IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i15p3851-d390815.html
   My bibliography  Save this article

Numerical Assessment of Heat Transfer and Entropy Generation of a Porous Metal Heat Sink for Electronic Cooling Applications

Author

Listed:
  • Hamed Rasam

    (Department of Mechanical Engineering, Iran University of Science and Technology, 16844 Tehran, Iran)

  • Prosun Roy

    (Department of Mechanical Engineering, University of Wisconsin-Milwaukee, WI 53211, USA)

  • Laura Savoldi

    (Department of Energy “Galileo Ferraris” (DENERG), Politecnico di Torino, 10129 Turin, Italy)

  • Shabnam Ghahremanian

    (Department of Mechanical Engineering, Amirkabir University of Technology, 1591639675 Tehran, Iran)

Abstract

In the present study, the thermal performance of an electronic equipment cooling system is investigated. The heat sink used in the current cooling system consists of a porous channel with a rectangular cross-section that is assumed to be connected directly to the hot surface of an electronic device. In this modeling, a fully developed flow assumption is used. The Darcy–Brinkman model was used to determine the fluid flow field. Since using the local thermal equilibrium (LTE) model may provide results affected by the error in metal foams, in the present research, an attempt has first been made to examine the validity range of this model. The local thermal non-equilibrium (LTNE) model taking into account the viscous dissipation effect was then used to determine the temperature field. To validate the numerical solution, the computed results were compared with other studies, and an acceptable agreement was observed. Analysis of the temperature field shows that if the fluid–solid-phase thermal conductivity ratio is 1 or the Biot number has a large value, the difference between the temperature of the solid phase and the fluid phase decreases. Moreover, the effect of important hydrodynamic parameters and the porous medium characteristics on the field of hydrodynamic, heat, and entropy generation was studied. Velocity field analysis shows that increasing the pore density and reducing the porosity cause an increase in the shear stress on the walls. By analyzing the entropy generation, it can be found that the irreversibility of heat transfer has a significant contribution to the total irreversibility, leading to a Bejan number close to 1. As a guideline for the design of a porous metal heat sink for electronic equipment, the use of porous media with low porosity reduces the total thermal resistance and improves heat transfer, reducing the total irreversibility and the Bejan number. Moreover, the increasing of pore density increases the specific porous surface; consequently, it reduces the total irreversibility and Bejan number and improves the heat transfer.

Suggested Citation

  • Hamed Rasam & Prosun Roy & Laura Savoldi & Shabnam Ghahremanian, 2020. "Numerical Assessment of Heat Transfer and Entropy Generation of a Porous Metal Heat Sink for Electronic Cooling Applications," Energies, MDPI, vol. 13(15), pages 1-19, July.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:15:p:3851-:d:390815
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/15/3851/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/15/3851/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Torabi, Mohsen & Karimi, Nader & Zhang, Kaili, 2015. "Heat transfer and second law analyses of forced convection in a channel partially filled by porous media and featuring internal heat sources," Energy, Elsevier, vol. 93(P1), pages 106-127.
    2. Torabi, Mohsen & Zhang, Kaili & Yang, Guangcheng & Wang, Jun & Wu, Peng, 2015. "Heat transfer and entropy generation analyses in a channel partially filled with porous media using local thermal non-equilibrium model," Energy, Elsevier, vol. 82(C), pages 922-938.
    3. Sahoo, Santosh Kumar & Das, Mihir Kumar & Rath, Prasenjit, 2016. "Application of TCE-PCM based heat sinks for cooling of electronic components: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 550-582.
    4. Torabi, Mohsen & Zhang, Kaili, 2015. "Temperature distribution, local and total entropy generation analyses in MHD porous channels with thick walls," Energy, Elsevier, vol. 87(C), pages 540-554.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Srinivasacharya, D. & Hima Bindu, K., 2015. "Entropy generation in a micropolar fluid flow through an inclined channel with slip and convective boundary conditions," Energy, Elsevier, vol. 91(C), pages 72-83.
    2. Torabi, Mohsen & Karimi, Nader & Zhang, Kaili, 2015. "Heat transfer and second law analyses of forced convection in a channel partially filled by porous media and featuring internal heat sources," Energy, Elsevier, vol. 93(P1), pages 106-127.
    3. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    4. Yu, De-Hai & He, Zhi-Zhu, 2019. "Shape-remodeled macrocapsule of phase change materials for thermal energy storage and thermal management," Applied Energy, Elsevier, vol. 247(C), pages 503-516.
    5. He, Junjie & Chu, Wenxiao & Wang, Qiuwang, 2025. "Applications of low melting point alloy for electronic thermal management: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 210(C).
    6. Ghadim, H. Benisi & Godin, A. & Veillere, A. & Duquesne, M. & Haillot, D., 2025. "Review of thermal management of electronics and phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 208(C).
    7. Srinivasacharya, D. & Bindu, K. Hima, 2016. "Entropy generation in a porous annulus due to micropolar fluid flow with slip and convective boundary conditions," Energy, Elsevier, vol. 111(C), pages 165-177.
    8. Mohammad Ghalambaz & Seyed Abdollah Mansouri Mehryan & Masoud Mozaffari & Obai Younis & Aritra Ghosh, 2021. "The Effect of Variable-Length Fins and Different High Thermal Conductivity Nanoparticles in the Performance of the Energy Storage Unit Containing Bio-Based Phase Change Substance," Sustainability, MDPI, vol. 13(5), pages 1-22, March.
    9. Gulfam, Raza & Zhang, Peng & Meng, Zhaonan, 2019. "Advanced thermal systems driven by paraffin-based phase change materials – A review," Applied Energy, Elsevier, vol. 238(C), pages 582-611.
    10. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    11. Wang, Jian & Kong, Hui & Xu, Yaobin & Wu, Jinsong, 2019. "Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling," Applied Energy, Elsevier, vol. 241(C), pages 433-443.
    12. Zhang, Xuan & Yu, Cheng & Zhang, Chengbin, 2025. "Advances in latent heat storage technology for electronic cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 215(C).
    13. Zhang, Hongyun & Wang, Lingling & Xi, Shaobo & Xie, Huaqing & Yu, Wei, 2021. "3D porous copper foam-based shape-stabilized composite phase change materials for high photothermal conversion, thermal conductivity and storage," Renewable Energy, Elsevier, vol. 175(C), pages 307-317.
    14. Safari, Vahid & Kamkari, Babak & Hooman, Kamel & Khodadadi, J.M., 2022. "Sensitivity analysis of design parameters for melting process of lauric acid in the vertically and horizontally oriented rectangular thermal storage units," Energy, Elsevier, vol. 255(C).
    15. Sharma, S. & Micheli, L. & Chang, W. & Tahir, A.A. & Reddy, K.S. & Mallick, T.K., 2017. "Nano-enhanced Phase Change Material for thermal management of BICPV," Applied Energy, Elsevier, vol. 208(C), pages 719-733.
    16. Li, Haowen & Yang, Huachao & Yan, Jianhua & Cen, Kefa & Ostrikov, Kostya (Ken) & Bo, Zheng, 2022. "Energy and entropy generation analysis in a supercapacitor for different operating conditions," Energy, Elsevier, vol. 260(C).
    17. Nadezhda S. Bondareva & Mohammad Ghalambaz & Mikhail A. Sheremet, 2021. "Influence of the Fin Shape on Heat Transport in Phase Change Material Heat Sink with Constant Heat Loads," Energies, MDPI, vol. 14(5), pages 1-15, March.
    18. Shao, Xue-Feng & Yang, Sheng & Wang, Chao & Yang, Yong-Jian & Wang, Wu-Jun & Zeng, Yi & Fan, Li-Wu, 2019. "Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature thermal energy storage. (Ⅱ): Isothermal melting and crystallization behaviors," Energy, Elsevier, vol. 180(C), pages 572-583.
    19. Wang, Jin & Li, Yanxin & Zheng, Dan & Mikulčić, Hrvoje & Vujanović, Milan & Sundén, Bengt, 2021. "Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    20. Hu, Xusheng & Chen, Pengyun & Zhang, Xiaoxia & Gong, Xiaolu & Shuai, Yufeng & Wang, Yupeng & Xing, Xiaodong & Zheng, Xin & Wang, Guantong, 2024. "Experimental and numerical study on thermal management performance of PCM-based heat sinks with various configurations fabricated by additive manufacturing," Renewable Energy, Elsevier, vol. 232(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:15:p:3851-:d:390815. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.