beam filter," Applied Energy, Elsevier, vol. 264(C).
    18. Yang, S. & Sensoy, T.S. & Ordonez, J.C., 2018. "Dynamic 3D volume element model of a parabolic trough solar collector for simulation and optimization," Applied Energy, Elsevier, vol. 217(C), pages 509-526.
    19. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    20. Jose Manuel Barrera & Alejandro Reina & Alejandro Maté & Juan Carlos Trujillo, 2020. "Solar Energy Prediction Model Based on Artificial Neural Networks and Open Data," Sustainability, MDPI, vol. 12(17), pages 1-20, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:17:p:11062-:d:906955. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.