IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v74y2017icp569-580.html
   My bibliography  Save this article

Indoor thermal comfort predictions: Selected issues and trends

Author

Listed:
  • Djamila, Harimi

Abstract

Thermal comfort is a complex topic and the methods studied so far are only approximate. Many investigators are likely to face some of the issues addressed in this article. The focus of the review is on selected issues and trends relevant to thermal comfort. Meta-analysis was performed using the ASHRAE RPA-884 database. The aim is to address some of the methodological issues of preliminary data analysis and predictions of comfort temperatures. An examination of how to assess the age factor for thermal comfort consideration in the ASHRAE database was also conducted by using an explicit transparent methodology. A new procedure was developed for predicting and analysing comfort temperature. The suggested procedure goes beyond the obvious need for more research studies to underscore deficiencies in data collection, which will lead to better data analysis. Editors might use the results and recommendations from this investigation before publishing original research on thermal comfort.

Suggested Citation

  • Djamila, Harimi, 2017. "Indoor thermal comfort predictions: Selected issues and trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 569-580.
    • Handle: RePEc:eee:rensus:v:74:y:2017:i:c:p:569-580
    DOI: 10.1016/j.rser.2017.02.076
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S136403211730299X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2017.02.076?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Djongyang, Noël & Tchinda, René & Njomo, Donatien, 2010. "Thermal comfort: A review paper," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2626-2640, December.
    2. Taleghani, Mohammad & Tenpierik, Martin & Kurvers, Stanley & van den Dobbelsteen, Andy, 2013. "A review into thermal comfort in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 201-215.
    3. Nava Subramaniam & Jenny Stewart & Chew Ng & Art Shulman, 2013. "Understanding corporate governance in the Australian public sector," Accounting, Auditing & Accountability Journal, Emerald Group Publishing Limited, vol. 26(6), pages 946-977, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tomasz Szul & Stanisław Kokoszka, 2020. "Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization," Energies, MDPI, vol. 13(6), pages 1-17, March.
    2. Sakiyama, N.R.M. & Carlo, J.C. & Frick, J. & Garrecht, H., 2020. "Perspectives of naturally ventilated buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 130(C).
    3. Schieweck, Alexandra & Uhde, Erik & Salthammer, Tunga & Salthammer, Lea C. & Morawska, Lidia & Mazaheri, Mandana & Kumar, Prashant, 2018. "Smart homes and the control of indoor air quality," Renewable and Sustainable Energy Reviews, Elsevier, vol. 94(C), pages 705-718.
    4. Fabiana Silvero & Fernanda Rodrigues & Sergio Montelpare, 2019. "A Parametric Study and Performance Evaluation of Energy Retrofit Solutions for Buildings Located in the Hot-Humid Climate of Paraguay—Sensitivity Analysis," Energies, MDPI, vol. 12(3), pages 1-27, January.
    5. Kristian Fabbri & Jacopo Gaspari & Laura Vandi, 2019. "Indoor Thermal Comfort of Pregnant Women in Hospital: A Case Study Evidence," Sustainability, MDPI, vol. 11(23), pages 1-24, November.
    6. Huang, Baofeng & Wang, Yeqing & Lu, Wensheng & Cheng, Meng, 2022. "Fabrication and energy efficiency of translucent concrete panel for building envelope," Energy, Elsevier, vol. 248(C).
    7. Tomasz Szul & Krzysztof Nęcka & Thomas G. Mathia, 2020. "Neural Methods Comparison for Prediction of Heating Energy Based on Few Hundreds Enhanced Buildings in Four Season’s Climate," Energies, MDPI, vol. 13(20), pages 1-17, October.
    8. Becerra, Miguel & Jerez, Alejandro & Valenzuela, Miguel & Garcés, Hugo O. & Demarco, Rodrigo, 2018. "Life quality disparity: Analysis of indoor comfort gaps for Chilean households," Energy Policy, Elsevier, vol. 121(C), pages 190-201.
    9. Zhang, Sheng & Cheng, Yong & Fang, Zhaosong & Huan, Chao & Lin, Zhang, 2017. "Optimization of room air temperature in stratum-ventilated rooms for both thermal comfort and energy saving," Applied Energy, Elsevier, vol. 204(C), pages 420-431.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ribeiro, Thatiana Jessica da Silva & Mady, Carlos Eduardo Keutenedjian, 2022. "Comparison among exergy analysis methods applied to a human body thermal model," Energy, Elsevier, vol. 239(PE).
    2. Van Craenendonck, Stijn & Lauriks, Leen & Vuye, Cedric & Kampen, Jarl, 2018. "A review of human thermal comfort experiments in controlled and semi-controlled environments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3365-3378.
    3. Enescu, Diana, 2017. "A review of thermal comfort models and indicators for indoor environments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1353-1379.
    4. Azar, Elie & Nikolopoulou, Christina & Papadopoulos, Sokratis, 2016. "Integrating and optimizing metrics of sustainable building performance using human-focused agent-based modeling," Applied Energy, Elsevier, vol. 183(C), pages 926-937.
    5. Croitoru, Cristiana & Nastase, Ilinca & Bode, Florin & Meslem, Amina & Dogeanu, Angel, 2015. "Thermal comfort models for indoor spaces and vehicles—Current capabilities and future perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 44(C), pages 304-318.
    6. Michał Piasecki & Małgorzata Fedorczak-Cisak & Marcin Furtak & Jacek Biskupski, 2019. "Experimental Confirmation of the Reliability of Fanger’s Thermal Comfort Model—Case Study of a Near-Zero Energy Building (NZEB) Office Building," Sustainability, MDPI, vol. 11(9), pages 1-25, April.
    7. Paulína Šujanová & Monika Rychtáriková & Tiago Sotto Mayor & Affan Hyder, 2019. "A Healthy, Energy-Efficient and Comfortable Indoor Environment, a Review," Energies, MDPI, vol. 12(8), pages 1-37, April.
    8. Ajabli, Houda & Zoubir, Amine & Elotmani, Rabie & Louzazni, Mohamed & Kandoussi, Khalid & Daya, Abdelmajid, 2023. "Review on Eco-friendly insulation material used for indoor comfort in building," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    9. Yang, Liu & Yan, Haiyan & Lam, Joseph C., 2014. "Thermal comfort and building energy consumption implications – A review," Applied Energy, Elsevier, vol. 115(C), pages 164-173.
    10. Claudia Valderrama-Ulloa & Lorena Silva-Castillo & Catalina Sandoval-Grandi & Carlos Robles-Calderon & Fabien Rouault, 2020. "Indoor Environmental Quality in Latin American Buildings: A Systematic Literature Review," Sustainability, MDPI, vol. 12(2), pages 1-19, January.
    11. Charani Shandiz, Saeid & Rismanchi, Behzad & Foliente, Greg, 2021. "Energy master planning for net-zero emission communities: State of the art and research challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    12. Laura J. Elstub & Shimra J. Fine & Karl E. Zelik, 2021. "Exoskeletons and Exosuits Could Benefit from Mode-Switching Body Interfaces That Loosen/Tighten to Improve Thermal Comfort," IJERPH, MDPI, vol. 18(24), pages 1-12, December.
    13. Md. Mahmudul Alam & Jamaliah Said & Mohamad Azizal Abd Aziz, 2018. "Role of integrity system, internal control system and leadership practices on the accountability practices in the public sectors of Malaysia," Social Responsibility Journal, Emerald Group Publishing Limited, vol. 15(7), pages 955-976, December.
    14. Taleghani, Mohammad, 2018. "Outdoor thermal comfort by different heat mitigation strategies- A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 2011-2018.
    15. Bruno Malet-Damour & Jean-Pierre Habas & Dimitri Bigot, 2023. "Is Loose-Fill Plastic Waste an Opportunity for Thermal Insulation in Cold and Humid Tropical Climates?," Sustainability, MDPI, vol. 15(12), pages 1-19, June.
    16. Francesco Asdrubali & Cinzia Buratti & Franco Cotana & Giorgio Baldinelli & Michele Goretti & Elisa Moretti & Catia Baldassarri & Elisa Belloni & Francesco Bianchi & Antonella Rotili & Marco Vergoni &, 2013. "Evaluation of Green Buildings’ Overall Performance through in Situ Monitoring and Simulations," Energies, MDPI, vol. 6(12), pages 1-23, December.
    17. Wang, Nan & Wang, Julian & Feng, Yanxiao, 2022. "Systematic review: Acute thermal effects of artificial light in the daytime," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    18. Amir Faraji & Maria Rashidi & Fatemeh Rezaei & Payam Rahnamayiezekavat, 2023. "A Meta-Synthesis Review of Occupant Comfort Assessment in Buildings (2002–2022)," Sustainability, MDPI, vol. 15(5), pages 1-36, February.
    19. Burillo, Daniel & Chester, Mikhail V. & Pincetl, Stephanie & Fournier, Eric, 2019. "Electricity infrastructure vulnerabilities due to long-term growth and extreme heat from climate change in Los Angeles County," Energy Policy, Elsevier, vol. 128(C), pages 943-953.
    20. Buratti, C. & Palladino, D. & Ricciardi, P., 2016. "Application of a new 13-value thermal comfort scale to moderate environments," Applied Energy, Elsevier, vol. 180(C), pages 859-866.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:74:y:2017:i:c:p:569-580. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.