IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i22p6141-d449650.html
   My bibliography  Save this article

Numerical and Experimental Analysis of Heat Transfer for Solid Fuels Combustion in Fixed Bed Conditions

Author

Listed:
  • Wojciech Judt

    (Department of Fuels and Renewable Energy, Faculty of Environmental Engineering and Energy, Institute of Thermal Engineering, Poznan University of Technology, 60-965 Poznan, Poland)

Abstract

The paper concerns the analysis of the heat transfer process that occurred during solid fuel burning in fixed bed conditions. The subject of the analysis is a cylindrical combustion chamber with an output of 12 kW heating power equipped with a retort burner for hard coal and biomass combustion. During the research, a numerical and experimental study is performed. The analysis is prepared for various heat load of the combustion chamber, which allowed for the reconstruction of real working conditions for heating devices working with solid fuels combustion. The temperature distribution obtained by the experimental way is compared with results of the numerical modeling. Local distribution of principal heat transfer magnitudes like a heat flux density and a heat transfer coefficient that occurred on the sidewall of the combustion chamber is analyzed. The analysis showed, that the participation of convection and radiation in the overall heat transfer process has resulted from the heat load of the heating device. Research results may be used for improving an analytical approach of design process taking place for domestic and industrial combustion chambers.

Suggested Citation

  • Wojciech Judt, 2020. "Numerical and Experimental Analysis of Heat Transfer for Solid Fuels Combustion in Fixed Bed Conditions," Energies, MDPI, vol. 13(22), pages 1-18, November.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:22:p:6141-:d:449650
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/22/6141/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/22/6141/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Jin, Kaiyuan & Wirz, Richard E., 2020. "Sulfur heat transfer behavior in vertically-oriented and nonuniformly‑heated isochoric thermal energy storage systems," Applied Energy, Elsevier, vol. 260(C).
    2. Li, Nianqi & Chen, Jian & Cheng, Tao & Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Wang, Qiuwang & Yang, Weisheng & Liu, Xia & Zeng, Min, 2020. "Analysing thermal-hydraulic performance and energy efficiency of shell-and-tube heat exchangers with longitudinal flow based on experiment and numerical simulation," Energy, Elsevier, vol. 202(C).
    3. Markus Bösenhofer & Eva-Maria Wartha & Christian Jordan & Michael Harasek, 2018. "The Eddy Dissipation Concept—Analysis of Different Fine Structure Treatments for Classical Combustion," Energies, MDPI, vol. 11(7), pages 1-21, July.
    4. Taler, Dawid & Taler, Jan & Trojan, Marcin, 2020. "Thermal calculations of plate–fin–and-tube heat exchangers with different heat transfer coefficients on each tube row," Energy, Elsevier, vol. 203(C).
    5. Tu, Yaojie & Zhou, Anqi & Xu, Mingchen & Yang, Wenming & Siah, Keng Boon & Subbaiah, Prabakaran, 2018. "NOX reduction in a 40 t/h biomass fired grate boiler using internal flue gas recirculation technology," Applied Energy, Elsevier, vol. 220(C), pages 962-973.
    6. Scharler, Robert & Gruber, Thomas & Ehrenhöfer, Armin & Kelz, Joachim & Bardar, Ramin Mehrabian & Bauer, Thomas & Hochenauer, Christoph & Anca-Couce, Andrés, 2020. "Transient CFD simulation of wood log combustion in stoves," Renewable Energy, Elsevier, vol. 145(C), pages 651-662.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ding, Haixu & Tang, Jian & Qiao, Junfei, 2023. "Dynamic modeling of multi-input and multi-output controlled object for municipal solid waste incineration process," Applied Energy, Elsevier, vol. 339(C).
    2. Magda Joachimiak, 2021. "Analysis of Thermodynamic Parameter Variability in a Chamber of a Furnace for Thermo-Chemical Treatment," Energies, MDPI, vol. 14(10), pages 1-18, May.
    3. Bartosz Ciupek & Wojciech Judt & Karol Gołoś & Rafał Urbaniak, 2021. "Analysis of Low-Power Boilers Work on Real Heat Loads: A Case of Poland," Energies, MDPI, vol. 14(11), pages 1-13, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Seferlis, Panos & Varbanov, Petar Sabev & Papadopoulos, Athanasios I. & Chin, Hon Huin & Klemeš, Jiří Jaromír, 2021. "Sustainable design, integration, and operation for energy high-performance process systems," Energy, Elsevier, vol. 224(C).
    2. Mateusz Marcinkowski & Dawid Taler & Jan Taler & Katarzyna Węglarz, 2021. "Thermal Calculations of Four-Row Plate-Fin and Tube Heat Exchanger Taking into Account Different Air-Side Correlations on Individual Rows of Tubes for Low Reynold Numbers," Energies, MDPI, vol. 14(21), pages 1-13, October.
    3. Liu, Hanyu & Xi, Kun & Xie, Zhihui & Lu, Zhuoqun & Chen, Huawei & Zhang, Jian & Ge, Yanlin, 2023. "Constructal design of double-layer asymmetric flower baffles," Energy, Elsevier, vol. 280(C).
    4. Gu, Tianbao & Yin, Chungen & Ma, Wenchao & Chen, Guanyi, 2019. "Municipal solid waste incineration in a packed bed: A comprehensive modeling study with experimental validation," Applied Energy, Elsevier, vol. 247(C), pages 127-139.
    5. Zeng, Guang & Zhou, Anqi & Fu, Jinming & Ji, Yang, 2022. "Experimental and numerical investigations on NOx formation and reduction mechanisms of pulverized-coal stereo-staged combustion," Energy, Elsevier, vol. 261(PB).
    6. Chen, Tao & Sjöblom, Jonas & Ström, Henrik, 2022. "Numerical investigations of soot generation during wood-log combustion," Applied Energy, Elsevier, vol. 325(C).
    7. Raquel Pérez-Orozco & David Patiño & Jacobo Porteiro & José Luís Míguez, 2020. "Novel Test Bench for the Active Reduction of Biomass Particulate Matter Emissions," Sustainability, MDPI, vol. 12(1), pages 1-13, January.
    8. Mashoofi Maleki, Nemat & Pourahmad, Saman & Haghighi Khoshkhoo, Ramin & Ameri, Mohammad, 2023. "Performance improvement of a double tube heat exchanger using novel electromagnetic vibration (EMV) method in the presence of Al2O3-water and CuO-water nanofluid; An experimental study," Energy, Elsevier, vol. 281(C).
    9. Álvarez-Bermúdez, César & Anca-Couce, Andrés & Chapela, Sergio & Scharler, Robert & Buchmayr, Markus & Gómez, Miguel Ángel & Porteiro, Jacobo, 2023. "Validation of a biomass conversion mechanism by Eulerian modelling of a fixed-bed system under low primary air conditions," Renewable Energy, Elsevier, vol. 215(C).
    10. Li, Nianqi & Klemeš, Jiří Jaromír & Sunden, Bengt & Wang, Qiuwang & Zeng, Min, 2022. "Heat exchanger network optimisation considering different shell-side flow arrangements," Energy, Elsevier, vol. 261(PA).
    11. Marco D’Amato & Annarita Viggiano & Vinicio Magi, 2020. "On the Turbulence-Chemistry Interaction of an HCCI Combustion Engine," Energies, MDPI, vol. 13(22), pages 1-23, November.
    12. Mateusz Marcinkowski & Dawid Taler & Jan Taler & Katarzyna Węglarz, 2022. "Air-Side Nusselt Numbers and Friction Factor’s Individual Correlations of Finned Heat Exchangers," Energies, MDPI, vol. 15(15), pages 1-17, August.
    13. Zadravec, Tomas & Yin, Chungen & Kokalj, Filip & Samec, Niko & Rajh, Boštjan, 2020. "The impacts of different profiles of the grate inlet conditions on freeboard CFD in a waste wood-fired grate boiler," Applied Energy, Elsevier, vol. 268(C).
    14. Silvia Macchitella & Gianpiero Colangelo & Giuseppe Starace, 2023. "Performance Prediction of Plate-Finned Tube Heat Exchangers for Refrigeration: A Review on Modeling and Optimization Methods," Energies, MDPI, vol. 16(4), pages 1-30, February.
    15. Míguez, José Luis & Porteiro, Jacobo & Behrendt, Frank & Blanco, Diana & Patiño, David & Dieguez-Alonso, Alba, 2021. "Review of the use of additives to mitigate operational problems associated with the combustion of biomass with high content in ash-forming species," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    16. Valentina Fortunato & Andreas Giraldo & Mehdi Rouabah & Rabia Nacereddine & Michel Delanaye & Alessandro Parente, 2018. "Experimental and Numerical Investigation of a MILD Combustion Chamber for Micro Gas Turbine Applications," Energies, MDPI, vol. 11(12), pages 1-21, December.
    17. Reyes, Y.A. & Pérez, M. & Barrera, E.L. & Martínez, Y. & Cheng, K.K., 2022. "Thermochemical conversion processes of Dichrostachys cinerea as a biofuel: A review of the Cuban case," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    18. Chang, Hongliang & Han, Zeran & Li, Xionghui & Ma, Ting & Wang, Qiuwang, 2022. "Experimental investigation on heat transfer performance based on average thermal-resistance ratio for supercritical carbon dioxide in asymmetric airfoil-fin printed circuit heat exchanger," Energy, Elsevier, vol. 254(PB).
    19. Węglarz, Katarzyna & Taler, Dawid & Taler, Jan, 2022. "New non-iterative method for computation of tubular cross-flow heat exchangers," Energy, Elsevier, vol. 260(C).
    20. Dawid Taler & Jan Taler & Marcin Trojan, 2020. "Experimental Verification of an Analytical Mathematical Model of a Round or Oval Tube Two-Row Car Radiator," Energies, MDPI, vol. 13(13), pages 1-23, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:22:p:6141-:d:449650. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.