IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i8p3423-d1122642.html
   My bibliography  Save this article

A Review on the Preliminary Design of Axial and Radial Turbines for Small-Scale Organic Rankine Cycle

Author

Listed:
  • Enhua Wang

    (School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China)

  • Ningjian Peng

    (School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China)

Abstract

Organic Rankine cycle (ORC) is an effective technology to harness low-grade energy. Turbine, as a key component of ORC, takes advantages of its high efficiency and compact size compared with other expanders. Currently, developing suitable turbines with a high performance and a low cost is one of the bottlenecks for wide applications of various ORCs. In this context, technical progress on radial inflow turbines (RITs), axial turbines (ATs), and radial outflow turbines (ROTs) is introduced, and loss models used in the preliminary design are compared, especially for small-scale ORCs. RIT is recommended for medium and small ORCs with an expansion pressure ratio of <10. The power outs and rotational speeds of the designed RITs spanned the ranges of 9.3–684 kW and 3000–114,000 r/min with an efficiency of 56.1–91.75%. In comparison, the power outputs and speeds of ATs were 3–2446 kW and 3000–91,800 r/min with an efficiency of 63–89.1%. AT is suitable for large-scale ORCs with a power output of greater than hundreds of kW. However, AT with impulse stages is feasible for small-scale ORCs when the pressure ratio is high, and the mass flow rate is small. The power outputs of the designed ROTs were relatively small, at 10–400 kW with a speed of 7200–42,700 r/min and an efficiency of 68.7–85%. For organic working fluids with a large expansion pressure ratio, ROT might be employed. Conventional mean-line models may neglect the effects of supersonic flow, which will be encountered in many ORC turbines. Therefore, adequate models for supersonic expansion loss and shock loss need to be added. Meanwhile, a proper multivariable optimization algorithm such as a gradient-based or stochastic search method should be selected. Finally, the challenges and potential research directions are discussed. The outcomes can provide some insights for the development of ORC turbines and the optimization of ORC systems.

Suggested Citation

  • Enhua Wang & Ningjian Peng, 2023. "A Review on the Preliminary Design of Axial and Radial Turbines for Small-Scale Organic Rankine Cycle," Energies, MDPI, vol. 16(8), pages 1-20, April.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:8:p:3423-:d:1122642
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/8/3423/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/8/3423/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Peng, Ningjian & Wang, Enhua & Wang, Wenli, 2023. "Design and analysis of a 1.5 kW single-stage partial-admission impulse turbine for low-grade energy utilization," Energy, Elsevier, vol. 268(C).
    2. Da Lio, Luca & Manente, Giovanni & Lazzaretto, Andrea, 2014. "New efficiency charts for the optimum design of axial flow turbines for organic Rankine cycles," Energy, Elsevier, vol. 77(C), pages 447-459.
    3. Jankowski, Marcin & Klonowicz, Piotr & Borsukiewicz, Aleksandra, 2021. "Multi-objective optimization of an ORC power plant using one-dimensional design of a radial-inflow turbine with backswept rotor blades," Energy, Elsevier, vol. 237(C).
    4. Hagen, Brede A.L. & Agromayor, Roberto & Nekså, Petter, 2021. "Equation-oriented methods for design optimization and performance analysis of radial inflow turbines," Energy, Elsevier, vol. 237(C).
    5. Jun-Seong Kim & Do-Yeop Kim, 2020. "Preliminary Design and Off-Design Analysis of a Radial Outflow Turbine for Organic Rankine Cycles," Energies, MDPI, vol. 13(8), pages 1-18, April.
    6. Angelo La Seta & Andrea Meroni & Jesper Graa Andreasen & Leonardo Pierobon & Giacomo Persico & Fredrik Haglind, 2016. "Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems—Part B: Application on a Case Study," Energies, MDPI, vol. 9(6), pages 1-17, May.
    7. Uusitalo, Antti & Turunen-Saaresti, Teemu & Honkatukia, Juha & Dhanasegaran, Radheesh, 2020. "Experimental study of small scale and high expansion ratio ORC for recovering high temperature waste heat," Energy, Elsevier, vol. 208(C).
    8. Da Lio, Luca & Manente, Giovanni & Lazzaretto, Andrea, 2017. "A mean-line model to predict the design efficiency of radial inflow turbines in organic Rankine cycle (ORC) systems," Applied Energy, Elsevier, vol. 205(C), pages 187-209.
    9. Meroni, Andrea & Robertson, Miles & Martinez-Botas, Ricardo & Haglind, Fredrik, 2018. "A methodology for the preliminary design and performance prediction of high-pressure ratio radial-inflow turbines," Energy, Elsevier, vol. 164(C), pages 1062-1078.
    10. Andrea Meroni & Angelo La Seta & Jesper Graa Andreasen & Leonardo Pierobon & Giacomo Persico & Fredrik Haglind, 2016. "Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems—Part A: Turbine Model," Energies, MDPI, vol. 9(5), pages 1-15, April.
    11. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    12. Shuozhuo Hu & Zhen Yang & Jian Li & Yuanyuan Duan, 2021. "A Review of Multi-Objective Optimization in Organic Rankine Cycle (ORC) System Design," Energies, MDPI, vol. 14(20), pages 1-36, October.
    13. Mustapha Mukhtar & Victor Adebayo & Nasser Yimen & Olusola Bamisile & Emmanuel Osei-Mensah & Humphrey Adun & Qinxiu Zhang & Gexin Luo, 2022. "Towards Global Cleaner Energy and Hydrogen Production: A Review and Application ORC Integrality with Multigeneration Systems," Sustainability, MDPI, vol. 14(9), pages 1-25, April.
    14. Ningjian Peng & Enhua Wang & Hongguang Zhang, 2021. "Preliminary Design of an Axial-Flow Turbine for Small-Scale Supercritical Organic Rankine Cycle," Energies, MDPI, vol. 14(17), pages 1-20, August.
    15. Bao, Junjiang & Zhao, Li, 2013. "A review of working fluid and expander selections for organic Rankine cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 325-342.
    16. Loni, Reyhaneh & Mahian, Omid & Markides, Christos N. & Bellos, Evangelos & le Roux, Willem G. & Kasaeian, Ailbakhsh & Najafi, Gholamhassan & Rajaee, Fatemeh, 2021. "A review of solar-driven organic Rankine cycles: Recent challenges and future outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    17. Fiaschi, Daniele & Manfrida, Giampaolo & Maraschiello, Francesco, 2015. "Design and performance prediction of radial ORC turboexpanders," Applied Energy, Elsevier, vol. 138(C), pages 517-532.
    18. Klonowicz, Piotr & Heberle, Florian & Preißinger, Markus & Brüggemann, Dieter, 2014. "Significance of loss correlations in performance prediction of small scale, highly loaded turbine stages working in Organic Rankine Cycles," Energy, Elsevier, vol. 72(C), pages 322-330.
    19. Rahbar, Kiyarash & Mahmoud, Saad & Al-Dadah, Raya K. & Moazami, Nima, 2015. "Parametric analysis and optimization of a small-scale radial turbine for Organic Rankine Cycle," Energy, Elsevier, vol. 83(C), pages 696-711.
    20. Clemente, Stefano & Micheli, Diego & Reini, Mauro & Taccani, Rodolfo, 2013. "Bottoming organic Rankine cycle for a small scale gas turbine: A comparison of different solutions," Applied Energy, Elsevier, vol. 106(C), pages 355-364.
    21. Da Lio, Luca & Manente, Giovanni & Lazzaretto, Andrea, 2016. "Predicting the optimum design of single stage axial expanders in ORC systems: Is there a single efficiency map for different working fluids?," Applied Energy, Elsevier, vol. 167(C), pages 44-58.
    22. Martin T. White & Abdulnaser I. Sayma, 2018. "A Generalised Assessment of Working Fluids and Radial Turbines for Non-Recuperated Subcritical Organic Rankine Cycles," Energies, MDPI, vol. 11(4), pages 1-26, March.
    23. Costall, A.W. & Gonzalez Hernandez, A. & Newton, P.J. & Martinez-Botas, R.F., 2015. "Design methodology for radial turbo expanders in mobile organic Rankine cycle applications," Applied Energy, Elsevier, vol. 157(C), pages 729-743.
    24. Fiaschi, Daniele & Manfrida, Giampaolo & Maraschiello, Francesco, 2012. "Thermo-fluid dynamics preliminary design of turbo-expanders for ORC cycles," Applied Energy, Elsevier, vol. 97(C), pages 601-608.
    25. Weiß, Andreas P. & Novotný, Václav & Popp, Tobias & Streit, Philipp & Špale, Jan & Zinn, Gerd & Kolovratník, Michal, 2020. "Customized ORC micro turbo-expanders - From 1D design to modular construction kit and prospects of additive manufacturing," Energy, Elsevier, vol. 209(C).
    26. Witanowski, Ł. & Klonowicz, P. & Lampart, P. & Suchocki, T. & Jędrzejewski, Ł. & Zaniewski, D. & Klimaszewski, P., 2020. "Optimization of an axial turbine for a small scale ORC waste heat recovery system," Energy, Elsevier, vol. 205(C).
    27. Tobias Popp & Andreas P. Weiß & Florian Heberle & Julia Winkler & Rüdiger Scharf & Theresa Weith & Dieter Brüggemann, 2021. "Experimental Characterization of an Adaptive Supersonic Micro Turbine for Waste Heat Recovery Applications," Energies, MDPI, vol. 15(1), pages 1-20, December.
    28. Mounier, Violette & Olmedo, Luis Eric & Schiffmann, Jürg, 2018. "Small scale radial inflow turbine performance and pre-design maps for Organic Rankine Cycles," Energy, Elsevier, vol. 143(C), pages 1072-1084.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shaohua Hu & Yaran Liang & Ruochen Ding & Lingli Xing & Wen Su & Xinxing Lin & Naijun Zhou, 2024. "Research on Off-Design Characteristics and Control of an Innovative S-CO 2 Power Cycle Driven by the Flue Gas Waste Heat," Energies, MDPI, vol. 17(8), pages 1-24, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ningjian Peng & Enhua Wang & Hongguang Zhang, 2021. "Preliminary Design of an Axial-Flow Turbine for Small-Scale Supercritical Organic Rankine Cycle," Energies, MDPI, vol. 14(17), pages 1-20, August.
    2. Peng, Ningjian & Wang, Enhua & Wang, Wenli, 2023. "Design and analysis of a 1.5 kW single-stage partial-admission impulse turbine for low-grade energy utilization," Energy, Elsevier, vol. 268(C).
    3. Jankowski, Marcin & Klonowicz, Piotr & Borsukiewicz, Aleksandra, 2021. "Multi-objective optimization of an ORC power plant using one-dimensional design of a radial-inflow turbine with backswept rotor blades," Energy, Elsevier, vol. 237(C).
    4. Meroni, Andrea & Andreasen, Jesper Graa & Persico, Giacomo & Haglind, Fredrik, 2018. "Optimization of organic Rankine cycle power systems considering multistage axial turbine design," Applied Energy, Elsevier, vol. 209(C), pages 339-354.
    5. Al Jubori, Ayad M. & Al-Dadah, Raya K. & Mahmoud, Saad & Daabo, Ahmed, 2017. "Modelling and parametric analysis of small-scale axial and radial-outflow turbines for Organic Rankine Cycle applications," Applied Energy, Elsevier, vol. 190(C), pages 981-996.
    6. Witanowski, Łukasz & Ziółkowski, Paweł & Klonowicz, Piotr & Lampart, Piotr, 2023. "A hybrid approach to optimization of radial inflow turbine with principal component analysis," Energy, Elsevier, vol. 272(C).
    7. Da Lio, Luca & Manente, Giovanni & Lazzaretto, Andrea, 2017. "A mean-line model to predict the design efficiency of radial inflow turbines in organic Rankine cycle (ORC) systems," Applied Energy, Elsevier, vol. 205(C), pages 187-209.
    8. Witanowski, Łukasz & Klonowicz, Piotr & Lampart, Piotr & Klimaszewski, Piotr & Suchocki, Tomasz & Jędrzejewski, Łukasz & Zaniewski, Dawid & Ziółkowski, Paweł, 2023. "Impact of rotor geometry optimization on the off-design ORC turbine performance," Energy, Elsevier, vol. 265(C).
    9. Meroni, Andrea & Robertson, Miles & Martinez-Botas, Ricardo & Haglind, Fredrik, 2018. "A methodology for the preliminary design and performance prediction of high-pressure ratio radial-inflow turbines," Energy, Elsevier, vol. 164(C), pages 1062-1078.
    10. Mounier, Violette & Olmedo, Luis Eric & Schiffmann, Jürg, 2018. "Small scale radial inflow turbine performance and pre-design maps for Organic Rankine Cycles," Energy, Elsevier, vol. 143(C), pages 1072-1084.
    11. Braimakis, Konstantinos & Karellas, Sotirios, 2017. "Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities," Energy, Elsevier, vol. 121(C), pages 570-598.
    12. Andrea Meroni & Angelo La Seta & Jesper Graa Andreasen & Leonardo Pierobon & Giacomo Persico & Fredrik Haglind, 2016. "Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems—Part A: Turbine Model," Energies, MDPI, vol. 9(5), pages 1-15, April.
    13. Kaczmarczyk, Tomasz Z. & Żywica, Grzegorz & Ihnatowicz, Eugeniusz, 2017. "The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC," Energy, Elsevier, vol. 137(C), pages 530-543.
    14. Martin T. White & Abdulnaser I. Sayma, 2018. "A Generalised Assessment of Working Fluids and Radial Turbines for Non-Recuperated Subcritical Organic Rankine Cycles," Energies, MDPI, vol. 11(4), pages 1-26, March.
    15. Palagi, Laura & Sciubba, Enrico & Tocci, Lorenzo, 2019. "A neural network approach to the combined multi-objective optimization of the thermodynamic cycle and the radial inflow turbine for Organic Rankine cycle applications," Applied Energy, Elsevier, vol. 237(C), pages 210-226.
    16. Zou, Aihong & Chassaing, Jean-Camille & Persky, Rodney & Gu, YuanTong & Sauret, Emilie, 2019. "Uncertainty Quantification in high-density fluid radial-inflow turbines for renewable low-grade temperature cycles," Applied Energy, Elsevier, vol. 241(C), pages 313-330.
    17. Lorenzo Tocci & Tamas Pal & Ioannis Pesmazoglou & Benjamin Franchetti, 2017. "Small Scale Organic Rankine Cycle (ORC): A Techno-Economic Review," Energies, MDPI, vol. 10(4), pages 1-26, March.
    18. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    19. He, Wei & Wang, Jihong, 2018. "Optimal selection of air expansion machine in Compressed Air Energy Storage: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 87(C), pages 77-95.
    20. Masi, Massimo & Da Lio, Luca & Lazzaretto, Andrea, 2020. "An insight into the similarity approach to predict the maximum efficiency of organic Rankine cycle turbines," Energy, Elsevier, vol. 198(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:8:p:3423-:d:1122642. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.