IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i6p2616-d1093347.html
   My bibliography  Save this article

Optimization of High-Temperature Electrolysis System for Hydrogen Production Considering High-Temperature Degradation

Author

Listed:
  • Jiming Yuan

    (Engineering Research Center of Large-Scale Reactor Engineering and Technology, Ministry of Education, State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China)

  • Zeming Li

    (Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China)

  • Benfeng Yuan

    (Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China)

  • Guoping Xiao

    (Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
    University of Chinese Academy of Sciences, Beijing 100049, China)

  • Tao Li

    (Engineering Research Center of Large-Scale Reactor Engineering and Technology, Ministry of Education, State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China)

  • Jian-Qiang Wang

    (Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China
    University of Chinese Academy of Sciences, Beijing 100049, China)

Abstract

Solid oxide electrolysis cells (SOECs) have great application prospects because of their excellent performance, but the long-term applications of the stacks are restricted by the structural degradation under the high-temperature conditions. Therefore, an SOEC degradation model is developed and embedded in a process model of the high-temperature steam electrolysis (HTSE) system to investigate the influence of the stack degradation at the system level. The sensitivity analysis and optimization were carried out to study the influence factors of the stack degradation and system hydrogen production efficiency and search for the optimal operating conditions to improve the hydrogen production efficiency and mitigate the stack degradation. The analysis results show that the high temperature and large current density can accelerate the stack degradation but improve the hydrogen production efficiency, while the high temperature gradually becomes unfavorable in the late stage. The low air-to-fuel feed ratio is beneficial to both the degradation rate and hydrogen production efficiency. The results show that the optimization method can improve the hydrogen production efficiency and inhibit the stack degradation effectively. Moreover, part of the hydrogen production efficiency has to be sacrificed in order to obtain a lower stack degradation rate.

Suggested Citation

  • Jiming Yuan & Zeming Li & Benfeng Yuan & Guoping Xiao & Tao Li & Jian-Qiang Wang, 2023. "Optimization of High-Temperature Electrolysis System for Hydrogen Production Considering High-Temperature Degradation," Energies, MDPI, vol. 16(6), pages 1-18, March.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2616-:d:1093347
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/6/2616/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/6/2616/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xing, Xuetao & Lin, Jin & Song, Yonghua & Hu, Qiang & Zhou, You & Mu, Shujun, 2018. "Optimization of hydrogen yield of a high-temperature electrolysis system with coordinated temperature and feed factors at various loading conditions: A model-based study," Applied Energy, Elsevier, vol. 232(C), pages 368-385.
    2. Stephanie E. Wolf & Vaibhav Vibhu & Eric Tröster & Izaak C. Vinke & Rüdiger-A. Eichel & L. G. J. (Bert) de Haart, 2022. "Steam Electrolysis vs. Co-Electrolysis: Mechanistic Studies of Long-Term Solid Oxide Electrolysis Cells," Energies, MDPI, vol. 15(15), pages 1-17, July.
    3. AlZahrani, Abdullah A. & Dincer, Ibrahim, 2018. "Modeling and performance optimization of a solid oxide electrolysis system for hydrogen production," Applied Energy, Elsevier, vol. 225(C), pages 471-485.
    4. Navasa, Maria & Yuan, Jinliang & Sundén, Bengt, 2015. "Computational fluid dynamics approach for performance evaluation of a solid oxide electrolysis cell for hydrogen production," Applied Energy, Elsevier, vol. 137(C), pages 867-876.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mastropasqua, Luca & Pecenati, Ilaria & Giostri, Andrea & Campanari, Stefano, 2020. "Solar hydrogen production: Techno-economic analysis of a parabolic dish-supported high-temperature electrolysis system," Applied Energy, Elsevier, vol. 261(C).
    2. Zhen Zhang & Chengzhi Guan & Leidong Xie & Jian-Qiang Wang, 2022. "Design and Analysis of a Novel Opposite Trapezoidal Flow Channel for Solid Oxide Electrolysis Cell Stack," Energies, MDPI, vol. 16(1), pages 1-11, December.
    3. Ramon Yoshiura & Sarah Creasman & Aaron Epiney, 2023. "Engineering-Scale Integrated Energy System Data Projection Demonstration via the Dynamic Energy Transport and Integration Laboratory," Energies, MDPI, vol. 16(16), pages 1-40, August.
    4. Xing, Xuetao & Lin, Jin & Song, Yonghua & Hu, Qiang & Zhou, You & Mu, Shujun, 2018. "Optimization of hydrogen yield of a high-temperature electrolysis system with coordinated temperature and feed factors at various loading conditions: A model-based study," Applied Energy, Elsevier, vol. 232(C), pages 368-385.
    5. Youchan Kim & Kisung Lim & Hassan Salihi & Seongku Heo & Hyunchul Ju, 2023. "The Effects of Stack Configurations on the Thermal Management Capabilities of Solid Oxide Electrolysis Cells," Energies, MDPI, vol. 17(1), pages 1-20, December.
    6. Mohsen Fallah Vostakola & Hasan Ozcan & Rami S. El-Emam & Bahman Amini Horri, 2023. "Recent Advances in High-Temperature Steam Electrolysis with Solid Oxide Electrolysers for Green Hydrogen Production," Energies, MDPI, vol. 16(8), pages 1-50, April.
    7. Xia, Zhiping & Zhao, Dongqi & Li, Yuanzheng & Deng, Zhonghua & Kupecki, Jakub & Fu, Xiaowei & Li, Xi, 2023. "Control-oriented dynamic process optimization of solid oxide electrolysis cell system with the gas characteristic regarding oxygen electrode delamination," Applied Energy, Elsevier, vol. 332(C).
    8. Sriram Srinivas & Shankar Raman Dhanushkodi & Ramesh Kumar Chidambaram & Dorota Skrzyniowska & Anna Korzen & Jan Taler, 2023. "Benchmarking Electrolytes for the Solid Oxide Electrolyzer Using a Finite Element Model," Energies, MDPI, vol. 16(18), pages 1-15, September.
    9. Eveloy, Valerie, 2019. "Hybridization of solid oxide electrolysis-based power-to-methane with oxyfuel combustion and carbon dioxide utilization for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 550-571.
    10. d’Amore-Domenech, Rafael & Santiago, Óscar & Leo, Teresa J., 2020. "Multicriteria analysis of seawater electrolysis technologies for green hydrogen production at sea," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    11. Jalili, Mohammad & Ghazanfari Holagh, Shahriyar & Chitsaz, Ata & Song, Jian & Markides, Christos N., 2023. "Electrolyzer cell-methanation/Sabatier reactors integration for power-to-gas energy storage: Thermo-economic analysis and multi-objective optimization," Applied Energy, Elsevier, vol. 329(C).
    12. Sun, Yang & Wang, Ligang & Xu, Cheng & Van herle, Jan & Maréchal, François & Yang, Yongping, 2020. "Enhancing the operational flexibility of thermal power plants by coupling high-temperature power-to-gas," Applied Energy, Elsevier, vol. 263(C).
    13. Kang, Zhenye & Mo, Jingke & Yang, Gaoqiang & Li, Yifan & Talley, Derrick A. & Retterer, Scott T. & Cullen, David A. & Toops, Todd J. & Brady, Michael P. & Bender, Guido & Pivovar, Bryan S. & Green, Jo, 2017. "Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells," Applied Energy, Elsevier, vol. 206(C), pages 983-990.
    14. Patil, Tarkeshwar C. & Duttagupta, Siddhartha P., 2016. "Micro-Solid Oxide Fuel Cell: A multi-fuel approach for portable applications," Applied Energy, Elsevier, vol. 168(C), pages 534-543.
    15. Meng, Xiuxia & Liu, Yongna & Yang, Naitao & Tan, Xiaoyao & Liu, Jian & Diniz da Costa, João C. & Liu, Shaomin, 2017. "Highly compact and robust hollow fiber solid oxide cells for flexible power generation and gas production," Applied Energy, Elsevier, vol. 205(C), pages 741-748.
    16. Song, Chunfeng & Liu, Qingling & Ji, Na & Kansha, Yasuki & Tsutsumi, Atsushi, 2015. "Optimization of steam methane reforming coupled with pressure swing adsorption hydrogen production process by heat integration," Applied Energy, Elsevier, vol. 154(C), pages 392-401.
    17. Navas-Anguita, Zaira & García-Gusano, Diego & Dufour, Javier & Iribarren, Diego, 2020. "Prospective techno-economic and environmental assessment of a national hydrogen production mix for road transport," Applied Energy, Elsevier, vol. 259(C).
    18. Wang, Ligang & Chen, Ming & Küngas, Rainer & Lin, Tzu-En & Diethelm, Stefan & Maréchal, François & Van herle, Jan, 2019. "Power-to-fuels via solid-oxide electrolyzer: Operating window and techno-economics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 174-187.
    19. Choi, Bokkyu & Panthi, Dhruba & Nakoji, Masateru & Tsutsumi, Kaduo & Tsutsumi, Atsushi, 2017. "Design and performance evaluation of a novel 1kW-class hydrogen production/power generation system," Applied Energy, Elsevier, vol. 194(C), pages 296-303.
    20. Lee, Boreum & Lim, Dongjun & Lee, Hyunjun & Lim, Hankwon, 2021. "Which water electrolysis technology is appropriate?: Critical insights of potential water electrolysis for green ammonia production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2616-:d:1093347. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.