IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i9p3738-d1134202.html
   My bibliography  Save this article

Possibilities of Reducing the Heat Energy Consumption in a Tissue Paper Machine—Case Study

Author

Listed:
  • Mariusz Reczulski

    (Centre of Papermaking and Printing, Lodz University of Technology, 90-924 Lodz, Poland)

  • Włodzimierz Szewczyk

    (Centre of Papermaking and Printing, Lodz University of Technology, 90-924 Lodz, Poland)

  • Michał Kuczkowski

    (Centre of Papermaking and Printing, Lodz University of Technology, 90-924 Lodz, Poland)

Abstract

The article presents studies on the impact of the significant process parameters of a paper machine with a Yankee cylinder on its production capacity and heat energy consumption for drying the paper web. Parameters such as machine speed, web moisture content before and after pressing, parameters of steam supplied to the cylinder and parameters of hot air flowing from the nozzles of the hood were analyzed. The study’s results were used to optimize production to improve the energy efficiency and performance of the machine. In order to use the possible methods of improving the production capacity and heat energy consumption, the parameters of the production process were measured and the basic indicators characterizing the operation of the machine were calculated in the Yankee cylinder–dryer hood system. The correct functioning of the machine components and the possibility of their modernization were also analyzed. Technological and construction changes introduced based on the research results made it possible to increase the production capacity by 10% and to reduce the consumption of heat energy per 1 ton of produced paper by 16.3%. The article presents a description of changes in the technology of paper production and modernization of the tissue machine made in the years 2013–2022.

Suggested Citation

  • Mariusz Reczulski & Włodzimierz Szewczyk & Michał Kuczkowski, 2023. "Possibilities of Reducing the Heat Energy Consumption in a Tissue Paper Machine—Case Study," Energies, MDPI, vol. 16(9), pages 1-15, April.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:9:p:3738-:d:1134202
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/9/3738/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/9/3738/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Maedeh Rahnama Mobarakeh & Miguel Santos Silva & Thomas Kienberger, 2021. "Pulp and Paper Industry: Decarbonisation Technology Assessment to Reach CO 2 Neutral Emissions—An Austrian Case Study," Energies, MDPI, vol. 14(4), pages 1-30, February.
    2. Chen, Xiaobin & Man, Yi & Zheng, Qifu & Hu, Yusha & Li, Jigeng & Hong, Mengna, 2019. "Industrial verification of energy saving for the single-tier cylinder based paper drying process," Energy, Elsevier, vol. 170(C), pages 261-272.
    3. Prince Waqas Khan & Yongjun Kim & Yung-Cheol Byun & Sang-Joon Lee, 2021. "Influencing Factors Evaluation of Machine Learning-Based Energy Consumption Prediction," Energies, MDPI, vol. 14(21), pages 1-22, November.
    4. Monika Górska & Marta Daroń, 2021. "Importance of Machine Modernization in Energy Efficiency Management of Manufacturing Companies," Energies, MDPI, vol. 14(24), pages 1-19, December.
    5. Laurijssen, Jobien & De Gram, Frans J. & Worrell, Ernst & Faaij, Andre, 2010. "Optimizing the energy efficiency of conventional multi-cylinder dryers in the paper industry," Energy, Elsevier, vol. 35(9), pages 3738-3750.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nejad, Alireza Mahdavi, 2021. "A new drying approach deploying solid-solid phase change material: A numerical study," Energy, Elsevier, vol. 232(C).
    2. Furszyfer Del Rio, Dylan D. & Sovacool, Benjamin K. & Griffiths, Steve & Bazilian, Morgan & Kim, Jinsoo & Foley, Aoife M. & Rooney, David, 2022. "Decarbonizing the pulp and paper industry: A critical and systematic review of sociotechnical developments and policy options," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    3. Gluesenkamp, Kyle R. & Boudreaux, Philip & Patel, Viral K. & Goodman, Dakota & Shen, Bo, 2019. "An efficient correlation for heat and mass transfer effectiveness in tumble-type clothes dryer drums," Energy, Elsevier, vol. 172(C), pages 1225-1242.
    4. Chen, Hua-Wei & Hsu, Chung-Hsuan & Hong, Gui-Bing, 2012. "The case study of energy flow analysis and strategy in pulp and paper industry," Energy Policy, Elsevier, vol. 43(C), pages 448-455.
    5. Caglayan, Hasan & Caliskan, Hakan, 2017. "Sustainability assessment of heat exchanger units for spray dryers," Energy, Elsevier, vol. 124(C), pages 741-751.
    6. Thanongsak Imjai & Chirawat Wattanapanich & Uhamard Madardam & Reyes Garcia, 2021. "Analysis of Ink/Toner Savings of English and Thai Ecofonts for Sustainable Printing," Sustainability, MDPI, vol. 13(7), pages 1-17, April.
    7. Utlu, Zafer & Kincay, Olcay, 2013. "An assessment of a pulp and paper mill through energy and exergy analyses," Energy, Elsevier, vol. 57(C), pages 565-573.
    8. Walmsley, Timothy G. & Walmsley, Michael R.W. & Atkins, Martin J. & Neale, James R. & Tarighaleslami, Amir H., 2015. "Thermo-economic optimisation of industrial milk spray dryer exhaust to inlet air heat recovery," Energy, Elsevier, vol. 90(P1), pages 95-104.
    9. Gradov, Dmitry Vladimirovich & Yusuf, Yusuf Oluwatoki & Ohjainen, Jussi & Suuronen, Jarkko & Eskola, Roope & Roininen, Lassi & Koiranen, Tuomas, 2022. "Modelling of a continuous veneer drying unit of industrial scale and model-based ANOVA of the energy efficiency," Energy, Elsevier, vol. 244(PA).
    10. Fleiter, Tobias & Fehrenbach, Daniel & Worrell, Ernst & Eichhammer, Wolfgang, 2012. "Energy efficiency in the German pulp and paper industry – A model-based assessment of saving potentials," Energy, Elsevier, vol. 40(1), pages 84-99.
    11. Bianca Goia & Tudor Cioara & Ionut Anghel, 2022. "Virtual Power Plant Optimization in Smart Grids: A Narrative Review," Future Internet, MDPI, vol. 14(5), pages 1-22, April.
    12. Andrzej Pacana & Karolina Czerwińska & Grzegorz Ostasz, 2023. "Analysis of the Level of Efficiency of Control Methods in the Context of Energy Intensity," Energies, MDPI, vol. 16(8), pages 1-26, April.
    13. Xiwen Cui & Xinyu Guan & Dongyu Wang & Dongxiao Niu & Xiaomin Xu, 2022. "Can China Meet Its 2030 Total Energy Consumption Target? Based on an RF-SSA-SVR-KDE Model," Energies, MDPI, vol. 15(16), pages 1-13, August.
    14. Chen, Xiaobin & Man, Yi & Zheng, Qifu & Hu, Yusha & Li, Jigeng & Hong, Mengna, 2019. "Industrial verification of energy saving for the single-tier cylinder based paper drying process," Energy, Elsevier, vol. 170(C), pages 261-272.
    15. Luis Miguel Calvo & Rosario Domingo, 2017. "CO 2 Emissions Reduction and Energy Efficiency Improvements in Paper Making Drying Process Control by Sensors," Sustainability, MDPI, vol. 9(4), pages 1-17, March.
    16. Pusnik, M. & Al-Mansour, F. & Sucic, B. & Cesen, M., 2017. "Trends and prospects of energy efficiency development in Slovenian industry," Energy, Elsevier, vol. 136(C), pages 52-62.
    17. Lai, Changzhi & Wang, Yu & Fan, Kai & Cai, Qilin & Ye, Qing & Pang, Haoqiang & Wu, Xi, 2022. "An improved forecasting model of short-term electric load of papermaking enterprises for production line optimization," Energy, Elsevier, vol. 245(C).
    18. Di Marco, Paolo & Frigo, Stefano & Gabbrielli, Roberto & Pecchia, Stefano, 2016. "Mathematical modelling and energy performance assessment of air impingement drying systems for the production of tissue paper," Energy, Elsevier, vol. 114(C), pages 201-213.
    19. Junsong Jia & Jing Lei & Chundi Chen & Xu Song & Yexi Zhong, 2021. "Contribution of Renewable Energy Consumption to CO 2 Emission Mitigation: A Comparative Analysis from a Global Geographic Perspective," Sustainability, MDPI, vol. 13(7), pages 1-23, March.
    20. Marta Daroń & Monika Górska, 2023. "Relationships between Selected Quality Tools and Energy Efficiency in Production Processes," Energies, MDPI, vol. 16(13), pages 1-20, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:9:p:3738-:d:1134202. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.