IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i5p1472-d512906.html
   My bibliography  Save this article

Thermal Mapping of a High-Speed Electric Motor Used for Traction Applications and Analysis of Various Cooling Methods—A Review

Author

Listed:
  • Edison Gundabattini

    (Department of Thermal and Energy Engineering, Vellore Institute of Technology (VIT), School of Mechanical Engineering, Vellore 632 014, Tamilnadu, India)

  • Arkadiusz Mystkowski

    (Faculty of Electrical Engineering, Bialystok University of Technology, Wiejska 45D, 15 351 Bialystok, Poland)

  • Adam Idzkowski

    (Faculty of Electrical Engineering, Bialystok University of Technology, Wiejska 45D, 15 351 Bialystok, Poland)

  • Raja Singh R.

    (Department of Energy and Power Electronics, Vellore Institute of Technology (VIT), School of Electrical Engineering, Vellore 632 014, Tamilnadu, India)

  • Darius Gnanaraj Solomon

    (Department of Design and Automation, Vellore Institute of Technology (VIT), School of Mechanical Engineering, Vellore 632 014, Tamilnadu, India)

Abstract

This paper gives a comprehensive review of advanced cooling schemes and their applications to the permanent magnet synchronous motors (PMSMs), as well as investigating the electrical motor’s topologies its thermal design issues, materials and performances. Particularly, the electromagnetic and electric performances, machine sizing, together with the structural design, are given. In addition, the work addresses the motor’s material design and properties along with its insulation performance, which is the main goal of optimization. Mainly, thermal mapping with analysis is provided according to the different cooling methods, including air-cooling, water-cooling, oil-cooling, heat-pipe-cooling, potting silicon gelatin cooling, and as well as cooling strategies for tubes and microchannels. The most common special features and demands of the PMSMs are described in the appearance of the motor’s failures caused by uncontrolled temperature rise. In addition, heat sources and energy losses, including copper loss, core loss versus motor speed, and output power, are analyzed. The review of the proposed cooling methods that will achieve the required heat transfer of the PMSM is presented with numerical simulations and measurements data. A review of numerical methods and results, including the finite element methods (FEM), such as the Ansys CFD software, to obtain a high-accuracy thermal mapping model of the PMSM system is given. The revived methods and design requirements due to PMSM temperature profile and cooling flow at different rotor speeds and torque loads are investigated. Finally, the motor design recommendations, including the newly developed cooling solutions, which enable it to effectively redistribute the temperature and heat transfer, increasing the efficiency of the PMSM machine, are laid out.

Suggested Citation

  • Edison Gundabattini & Arkadiusz Mystkowski & Adam Idzkowski & Raja Singh R. & Darius Gnanaraj Solomon, 2021. "Thermal Mapping of a High-Speed Electric Motor Used for Traction Applications and Analysis of Various Cooling Methods—A Review," Energies, MDPI, vol. 14(5), pages 1-32, March.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:5:p:1472-:d:512906
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/5/1472/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/5/1472/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Jilong Zhao & Xiaowei Quan & Mengdie Jing & Mingyao Lin & Nian Li, 2018. "Design, Analysis and Model Predictive Control of an Axial Field Switched-Flux Permanent Magnet Machine for Electric Vehicle/Hybrid Electric Vehicle Applications," Energies, MDPI, vol. 11(7), pages 1-22, July.
    2. Xueping Xu & Qinkai Han & Fulei Chu, 2018. "Review of Electromagnetic Vibration in Electrical Machines," Energies, MDPI, vol. 11(7), pages 1-33, July.
    3. Markus Henke & Gerrit Narjes & Jan Hoffmann & Constantin Wohlers & Stefan Urbanek & Christian Heister & Jörn Steinbrink & Wolf-Rüdiger Canders & Bernd Ponick, 2018. "Challenges and Opportunities of Very Light High-Performance Electric Drives for Aviation," Energies, MDPI, vol. 11(2), pages 1-25, February.
    4. Ji-Young Lee & Phuong Thi Luu, 2020. "Electric Motor Design of an Integrated Motor Propulsor for Unmanned Vehicles: The Effect of Waterproofing Can," Energies, MDPI, vol. 13(9), pages 1-12, May.
    5. Hai Guo & Qun Ding & Yifan Song & Haoran Tang & Likun Wang & Jingying Zhao, 2020. "Predicting Temperature of Permanent Magnet Synchronous Motor Based on Deep Neural Network," Energies, MDPI, vol. 13(18), pages 1-14, September.
    6. Jouhara, H. & Chauhan, A. & Nannou, T. & Almahmoud, S. & Delpech, B. & Wrobel, L.C., 2017. "Heat pipe based systems - Advances and applications," Energy, Elsevier, vol. 128(C), pages 729-754.
    7. Gang Lei & Jianguo Zhu & Youguang Guo & Chengcheng Liu & Bo Ma, 2017. "A Review of Design Optimization Methods for Electrical Machines," Energies, MDPI, vol. 10(12), pages 1-31, November.
    8. Da-Chen Pang & Zhen-Jia Shi & Pei-Xuan Xie & Hua-Chih Huang & Gia-Thinh Bui, 2020. "Investigation of an Inset Micro Permanent Magnet Synchronous Motor Using Soft Magnetic Composite Material," Energies, MDPI, vol. 13(17), pages 1-11, August.
    9. Alexandra C. Barmpatza & Joya C. Kappatou, 2018. "Finite Element Method Investigation and Loss Estimation of a Permanent Magnet Synchronous Generator Feeding a Non-Linear Load," Energies, MDPI, vol. 11(12), pages 1-19, December.
    10. Fulai Guo & Chengning Zhang, 2019. "Oil-Cooling Method of the Permanent Magnet Synchronous Motor for Electric Vehicle," Energies, MDPI, vol. 12(15), pages 1-11, August.
    11. Thanh Anh Huynh & Min-Fu Hsieh, 2018. "Performance Analysis of Permanent Magnet Motors for Electric Vehicles (EV) Traction Considering Driving Cycles," Energies, MDPI, vol. 11(6), pages 1-24, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Junjie Zhao & Bin Zhang & Xiaoli Fu & Shenglin Yan, 2021. "Numerical Study on the Influence of Vortex Generator Arrangement on Heat Transfer Enhancement of Oil-Cooled Motor," Energies, MDPI, vol. 14(21), pages 1-17, October.
    2. Zeyang Fan & Hong Yi & Jian Xu & Kun Xie & Yue Qi & Sailin Ren & Hongdong Wang, 2021. "Performance Study and Optimization Design of High-Speed Amorphous Alloy Induction Motor," Energies, MDPI, vol. 14(9), pages 1-19, April.
    3. Jae-Hyun Kim & Kyoung-Soo Cha & Sung-Woo Hwang & Soo-Gyung Lee & Min-Ro Park & Young-Doo Yoon & Myung-Seop Lim, 2021. "Analysis of Effect of the Magnetization Distribution of Multi-Pole PM on SPMSM Performance Using Equivalent Magnetic Circuit Considering Dead Zone," Energies, MDPI, vol. 14(11), pages 1-12, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nicolas Bernard & Linh Dang & Luc Moreau & Salvy Bourguet, 2022. "A Pre-Sizing Method for Salient Pole Synchronous Reluctance Machines with Loss Minimization Control for a Small Urban Electrical Vehicle Considering the Driving Cycle," Energies, MDPI, vol. 15(23), pages 1-19, December.
    2. Eui-Hyeok Song & Kye-Bock Lee & Seok-Ho Rhi & Kibum Kim, 2020. "Thermal and Flow Characteristics in a Concentric Annular Heat Pipe Heat Sink," Energies, MDPI, vol. 13(20), pages 1-15, October.
    3. Kravanja, Gregor & Zajc, Gašper & Knez, Željko & Škerget, Mojca & Marčič, Simon & Knez, Maša H., 2018. "Heat transfer performance of CO2, ethane and their azeotropic mixture under supercritical conditions," Energy, Elsevier, vol. 152(C), pages 190-201.
    4. Konstantinos N. Gyftakis & Carlos A. Platero & Yucheng Zhang & Santiago Bernal, 2019. "Diagnosis of Static Eccentricity in 3-Phase Synchronous Machines using a Pseudo Zero-Sequence Current," Energies, MDPI, vol. 12(13), pages 1-16, June.
    5. Abel Sancarlos & Chady Ghnatios & Jean-Louis Duval & Nicolas Zerbib & Elias Cueto & Francisco Chinesta, 2021. "Fast Computation of Multi-Parametric Electromagnetic Fields in Synchronous Machines by Using PGD-Based Fully Separated Representations," Energies, MDPI, vol. 14(5), pages 1-17, March.
    6. Shafieian, Abdellah & Khiadani, Mehdi & Nosrati, Ataollah, 2018. "A review of latest developments, progress, and applications of heat pipe solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 95(C), pages 273-304.
    7. Pavol Rafajdus & Valeria Hrabovcova & Pavel Lehocky & Pavol Makys & Filip Holub, 2018. "Effect of Saturation on Field Oriented Control of the New Designed Reluctance Synchronous Motor," Energies, MDPI, vol. 11(11), pages 1-10, November.
    8. Sandra Eriksson, 2019. "Permanent Magnet Synchronous Machines," Energies, MDPI, vol. 12(14), pages 1-5, July.
    9. Sebastian Berhausen & Tomasz Jarek, 2021. "Method of Limiting Shaft Voltages in AC Electric Machines," Energies, MDPI, vol. 14(11), pages 1-19, June.
    10. Chengcheng Liu & Jiawei Lu & Youhua Wang & Gang Lei & Jianguo Zhu & Youguang Guo, 2018. "Design Issues for Claw Pole Machines with Soft Magnetic Composite Cores," Energies, MDPI, vol. 11(8), pages 1-15, August.
    11. Md Sydur Rahman & Grace Firsta Lukman & Pham Trung Hieu & Kwang-Il Jeong & Jin-Woo Ahn, 2021. "Optimization and Characteristics Analysis of High Torque Density 12/8 Switched Reluctance Motor Using Metaheuristic Gray Wolf Optimization Algorithm," Energies, MDPI, vol. 14(7), pages 1-17, April.
    12. Xu, Yanyan & Xue, Yanqin & Qi, Hong & Cai, Weihua, 2021. "An updated review on working fluids, operation mechanisms, and applications of pulsating heat pipes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    13. Da-Chen Pang & Zhen-Jia Shi & Young-Ho Chang & Hua-Chih Huang & Gia-Thinh Bui, 2021. "Investigation of an Interior Micro Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 14(14), pages 1-13, July.
    14. Said Bentouba & Nadjet Zioui & Peter Breuhaus & Mahmoud Bourouis, 2023. "Overview of the Potential of Energy Harvesting Sources in Electric Vehicles," Energies, MDPI, vol. 16(13), pages 1-22, July.
    15. Jouhara, Hussam & Almahmoud, Sulaiman & Chauhan, Amisha & Delpech, Bertrand & Bianchi, Giuseppe & Tassou, Savvas A. & Llera, Rocio & Lago, Francisco & Arribas, Juan José, 2017. "Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry," Energy, Elsevier, vol. 141(C), pages 1928-1939.
    16. Llera, Rocio & Vigil, Miguel & Díaz-Díaz, Sara & Martínez Huerta, Gemma Marta, 2022. "Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry," Energy, Elsevier, vol. 239(PD).
    17. Armagan Bozkurt & Ahmet Fevzi Baba & Yusuf Oner, 2021. "Design of Outer-Rotor Permanent-Magnet-Assisted Synchronous Reluctance Motor for Electric Vehicles," Energies, MDPI, vol. 14(13), pages 1-12, June.
    18. Jing Tang & Yongheng Yang & Frede Blaabjerg & Jie Chen & Lijun Diao & Zhigang Liu, 2018. "Parameter Identification of Inverter-Fed Induction Motors: A Review," Energies, MDPI, vol. 11(9), pages 1-21, August.
    19. Delpech, Bertrand & Axcell, Brian & Jouhara, Hussam, 2019. "Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln," Energy, Elsevier, vol. 170(C), pages 636-651.
    20. Malinauskaite, J. & Jouhara, H., 2019. "The trilemma of waste-to-energy: A multi-purpose solution," Energy Policy, Elsevier, vol. 129(C), pages 636-645.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:5:p:1472-:d:512906. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.