IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v12y2024i1p147-d1312085.html
   My bibliography  Save this article

The Co-Processing Combustion Characteristics of Municipal Sludge within an Industrial Cement Decomposition Furnace via Computational Fluid Dynamics

Author

Listed:
  • Ling Zhu

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

  • Ya Mao

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

  • Kang Liu

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

  • Chengguang Tong

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

  • Quan Liu

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

  • Qiang Xie

    (School of Mechanical and Electronic Engineering, Wuhan University of Technology, Luoshi Road, Wuhan 430070, China)

Abstract

Dealing with municipal sludge in an effective way is crucial for urban development and environmental protection. Co-processing the sludge by burning it in a decomposition furnace in the cement production line has been found to be a viable solution. This work aims to analyze the effects of the co-disposal of municipal sludge on the decomposition reactions and NOx emissions in the decomposing furnaces. Specifically, a practical 6000 t/d decomposition furnace was taken as the research object. To achieve this, ANSYS FLUENT with a UDF (user-defined function) was applied to establish a numerical model coupling the limestone decomposition reaction, fuel combustion, and NOx generation and reduction reactions. The flow, temperature, and component field distributions within the furnace with no sludge were firstly simulated with this model. Compared with site test results, the model was validated. Then, with sludge involved, the structure and operation parameters of the decomposition furnace for the co-disposal of municipal sludge were investigated by simulating the flow field, temperature field, and component field distributions. Parametric studies were carried out in three perspectives, i.e., sludge mixing ratio, preheating furnace arrangement height, and sludge particle size. The results show that all three aspects have great importance in the discomposing process. A set of preferable values, including a sludge mixing ratio of 10%, preheating furnace height of 21.5 m, and sludge particle diameter of 1.0 mm, was obtained, which resulted in a raw material decomposition rate of 89.9% and a NO volume fraction of 251 ppm at the furnace outlet.

Suggested Citation

  • Ling Zhu & Ya Mao & Kang Liu & Chengguang Tong & Quan Liu & Qiang Xie, 2024. "The Co-Processing Combustion Characteristics of Municipal Sludge within an Industrial Cement Decomposition Furnace via Computational Fluid Dynamics," Mathematics, MDPI, vol. 12(1), pages 1-27, January.
    • Handle: RePEc:gam:jmathe:v:12:y:2024:i:1:p:147-:d:1312085
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/12/1/147/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/12/1/147/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Yin, Chungen & Yan, Jinyue, 2016. "Oxy-fuel combustion of pulverized fuels: Combustion fundamentals and modeling," Applied Energy, Elsevier, vol. 162(C), pages 742-762.
    2. Chengguang Tong & Zuobing Chen & Xin Chen & Qiang Xie, 2023. "Research and Development of an Industrial Denitration-Used Burner with Multiple Ejectors via Computational Fluid Dynamics Analysis," Mathematics, MDPI, vol. 11(16), pages 1-19, August.
    3. Mikulčić, Hrvoje & von Berg, Eberhard & Vujanović, Milan & Wang, Xuebin & Tan, Houzhang & Duić, Neven, 2016. "Numerical evaluation of different pulverized coal and solid recovered fuel co-firing modes inside a large-scale cement calciner," Applied Energy, Elsevier, vol. 184(C), pages 1292-1305.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gu, Tianbao & Yin, Chungen & Ma, Wenchao & Chen, Guanyi, 2019. "Municipal solid waste incineration in a packed bed: A comprehensive modeling study with experimental validation," Applied Energy, Elsevier, vol. 247(C), pages 127-139.
    2. Kang, Panxing & Zhang, Guangyi & Ge, Zefeng & Zha, Zhenting & Zhang, Huiyan, 2022. "Three-dimensional modelling and optimization of an industrial dual fluidized bed biomass gasification decoupling combustion reactor," Applied Energy, Elsevier, vol. 311(C).
    3. Li, Yueh-Heng & Lin, Hsien-Tsung & Xiao, Kai-Lin & Lasek, Janusz, 2018. "Combustion behavior of coal pellets blended with Miscanthus biochar," Energy, Elsevier, vol. 163(C), pages 180-190.
    4. Stančin, H. & Mikulčić, H. & Wang, X. & Duić, N., 2020. "A review on alternative fuels in future energy system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    5. Meng, Wenliang & Wang, Dongliang & Zhou, Huairong & Yang, Yong & Li, Hongwei & Liao, Zuwei & Yang, Siyu & Hong, Xiaodong & Li, Guixian, 2023. "Carbon dioxide from oxy-fuel coal-fired power plant integrated green ammonia for urea synthesis: Process modeling, system analysis, and techno-economic evaluation," Energy, Elsevier, vol. 278(C).
    6. Zhang, Xin & Chen, Zhichao & Hou, Jian & Liu, Zheng & Zeng, Lingyan & Li, Zhengqi, 2022. "Evaluation of wide-range coal combustion performance of a novel down-fired combustion technology based on gas–solid two-phase flow characteristics," Energy, Elsevier, vol. 248(C).
    7. Hanak, Dawid P. & Powell, Dante & Manovic, Vasilije, 2017. "Techno-economic analysis of oxy-combustion coal-fired power plant with cryogenic oxygen storage," Applied Energy, Elsevier, vol. 191(C), pages 193-203.
    8. Wu, Haiqian & Kuang, Min & Wang, Jialin & Zhao, Xiaojuan & Yang, Guohua & Ti, Shuguang & Ding, Jieyi, 2020. "Lower-arch location effect on the flow field, coal combustion, and NOx formation characteristics in a cascade-arch, down-fired furnace," Applied Energy, Elsevier, vol. 268(C).
    9. Li, Shiyuan & Li, Haoyu & Li, Wei & Xu, Mingxin & Eddings, Eric G. & Ren, Qiangqiang & Lu, Qinggang, 2017. "Coal combustion emission and ash formation characteristics at high oxygen concentration in a 1MWth pilot-scale oxy-fuel circulating fluidized bed," Applied Energy, Elsevier, vol. 197(C), pages 203-211.
    10. Bu, Changsheng & Gómez-Barea, Alberto & Chen, Xiaoping & Leckner, Bo & Liu, Daoyin & Pallarès, David & Lu, Ping, 2016. "Effect of CO2 on oxy-fuel combustion of coal-char particles in a fluidized bed: Modeling and comparison with the conventional mode of combustion," Applied Energy, Elsevier, vol. 177(C), pages 247-259.
    11. Díez, Luis I. & García-Mariaca, Alexander & Canalís, Paula & Llera, Eva, 2023. "Oxy-combustion characteristics of torrefied biomass and blends under O2/N2, O2/CO2 and O2/CO2/H2O atmospheres," Energy, Elsevier, vol. 284(C).
    12. Li, Shiyuan & Xu, Mingxin & Jia, Lufei & Tan, Li & Lu, Qinggang, 2016. "Influence of operating parameters on N2O emission in O2/CO2 combustion with high oxygen concentration in circulating fluidized bed," Applied Energy, Elsevier, vol. 173(C), pages 197-209.
    13. Mansir, Ibrahim B. & Ben-Mansour, Rached & Habib, Mohamed A., 2018. "Oxy-fuel combustion in a two-pass oxygen transport reactor for fire tube boiler application," Applied Energy, Elsevier, vol. 229(C), pages 828-840.
    14. Caposciutti, Gianluca & Antonelli, Marco, 2018. "Experimental investigation on air displacement and air excess effect on CO, CO2 and NOx emissions of a small size fixed bed biomass boiler," Renewable Energy, Elsevier, vol. 116(PA), pages 795-804.
    15. Habib, Mohamed A. & Imteyaz, Binash & Nemitallah, Medhat A., 2020. "Second law analysis of premixed and non-premixed oxy-fuel combustion cycles utilizing oxygen separation membranes," Applied Energy, Elsevier, vol. 259(C).
    16. Lupiáñez, Carlos & Carmen Mayoral, M. & Díez, Luis I. & Pueyo, Eloy & Espatolero, Sergio & Manuel Andrés, J., 2016. "The role of limestone during fluidized bed oxy-combustion of coal and biomass," Applied Energy, Elsevier, vol. 184(C), pages 670-680.
    17. Gyeong-Min Kim & Jong-Pil Kim & Kevin Yohanes Lisandy & Chung-Hwan Jeon, 2017. "Experimental Model Development of Oxygen-Enriched Combustion Kinetics on Porous Coal Char and Non-Porous Graphite," Energies, MDPI, vol. 10(9), pages 1-14, September.
    18. Chowdhury, A.S.M. Arifur & Bugarin, Luz & Badhan, Antara & Choudhuri, Ahsan & Love, Norman, 2016. "Thermodynamic analysis of a directly heated oxyfuel supercritical power system," Applied Energy, Elsevier, vol. 179(C), pages 261-271.
    19. Wu, Zhiqiang & Yang, Wangcai & Meng, Haiyu & Zhao, Jun & Chen, Lin & Luo, Zhengyuan & Wang, Shuzhong, 2017. "Physicochemical structure and gasification reactivity of co-pyrolysis char from two kinds of coal blended with lignocellulosic biomass: Effects of the carboxymethylcellulose sodium," Applied Energy, Elsevier, vol. 207(C), pages 96-106.
    20. Janusz Kotowicz & Sebastian Michalski & Mateusz Brzęczek, 2019. "The Characteristics of a Modern Oxy-Fuel Power Plant," Energies, MDPI, vol. 12(17), pages 1-34, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:12:y:2024:i:1:p:147-:d:1312085. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.