IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i24p6380-d1546903.html
   My bibliography  Save this article

Review of Thermal Calculation Methods for Boilers—Perspectives on Thermal Optimization for Improving Ecological Parameters

Author

Listed:
  • Bartosz Ciupek

    (Faculty of Environmental Engineering and Energy, Institute of Thermal Energy, Poznan University of Technology, 60-965 Poznan, Poland)

  • Andrzej Frąckowiak

    (Faculty of Environmental Engineering and Energy, Institute of Thermal Energy, Poznan University of Technology, 60-965 Poznan, Poland)

Abstract

This article presents an overview of thermal calculation methods used in boilers powered by fossil fuels (solid, liquid or gas). The analysis was carried out mainly in terms of combustion chamber calculation methods. Changing standards and legal regulations regarding the use of fossil fuels in Europe and the world make it necessary to adapt calculation methods and boiler design to current requirements, and many of them are related to outdated boiler models or for fuels that are no longer so heavily used in industrial solutions. Current research and development trends implemented in the EU and in the world related to the issues of the European Green Deal, the Fit for 55 directive and other ecological trends in the energy sector make it necessary to verify and remodel the calculation methods used so far in terms of the thermal efficiency of the device, fuel consumption or the use of fuels not previously used in their wide range in a wider application. Hence, the knowledge and updating of the state of knowledge in the field of the thermal calculation of boilers in terms of their environmental performance is necessary and strongly sought after by researchers. It is undoubted that in the next few years, boilers will continue to be the main source of thermal energy, especially in the power industry or industry. A reasonable energy transition should be based on the direction of the thermal optimization of already functioning structures and adaptation of their operating parameters to the planned new ecological fuels in the sense of the intensification of energy converted from primary form to thermal energy, and in the last step, it should reorganize the energy and industrial sectors, leaving only these groups of devices treated as a stable and necessary source of energy. Therefore, it should be recognized that activities aimed at improving the thermal parameters of boilers should directly improve the thermal efficiency of the device, and this will translate into fuel savings and reduce their negative impact on the environment.

Suggested Citation

  • Bartosz Ciupek & Andrzej Frąckowiak, 2024. "Review of Thermal Calculation Methods for Boilers—Perspectives on Thermal Optimization for Improving Ecological Parameters," Energies, MDPI, vol. 17(24), pages 1-15, December.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:24:p:6380-:d:1546903
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/24/6380/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/24/6380/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wei, Haiqiao & Zhu, Tianyu & Shu, Gequn & Tan, Linlin & Wang, Yuesen, 2012. "Gasoline engine exhaust gas recirculation – A review," Applied Energy, Elsevier, vol. 99(C), pages 534-544.
    2. Arkadiusz Puszkarek & Lech Dorobczyński & Maciej Kozak, 2024. "Main Ships Propulsion Boiler Control and Hardware-in-Loop Model Implementation," Energies, MDPI, vol. 17(17), pages 1-26, September.
    3. Ahmadi Babadi, Keyvan & Khorasanizadeh, Hossein & Mirzazadeh, Ghorbanali & Mirzazadeh, Soheil, 2024. "Numerical simulations and an experimental study for optimal design of a 1500 kW water-tube condensing boiler," Energy, Elsevier, vol. 307(C).
    4. de Diego, L.F. & de las Obras-Loscertales, M. & Rufas, A. & García-Labiano, F. & Gayán, P. & Abad, A. & Adánez, J., 2013. "Pollutant emissions in a bubbling fluidized bed combustor working in oxy-fuel operating conditions: Effect of flue gas recirculation," Applied Energy, Elsevier, vol. 102(C), pages 860-867.
    5. Malico, Isabel & Nepomuceno Pereira, Ricardo & Gonçalves, Ana Cristina & Sousa, Adélia M.O., 2019. "Current status and future perspectives for energy production from solid biomass in the European industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 960-977.
    6. Ozgen, S. & Cernuschi, S. & Caserini, S., 2021. "An overview of nitrogen oxides emissions from biomass combustion for domestic heat production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    7. Caposciutti, Gianluca & Barontini, Federica & Antonelli, Marco & Tognotti, Leonardo & Desideri, Umberto, 2018. "Experimental investigation on the air excess and air displacement influence on early stage and complete combustion gaseous emissions of a small scale fixed bed biomass boiler," Applied Energy, Elsevier, vol. 216(C), pages 576-587.
    8. Liu, Xingrang & Bansal, R.C., 2014. "Integrating multi-objective optimization with computational fluid dynamics to optimize boiler combustion process of a coal fired power plant," Applied Energy, Elsevier, vol. 130(C), pages 658-669.
    9. Zhu, Meng & Chen, Lei & Zhou, Lingang & Jiang, Long & Su, Sheng & Hu, Song & Xu, Kai & Wang, Can & Li, Aishu & Qing, Haoran & Zhou, Jing & Wang, Yi & Li, Hanjian & Xiang, Jun, 2023. "Experimental test, numerical analysis and thermal calculation modeling of hundreds kWth-class supercritical CO2 fossil-fired boiler system," Energy, Elsevier, vol. 284(C).
    10. Wu, Chunying & Sun, Lingfang & Piao, Heng & Yao, Lijia, 2024. "Adaptive fuzzy finite time integral sliding mode control of the coordinated system for 350 MW supercritical once-through boiler unit to enhance flexibility," Energy, Elsevier, vol. 302(C).
    11. Judt, W. & Ciupek, B. & Urbaniak, R., 2020. "Numerical study of a heat transfer process in a low power heating boiler equipped with afterburning chamber," Energy, Elsevier, vol. 196(C).
    12. Piotr Sołowiej & Maciej Neugebauer & Ogulcan Esmer, 2024. "Coffee Grounds as an Additive to Wood Pellets," Energies, MDPI, vol. 17(18), pages 1-13, September.
    13. Madejski, Paweł & Taler, Dawid & Taler, Jan, 2022. "Thermal and flow calculations of platen superheater in large scale CFB boiler," Energy, Elsevier, vol. 258(C).
    14. Singh, Renu & Shukla, Ashish, 2014. "A review on methods of flue gas cleaning from combustion of biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 854-864.
    15. Yali Tong & Jiajia Gao & Jingyun Ma, 2023. "Emission Characteristics, Speciation, and Potential Environmental Risks of Heavy Metals from Coal-Fired Boilers: A Review," Sustainability, MDPI, vol. 15(15), pages 1-15, July.
    16. Oleg Milovanov & Dmitry Klimov & Sergey Kuzmin & Sergey Grigoriev & Alexander Mikhalev & Rafail Isemin & Mathieu Brulé, 2024. "Application of Torrefaction for Improved Fuel Properties of Sunflower Husks," Energies, MDPI, vol. 17(18), pages 1-13, September.
    17. Bujak, Janusz, 2009. "Optimal control of energy losses in multi-boiler steam systems," Energy, Elsevier, vol. 34(9), pages 1260-1270.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bartosz Ciupek & Rafał Urbaniak & Dobrosława Kinalska & Zbigniew Nadolny, 2024. "Flue Gas Recirculation System for Biomass Heating Boilers—Research and Technical Applications for Reductions in Nitrogen Oxides (NO x ) Emissions," Energies, MDPI, vol. 17(1), pages 1-16, January.
    2. Bartosz Ciupek & Karol Gołoś & Radosław Jankowski & Zbigniew Nadolny, 2021. "Effect of Hard Coal Combustion in Water Steam Environment on Chemical Composition of Exhaust Gases," Energies, MDPI, vol. 14(20), pages 1-24, October.
    3. Jaworek, A. & Sobczyk, A.T. & Marchewicz, A. & Krupa, A. & Czech, T., 2021. "Particulate matter emission control from small residential boilers after biomass combustion. A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    4. Grzegorz Zając & Jacek Gładysz & Joanna Szyszlak-Bargłowicz, 2025. "Effect of Changes in Mains Voltage on the Operation of the Low-Power Pellet Boiler," Energies, MDPI, vol. 18(3), pages 1-17, January.
    5. Tang, Wei & Feng, Huijun & Chen, Lingen & Xie, Zhuojun & Shi, Junchao, 2021. "Constructal design for a boiler economizer," Energy, Elsevier, vol. 223(C).
    6. Woon, Kok Sin & Phuang, Zhen Xin & Taler, Jan & Varbanov, Petar Sabev & Chong, Cheng Tung & Klemeš, Jiří Jaromír & Lee, Chew Tin, 2023. "Recent advances in urban green energy development towards carbon emissions neutrality," Energy, Elsevier, vol. 267(C).
    7. Anufriev, I.S., 2021. "Review of water/steam addition in liquid-fuel combustion systems for NOx reduction: Waste-to-energy trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    8. Artur Kraszkiewicz & Artur Przywara & Stanisław Parafiniuk, 2022. "Emission of Nitric Oxide during the Combustion of Various Forms of Solid Biofuels in a Low-Power Heating Device," Energies, MDPI, vol. 15(16), pages 1-19, August.
    9. Zadravec, Tomas & Rajh, Boštjan & Kokalj, Filip & Samec, Niko, 2021. "Influence of air staging strategies on flue gas sensible heat losses and gaseous emissions of a wood pellet boiler: An experimental study," Renewable Energy, Elsevier, vol. 178(C), pages 532-548.
    10. Dai, Gaofeng & Zhang, Jiaye & Wang, Xuebin & Tan, Houzhang & Rahman, Zia ur, 2022. "Calcination and desulfurization characteristics of calcium carbonate in pressurized oxy-combustion," Energy, Elsevier, vol. 261(PA).
    11. Soo-Jin Jeong, 2024. "CFD Simulation of Pre-Chamber Spark-Ignition Engines—A Perspective Review," Energies, MDPI, vol. 17(18), pages 1-39, September.
    12. Giuseppe Maggiotto & Gianpiero Colangelo & Marco Milanese & Arturo de Risi, 2023. "Thermochemical Technologies for the Optimization of Olive Wood Biomass Energy Exploitation: A Review," Energies, MDPI, vol. 16(19), pages 1-17, September.
    13. Katarzyna Węglarz & Dawid Taler & Jan Taler & Mateusz Marcinkowski, 2023. "Numerical Modelling of Steam Superheaters in Supercritical Boilers," Energies, MDPI, vol. 16(6), pages 1-19, March.
    14. Yong Zeng & Yanpeng Cai & Guohe Huang & Jing Dai, 2011. "A Review on Optimization Modeling of Energy Systems Planning and GHG Emission Mitigation under Uncertainty," Energies, MDPI, vol. 4(10), pages 1-33, October.
    15. Oboirien, B.O. & Thulari, V. & North, B.C., 2014. "Major and trace elements in coal bottom ash at different oxy coal combustion conditions," Applied Energy, Elsevier, vol. 129(C), pages 207-216.
    16. Li, Shiyuan & Xu, Mingxin & Jia, Lufei & Tan, Li & Lu, Qinggang, 2016. "Influence of operating parameters on N2O emission in O2/CO2 combustion with high oxygen concentration in circulating fluidized bed," Applied Energy, Elsevier, vol. 173(C), pages 197-209.
    17. Eksi, Guner & Karaosmanoglu, Filiz, 2017. "Combined bioheat and biopower: A technology review and an assessment for Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1313-1332.
    18. José Antonio Soriano & Reyes García-Contreras & Antonio José Carpio de Los Pinos, 2021. "Study of the Thermochemical Properties of Lignocellulosic Biomass from Energy Crops," Energies, MDPI, vol. 14(13), pages 1-18, June.
    19. Sharma, Monikankana & N, Rakesh & Dasappa, S., 2016. "Solid oxide fuel cell operating with biomass derived producer gas: Status and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 450-463.
    20. Andwari, Amin Mahmoudzadeh & Aziz, Azhar Abdul & Said, Mohd Farid Muhamad & Latiff, Zulkarnain Abdul, 2014. "Experimental investigation of the influence of internal and external EGR on the combustion characteristics of a controlled auto-ignition two-stroke cycle engine," Applied Energy, Elsevier, vol. 134(C), pages 1-10.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:24:p:6380-:d:1546903. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.