Approaches for Modelling the Physical Behavior of Technical Systems on the Example of Wind Turbines

Models of technical systems are an essential means in design and product-development processes. A large share of technical systems, or at least subsystems, are directly or indirectly connected with the generation or transformation of energies. In design science, elaborated modelling approaches were developed for different levels of product concretization, for instance, requirement models and function models, which support innovation and new product-development processes, as well as for energy-generating or -transforming systems. However, on one product-concretization level, the abstract level that describes the physical behavior, research is less mature, and an overview of the approaches, their respective advantages, and the connection possibilities between them and other modelling forms is difficult to achieve. This paper proposes a novel discussion structure based on modelling perspectives and digital-engineering frameworks. In this structure, current approaches are described and illustrated on the basis of an example of a technical system, a wind turbine. The approaches were compared, and their specific advantages were elaborated. It is a central conclusion that all perspectives could contribute to holistic product modelling. Consequently, combination and integration possibilities were discussed as well. Another contribution is the derivation of future research directions in this field; these were derived both from the identification of “white spots” and the most promising modelling approaches.