IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v6y2013i7p3373-3391d27066.html
   My bibliography  Save this article

Feasibility of a Simple Small Wind Turbine with Variable-Speed Regulation Made of Commercial Components

Author

Listed:
  • Andrés Bravo Cuesta

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

  • Francisco Javier Gomez-Gil

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

  • Juan Vicente Martín Fraile

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

  • Jesús Ausín Rodríguez

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

  • Justo Ruiz Calvo

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

  • Jesús Peláez Vara

    (Department of Electromechanical Engineering, University of Burgos, Avda. Cantabria s/n, Burgos 09006, Spain)

Abstract

The aim of this study was to propose and evaluate a very small wind turbine (VSWT) that competes with commercial grid-connected VSWTs in terms of simplicity, robustness and price. Its main components are a squirrel-cage induction generator (SCIG) driven by a frequency converter. The system has a direct-drive shaft, and may be constructed with commercial equipment. Simulation of the wind turbine effect is done with a motor. A control program regulates the variable-speed of rotation through three operational modes: (i) to drive the turbine to its optimum operation point; (ii) to limit its maximum rotational speed; and (iii) to limit the maximum power it generates. Two tests were performed, in order to evaluate the dynamic response of this system under variable wind speeds. The tests demonstrate that the system operates at the optimum operational point of the turbine, and within the set limits of maximum rotational speed and maximum generated power. The drop in performance in relation to its nominal value is about 75%, when operating at 50% of the nominal power. In summary, this VSWT with its proposed control program is feasible and reliable for operating direct-shaft grid-connected VSWTs.

Suggested Citation

  • Andrés Bravo Cuesta & Francisco Javier Gomez-Gil & Juan Vicente Martín Fraile & Jesús Ausín Rodríguez & Justo Ruiz Calvo & Jesús Peláez Vara, 2013. "Feasibility of a Simple Small Wind Turbine with Variable-Speed Regulation Made of Commercial Components," Energies, MDPI, vol. 6(7), pages 1-19, July.
    • Handle: RePEc:gam:jeners:v:6:y:2013:i:7:p:3373-3391:d:27066
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/6/7/3373/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/6/7/3373/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Manfred Lenzen, 2010. "Current State of Development of Electricity-Generating Technologies: A Literature Review," Energies, MDPI, vol. 3(3), pages 1-130, March.
    2. Baroudi, Jamal A. & Dinavahi, Venkata & Knight, Andrew M., 2007. "A review of power converter topologies for wind generators," Renewable Energy, Elsevier, vol. 32(14), pages 2369-2385.
    3. Ioannis D. Margaris & Anca D. Hansen & Poul Sørensen & Nikolaos D. Hatziargyriou, 2010. "Illustration of Modern Wind Turbine Ancillary Services," Energies, MDPI, vol. 3(6), pages 1-13, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Marco Palmieri & Salvatore Bozzella & Giuseppe Leonardo Cascella & Marco Bronzini & Marco Torresi & Francesco Cupertino, 2018. "Wind Micro-Turbine Networks for Urban Areas: Optimal Design and Power Scalability of Permanent Magnet Generators," Energies, MDPI, vol. 11(10), pages 1-21, October.
    2. Oscar Barambones & Jose A. Cortajarena & Patxi Alkorta & Jose M. Gonzalez De Durana, 2014. "A Real-Time Sliding Mode Control for a Wind Energy System Based on a Doubly Fed Induction Generator," Energies, MDPI, vol. 7(10), pages 1-22, October.
    3. Jose Roberto Razo-Hernandez & Ismael Urbina-Salas & Guillermo Tapia-Tinoco & Juan Pablo Amezquita-Sanchez & Martin Valtierra-Rodriguez & David Granados-Lieberman, 2020. "Improved Performance of M-Class PMUs Based on a Magnitude Compensation Model for Wide Frequency Deviations," Mathematics, MDPI, vol. 8(8), pages 1-21, August.
    4. Tarek Nahdi & Dusan Maga, 2018. "Comparative Study of Frequency Converters for Doubly Fed Induction Machines," Sustainability, MDPI, vol. 10(3), pages 1-17, February.
    5. Zahra Sefidgar & Amir Ahmadi Joneidi & Ahmad Arabkoohsar, 2023. "A Comprehensive Review on Development and Applications of Cross-Flow Wind Turbines," Sustainability, MDPI, vol. 15(5), pages 1-39, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hansen, Anca D. & Altin, Müfit & Margaris, Ioannis D. & Iov, Florin & Tarnowski, Germán C., 2014. "Analysis of the short-term overproduction capability of variable speed wind turbines," Renewable Energy, Elsevier, vol. 68(C), pages 326-336.
    2. Gottschamer, L. & Zhang, Q., 2016. "Interactions of factors impacting implementation and sustainability of renewable energy sourced electricity," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 164-174.
    3. Díaz-González, Francisco & Sumper, Andreas & Gomis-Bellmunt, Oriol & Villafáfila-Robles, Roberto, 2012. "A review of energy storage technologies for wind power applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(4), pages 2154-2171.
    4. Hong, Sanghyun & Bradshaw, Corey J.A. & Brook, Barry W., 2014. "Nuclear power can reduce emissions and maintain a strong economy: Rating Australia’s optimal future electricity-generation mix by technologies and policies," Applied Energy, Elsevier, vol. 136(C), pages 712-725.
    5. Dixon, Christopher & Reynolds, Steve & Rodley, David, 2016. "Micro/small wind turbine power control for electrolysis applications," Renewable Energy, Elsevier, vol. 87(P1), pages 182-192.
    6. Zhang, Cai Wen & Zhang, Tieling & Chen, Nan & Jin, Tongdan, 2013. "Reliability modeling and analysis for a novel design of modular converter system of wind turbines," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 86-94.
    7. Amir, Asim & Amir, Aamir & Che, Hang Seng & Elkhateb, Ahmad & Rahim, Nasrudin Abd, 2019. "Comparative analysis of high voltage gain DC-DC converter topologies for photovoltaic systems," Renewable Energy, Elsevier, vol. 136(C), pages 1147-1163.
    8. Krajacic, Goran & Duic, Neven & Carvalho, Maria da Graça, 2011. "How to achieve a 100% RES electricity supply for Portugal?," Applied Energy, Elsevier, vol. 88(2), pages 508-517, February.
    9. Pavković, D. & Hoić, M. & Deur, J. & Petrić, J., 2014. "Energy storage systems sizing study for a high-altitude wind energy application," Energy, Elsevier, vol. 76(C), pages 91-103.
    10. Farihan Mohamad & Jiashen Teh & Ching-Ming Lai & Liang-Rui Chen, 2018. "Development of Energy Storage Systems for Power Network Reliability: A Review," Energies, MDPI, vol. 11(9), pages 1-19, August.
    11. Francesca Ceglia & Adriano Macaluso & Elisa Marrasso & Carlo Roselli & Laura Vanoli, 2020. "Energy, Environmental, and Economic Analyses of Geothermal Polygeneration System Using Dynamic Simulations," Energies, MDPI, vol. 13(18), pages 1-34, September.
    12. Shih-Chieh Huang & Shang-Lien Lo & Yen-Ching Lin, 2013. "To Re-Explore the Causality between Barriers to Renewable Energy Development: A Case Study of Wind Energy," Energies, MDPI, vol. 6(9), pages 1-24, August.
    13. Xie, Da & Lu, Yupu & Sun, Junbo & Gu, Chenghong, 2017. "Small signal stability analysis for different types of PMSGs connected to the grid," Renewable Energy, Elsevier, vol. 106(C), pages 149-164.
    14. Sareni, B. & Abdelli, A. & Roboam, X. & Tran, D.H., 2009. "Model simplification and optimization of a passive wind turbine generator," Renewable Energy, Elsevier, vol. 34(12), pages 2640-2650.
    15. Josip Lorincz & Ivana Bule & Milutin Kapov, 2014. "Performance Analyses of Renewable and Fuel Power Supply Systems for Different Base Station Sites," Energies, MDPI, vol. 7(12), pages 1-31, November.
    16. Nasiri, M. & Milimonfared, J. & Fathi, S.H., 2015. "A review of low-voltage ride-through enhancement methods for permanent magnet synchronous generator based wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 47(C), pages 399-415.
    17. Kumar, Dipesh & Chatterjee, Kalyan, 2016. "A review of conventional and advanced MPPT algorithms for wind energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 957-970.
    18. Lacour, S. & Chinese, T. & Alkadee, D. & Perilhon, C. & Descombes, G., 2012. "Energy and environmental balance of biogas for dual-fuel mobile applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(3), pages 1745-1753.
    19. Karami, M. Amin & Farmer, Justin R. & Inman, Daniel J., 2013. "Parametrically excited nonlinear piezoelectric compact wind turbine," Renewable Energy, Elsevier, vol. 50(C), pages 977-987.
    20. Arifujjaman, Md., 2013. "Reliability comparison of power electronic converters for grid-connected 1.5kW wind energy conversion system," Renewable Energy, Elsevier, vol. 57(C), pages 348-357.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:6:y:2013:i:7:p:3373-3391:d:27066. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.