IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i14p2646-d247204.html
   My bibliography  Save this article

Experimental and Numerical Investigations on Heat Transfer of Bare Tubes in a Bubbling Fluidized Bed with Respect to Better Heat Integration in Temperature Swing Adsorption Systems

Author

Listed:
  • Hannes Vogtenhuber

    (Technische Universität Wien, Institute for Energy Systems and Thermodynamics, Getreidemarkt 9/BA, 1060 Wien, Austria)

  • Dominik Pernsteiner

    (Technische Universität Wien, Institute for Energy Systems and Thermodynamics, Getreidemarkt 9/BA, 1060 Wien, Austria)

  • René Hofmann

    (Technische Universität Wien, Institute for Energy Systems and Thermodynamics, Getreidemarkt 9/BA, 1060 Wien, Austria
    AIT Austrian Institute of Technology GmbH, Center for Energy, Sustainable Thermal Energy Systems, Giefinggasse 2, 1210 Wien, Austria)

Abstract

In this paper experimental and numerical investigations on heat transfer within a bubbling fluidized bed will be presented with respect to better heat integration in continuous temperature swing adsorption (TSA) processes for biogas upgrading. In the literature, mainly heat transfer measurements with glass or sand particles are carried out, thus special reference measurements with adsorbent material in a fluidized bed are missing. Therefore firstly, a series of experiments were carried out in the fluidized bed test facility to obtain heat transfer coefficients between tube surface and bed which were then compared to calculated heat transfer coefficients to determine whether suitable models were available. Horizontal bare tubes with different arrangements (i.e., single tubes and especially tube bundles) are immersed in fluidized amine layered particles with a mean diameter of 650 μ m which are used in the adsorption industry as adsorbent. The test facility enables a cross-current flow of the solids and gas phase as it prevails in a multi-stage fluidized bed reactor for TSA-applications. The heat transfer measurements with different arrangements and adsorbent material show very similar values in the range of 200 W/m 2 K. The mathematical model for single tubes multiplied by a tube diameter factor shows approximate agreement with the experimental results. However, the mathematical models for tube bundles were not able to predict the measured heat transfer coefficients with the required accuracy. Secondly, a computer fluid dynamics (CFD) program was used to perform a numerical investigation of the test facility using the Euler–Euler method in order to describe the required two-phase characteristic of a fluidized bed. The results of the numerical simulation were compared and validated with the experimental results. Bubbling fluidized bed flow regimes could be reproduced well but the heat transfer coefficients between tube and bed were clearly underestimated. However, a numerical study for a bubbling fluidized bed with external circulation, as used in novel continuous TSA systems, could be carried out and thus a tool for better heat integration measures was developed.

Suggested Citation

  • Hannes Vogtenhuber & Dominik Pernsteiner & René Hofmann, 2019. "Experimental and Numerical Investigations on Heat Transfer of Bare Tubes in a Bubbling Fluidized Bed with Respect to Better Heat Integration in Temperature Swing Adsorption Systems," Energies, MDPI, vol. 12(14), pages 1-26, July.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:14:p:2646-:d:247204
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/14/2646/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/14/2646/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Giorgia Mondino & Carlos A. Grande & Richard Blom, 2017. "Effect of Gas Recycling on the Performance of a Moving Bed Temperature-Swing (MBTSA) Process for CO 2 Capture in a Coal Fired Power Plant Context," Energies, MDPI, vol. 10(6), pages 1-18, May.
    2. Vogtenhuber, H. & Hofmann, R. & Helminger, F. & Schöny, G., 2018. "Process simulation of an efficient temperature swing adsorption concept for biogas upgrading," Energy, Elsevier, vol. 162(C), pages 200-209.
    3. Blaszczuk, Artur & Pogorzelec, Michal & Shimizu, Tadaaki, 2018. "Heat transfer characteristics in a large-scale bubbling fluidized bed with immersed horizontal tube bundles," Energy, Elsevier, vol. 162(C), pages 10-19.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xing Tian & Jian Yang & Zhigang Guo & Qiuwang Wang & Bengt Sunden, 2020. "Numerical Study of Heat Transfer in Gravity-Driven Particle Flow around Tubes with Different Shapes," Energies, MDPI, vol. 13(8), pages 1-15, April.
    2. Xing Tian & Jian Yang & Zhigang Guo & Qiuwang Wang, 2021. "Numerical Investigation of Gravity-Driven Granular Flow around the Vertical Plate: Effect of Pin-Fin and Oscillation on the Heat Transfer," Energies, MDPI, vol. 14(8), pages 1-14, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jin Yan & Xiaofeng Lu & Changfei Zhang & Qianjun Li & Jinping Wang & Shirong Liu & Xiong Zheng & Xuchen Fan, 2021. "An Experimental Study on the Characteristics of NO x Distributions at the SNCR Inlets of a Large-Scale CFB Boiler," Energies, MDPI, vol. 14(5), pages 1-15, February.
    2. Artur Blaszczuk & Szymon Jagodzik, 2021. "Investigation of Heat Transfer in a Large-Scale External Heat Exchanger with Horizontal Smooth Tube Bundle," Energies, MDPI, vol. 14(17), pages 1-24, September.
    3. Baena-Moreno, Francisco M. & Rodríguez-Galán, Mónica & Vega, Fernando & Reina, T.R. & Vilches, Luis F. & Navarrete, Benito, 2019. "Converting CO2 from biogas and MgCl2 residues into valuable magnesium carbonate: A novel strategy for renewable energy production," Energy, Elsevier, vol. 180(C), pages 457-464.
    4. Li, Dongfang & Qu, Xiaoxiao & Li, Junjie & Hong, Suck Won & Jeon, Chung-hwan, 2022. "Microstructural development of product layer during limestone sulfation and its relationship to agglomeration in large-scale CFB boiler," Energy, Elsevier, vol. 238(PC).
    5. Li, Shuangjun & Yuan, Xiangzhou & Deng, Shuai & Zhao, Li & Lee, Ki Bong, 2021. "A review on biomass-derived CO2 adsorption capture: Adsorbent, adsorber, adsorption, and advice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    6. Madejski, Paweł & Taler, Dawid & Taler, Jan, 2022. "Thermal and flow calculations of platen superheater in large scale CFB boiler," Energy, Elsevier, vol. 258(C).
    7. Skjervold, Vidar T. & Mondino, Giorgia & Riboldi, Luca & Nord, Lars O., 2023. "Investigation of control strategies for adsorption-based CO2 capture from a thermal power plant under variable load operation," Energy, Elsevier, vol. 268(C).
    8. Moon, Ji-Hong & Jo, Sung-Ho & Park, Sung Jin & Khoi, Nguyen Hoang & Seo, Myung Won & Ra, Ho Won & Yoon, Sang-Jun & Yoon, Sung-Min & Lee, Jae-Goo & Mun, Tae-Young, 2019. "Carbon dioxide purity and combustion characteristics of oxy firing compared to air firing in a pilot-scale circulating fluidized bed," Energy, Elsevier, vol. 166(C), pages 183-192.
    9. Yan, Jin & Lu, Xiaofeng & Song, Yangfan & Zheng, Xiong & Lei, Xiujian & Liu, Zhuo & Fan, Xuchen & Liu, Congcong, 2021. "A comprehensive understanding of the non-uniform characteristics and regulation mechanism of six external loops in a 600 MW supercritical CFB boiler," Energy, Elsevier, vol. 222(C).
    10. Li, Dongfang & Kim, Kyeongho & Kim, Minwoo & Zeng, Yijie & Yang, Zhongzhi & Lee, Sangho & Lu, Xiaofeng & Jeon, Chung-Hwan, 2021. "Effects of particle size on bed-to-surface heat transfer in bubbling fluidized bed heat exchangers of 550 MWe ultra-supercritical CFB boiler," Energy, Elsevier, vol. 222(C).
    11. Li, Dongfang & Ke, Xiwei & Zhang, Man & Yang, Hairui & Jung, Sungmook & Ahn, Seokgi & Jeon, Chung-Hwan, 2020. "A comprehensive mass balance model of a 550 MWe ultra-supercritical CFB boiler with internal circulation," Energy, Elsevier, vol. 206(C).
    12. Nam, Hyungseok & Kim, Jung Hwan & Kim, Hana & Kim, Min Jae & Jeon, Sang-Goo & Jin, Gyoung-Tae & Won, Yooseob & Hwang, Byung Wook & Lee, Seung-Yong & Baek, Jeom-In & Lee, Doyeon & Seo, Myung Won & Ryu,, 2021. "CO2 methanation in a bench-scale bubbling fluidized bed reactor using Ni-based catalyst and its exothermic heat transfer analysis," Energy, Elsevier, vol. 214(C).
    13. Kai Lei & Buqing Ye & Jin Cao & Rui Zhang & Dong Liu, 2017. "Combustion Characteristics of Single Particles from Bituminous Coal and Pine Sawdust in O 2 /N 2 , O 2 /CO 2 , and O 2 /H 2 O Atmospheres," Energies, MDPI, vol. 10(11), pages 1-12, October.
    14. Bedoić, Robert & Jurić, Filip & Ćosić, Boris & Pukšec, Tomislav & Čuček, Lidija & Duić, Neven, 2020. "Beyond energy crops and subsidised electricity – A study on sustainable biogas production and utilisation in advanced energy markets," Energy, Elsevier, vol. 201(C).
    15. Khoshnevisan, Benyamin & He, Li & Xu, Mingyi & Valverde-Pérez, Borja & Sillman, Jani & Mitraka, Georgia-Christina & Kougias, Panagiotis G. & Zhang, Yifeng & Yan, Shuiping & Ji, Long & Carbajales-Dale,, 2022. "From renewable energy to sustainable protein sources: Advancement, challenges, and future roadmaps," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    16. Li, Dongfang & Cai, Runxia & Zhang, Man & Yang, Hairui & Choi, Kyeong & Ahn, Seokgi & Jeon, Chung-Hwan, 2020. "Operation characteristics of a bubbling fluidized bed heat exchanger with internal solid circulation for a 550-MWe ultra-supercritical CFB boiler," Energy, Elsevier, vol. 192(C).
    17. Ocanha, Enzo Schlottfeldt & Zinani, Flávia Schwarz Franceschini & Modolo, Regina Celia Espinosa & Santos, Fernando Almeida, 2020. "Assesment of the effects of chemical and physical parameters in the fluidization of biomass and sand binary mixtures through statistical analysis," Energy, Elsevier, vol. 190(C).
    18. Judt, W. & Ciupek, B. & Urbaniak, R., 2020. "Numerical study of a heat transfer process in a low power heating boiler equipped with afterburning chamber," Energy, Elsevier, vol. 196(C).
    19. Nam, Hyungseok & Won, Yooseob & Kim, Jae-Young & Yi, Chang-Keun & Park, Young Cheol & Woo, Jae Min & Jung, Su-Yeong & Jin, Gyoung-Tae & Jo, Sung-Ho & Lee, Seung-Yong & Kim, Hyunuk & Park, Jaehyeon, 2020. "Hydrodynamics and heat transfer coefficients during CO2 carbonation reaction in a circulated fluidized bed reactor using 200 kg potassium-based dry sorbent," Energy, Elsevier, vol. 193(C).
    20. Miao, Miao & Deng, Boyu & Kong, Hao & Yang, Hairui & Lyu, Junfu & Jiang, Xiaoguo & Zhang, Man, 2021. "Effects of volatile matter and oxygen concentration on combustion characteristics of coal in an oxygen-enriched fluidized bed," Energy, Elsevier, vol. 220(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:14:p:2646-:d:247204. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.