IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v203y2020ics0360544220309130.html
   My bibliography  Save this article

Thermal calculations of plate–fin–and-tube heat exchangers with different heat transfer coefficients on each tube row

Author

Listed:
  • Taler, Dawid
  • Taler, Jan
  • Trojan, Marcin

Abstract

In finned tube heat exchangers, the first rows of tubes are most effective when the air velocity in front of the exchanger is less than about 3.5 m/s. The heat transfer coefficient (HTC) decreases with each subsequent row and stabilizes only from the fifth row onwards. The paper examines a two-pass double-row plate-fin and tube heat exchanger (PFTHE) made of circular or oval pipes. A method for determining the air side Nusselt number on individual pipe row was developed, using the results of CFD (Computational Fluid Dynamics) modelling of the heat exchanger. Also, a heat transfer correlation was found for the mean HTC for the whole PFTHE using CFD modelling. The correlations based on the results of CFD modelling match very well the empirical correlations based on experimental tests of two car radiators. The analysis shows that the first rows of PFTHE are the most effective in terms of thermal effectiveness. By building a heat exchanger with two rows of pipes, it is possible to reduce investment expenditures at the same thermal output significantly. Heating systems with PFTHE air heaters with fewer rows of pipes are characterized by lower fuel consumption due to their higher efficiency. The investment costs for automotive radiators can also be reduced. The introduction of PFTHE heat exchangers with fewer pipe rows has a positive impact on the environment. Both material expenditures on the construction of PFTHE, energy consumption by the air fan, and fuel consumption for heating purposes are reduced.

Suggested Citation

  • Taler, Dawid & Taler, Jan & Trojan, Marcin, 2020. "Thermal calculations of plate–fin–and-tube heat exchangers with different heat transfer coefficients on each tube row," Energy, Elsevier, vol. 203(C).
    • Handle: RePEc:eee:energy:v:203:y:2020:i:c:s0360544220309130
    DOI: 10.1016/j.energy.2020.117806
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220309130
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117806?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Halıcı, Fethi & Taymaz, İmdat & Gündüz, Mehmet, 2001. "The effect of the number of tube rows on heat, mass and momentum transfer in flat-plate finned tube heat exchangers," Energy, Elsevier, vol. 26(11), pages 963-972.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wojciech Judt, 2020. "Numerical and Experimental Analysis of Heat Transfer for Solid Fuels Combustion in Fixed Bed Conditions," Energies, MDPI, vol. 13(22), pages 1-18, November.
    2. Taler, Dawid & Taler, Jan & Wrona, Katarzyna, 2021. "New analytical-numerical method for modelling of tube cross-flow heat exchangers with complex flow systems," Energy, Elsevier, vol. 228(C).
    3. Mateusz Marcinkowski & Dawid Taler & Jan Taler & Katarzyna Węglarz, 2021. "Thermal Calculations of Four-Row Plate-Fin and Tube Heat Exchanger Taking into Account Different Air-Side Correlations on Individual Rows of Tubes for Low Reynold Numbers," Energies, MDPI, vol. 14(21), pages 1-13, October.
    4. Silvia Macchitella & Gianpiero Colangelo & Giuseppe Starace, 2023. "Performance Prediction of Plate-Finned Tube Heat Exchangers for Refrigeration: A Review on Modeling and Optimization Methods," Energies, MDPI, vol. 16(4), pages 1-30, February.
    5. Chang, Hongliang & Han, Zeran & Li, Xionghui & Ma, Ting & Wang, Qiuwang, 2022. "Experimental investigation on heat transfer performance based on average thermal-resistance ratio for supercritical carbon dioxide in asymmetric airfoil-fin printed circuit heat exchanger," Energy, Elsevier, vol. 254(PB).
    6. Mateusz Marcinkowski & Dawid Taler & Jan Taler & Katarzyna Węglarz, 2022. "Air-Side Nusselt Numbers and Friction Factor’s Individual Correlations of Finned Heat Exchangers," Energies, MDPI, vol. 15(15), pages 1-17, August.
    7. Dawid Taler & Jan Taler & Marcin Trojan, 2020. "Experimental Verification of an Analytical Mathematical Model of a Round or Oval Tube Two-Row Car Radiator," Energies, MDPI, vol. 13(13), pages 1-23, July.
    8. Węglarz, Katarzyna & Taler, Dawid & Taler, Jan, 2022. "New non-iterative method for computation of tubular cross-flow heat exchangers," Energy, Elsevier, vol. 260(C).
    9. Seferlis, Panos & Varbanov, Petar Sabev & Papadopoulos, Athanasios I. & Chin, Hon Huin & Klemeš, Jiří Jaromír, 2021. "Sustainable design, integration, and operation for energy high-performance process systems," Energy, Elsevier, vol. 224(C).
    10. Ko, Yun Mo & Song, Joo Young & Lee, Jae Won & Sohn, Sangho & Song, Chan Ho & Khoshvaght-Aliabadi, Morteza & Kim, Yongchan & Kang, Yong Tae, 2024. "A critical review on Colburn j-factor and f-factor and energy performance analysis for finned tube heat exchangers," Energy, Elsevier, vol. 287(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dawid Taler & Jan Taler & Marcin Trojan, 2020. "Experimental Verification of an Analytical Mathematical Model of a Round or Oval Tube Two-Row Car Radiator," Energies, MDPI, vol. 13(13), pages 1-23, July.
    2. Ko, Yun Mo & Song, Joo Young & Lee, Jae Won & Sohn, Sangho & Song, Chan Ho & Khoshvaght-Aliabadi, Morteza & Kim, Yongchan & Kang, Yong Tae, 2024. "A critical review on Colburn j-factor and f-factor and energy performance analysis for finned tube heat exchangers," Energy, Elsevier, vol. 287(C).
    3. Monteiro, Deiglys Borges & de Mello, Paulo Eduardo Batista, 2012. "Thermal performance and pressure drop in a ceramic heat exchanger evaluated using CFD simulations," Energy, Elsevier, vol. 45(1), pages 489-496.
    4. Kundu, Balaram & Barman, Debasis, 2011. "An analytical prediction for performance and optimization of an annular fin assembly of trapezoidal profile under dehumidifying conditions," Energy, Elsevier, vol. 36(5), pages 2572-2588.
    5. Tahseen, Tahseen Ahmad & Ishak, M. & Rahman, M.M., 2015. "An overview on thermal and fluid flow characteristics in a plain plate finned and un-finned tube banks heat exchanger," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 363-380.
    6. Zhang, Pan & Ma, Ting & Li, Wei-Dong & Ma, Guang-Yu & Wang, Qiu-Wang, 2018. "Design and optimization of a novel high temperature heat exchanger for waste heat cascade recovery from exhaust flue gases," Energy, Elsevier, vol. 160(C), pages 3-18.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:203:y:2020:i:c:s0360544220309130. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.