IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v145y2021ics1364032121001544.html
   My bibliography  Save this article

A critical review on surface-pattern engineering of nafion membrane for fuel cell applications

Author

Listed:
  • Ke, Yuzhi
  • Yuan, Wei
  • Zhou, Feikun
  • Guo, Wenwen
  • Li, Jinguang
  • Zhuang, Ziyi
  • Su, Xiaoqing
  • Lu, Biaowu
  • Zhao, Yonghao
  • Tang, Yong
  • Chen, Yu
  • Song, Jianli

Abstract

Surface-pattern engineering, as a key strategy to fabricate high-performance Nafion membranes for fuel cells, plays an important role in surface functionalization of the membrane, optimization of the three-phase boundary, water management, proton transport, etc. Considerable efforts have been dedicated to developing advanced-patterned Nafion membranes with single-scale (nanoscale or microscale) and multiscale-patterned structures which are believed to improve the performance of membrane electrode assemblies (MEAs) for fuel cells. In this review, the recent progress in surface-patterned Nafion membranes (SPNMs) equipped with single-scale-patterned structures (including nanostructured and microstructured Nafion membranes) is firstly highlighted. The structural features and construction methods of SPNMs are discussed in detail. The effects of single-scale SPNMs on the construction and performance of fuel cells are also analyzed. Followed is an overview of the recent advances in fabricating multiscale SPNMs based on different strategies with a specific introduction on the membrane related effects on fuel cells. Finally, the future development direction and certain perspectives on the current issues of SPNMs are presented.

Suggested Citation

  • Ke, Yuzhi & Yuan, Wei & Zhou, Feikun & Guo, Wenwen & Li, Jinguang & Zhuang, Ziyi & Su, Xiaoqing & Lu, Biaowu & Zhao, Yonghao & Tang, Yong & Chen, Yu & Song, Jianli, 2021. "A critical review on surface-pattern engineering of nafion membrane for fuel cell applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    • Handle: RePEc:eee:rensus:v:145:y:2021:i:c:s1364032121001544
    DOI: 10.1016/j.rser.2021.110860
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032121001544
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2021.110860?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Priya, K. & Sathishkumar, K. & Rajasekar, N., 2018. "A comprehensive review on parameter estimation techniques for Proton Exchange Membrane fuel cell modelling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 121-144.
    2. Xin Liu & Yi Li & Jiandang Xue & Weikang Zhu & Junfeng Zhang & Yan Yin & Yanzhou Qin & Kui Jiao & Qing Du & Bowen Cheng & Xupin Zhuang & Jianxin Li & Michael D. Guiver, 2019. "Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane," Nature Communications, Nature, vol. 10(1), pages 1-13, December.
    3. Qiu, Diankai & Peng, Linfa & Lai, Xinmin & Ni, Meng & Lehnert, Werner, 2019. "Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    4. An, L. & Zhao, T.S. & Li, Y.S., 2015. "Carbon-neutral sustainable energy technology: Direct ethanol fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 1462-1468.
    5. Trevor J. Ponman & Damian B. Cannon & Julio F. Navarro, 1999. "The thermal imprint of galaxy formation on X-ray clusters," Nature, Nature, vol. 397(6715), pages 135-137, January.
    6. Liu, Hao & Chen, Jian & Hissel, Daniel & Lu, Jianguo & Hou, Ming & Shao, Zhigang, 2020. "Prognostics methods and degradation indexes of proton exchange membrane fuel cells: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 123(C).
    7. Le Shi & Ao Xu & Ding Pan & Tianshou Zhao, 2019. "Aqueous proton-selective conduction across two-dimensional graphyne," Nature Communications, Nature, vol. 10(1), pages 1-8, December.
    8. Wu, Q.X. & Zhao, T.S. & Chen, R. & An, L., 2013. "A sandwich structured membrane for direct methanol fuel cells operating with neat methanol," Applied Energy, Elsevier, vol. 106(C), pages 301-306.
    9. Hyesung Cho & Junsoo Kim & Hyunchul Park & Jung Won Bang & Moon Seop Hyun & Yongjun Bae & Laura Ha & Do Yoon Kim & Seong Min Kang & Tae Jung Park & Soonmin Seo & Mansoo Choi & Kahp-Yang Suh, 2014. "Replication of flexible polymer membranes with geometry-controllable nano-apertures via a hierarchical mould-based dewetting," Nature Communications, Nature, vol. 5(1), pages 1-10, May.
    10. Zhou, Jing & Cao, Jiamu & Zhang, Yufeng & Liu, Junfeng & Chen, Junyu & Li, Mingxue & Wang, Weiqi & Liu, Xiaowei, 2021. "Overcoming undesired fuel crossover: Goals of methanol-resistant modification of polymer electrolyte membranes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    11. Zakil, F. Ahmad & Kamarudin, S.K. & Basri, S., 2016. "Modified Nafion membranes for direct alcohol fuel cells: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 841-852.
    12. Weiqing Zheng & Liang Wang & Fei Deng & Stephen A. Giles & Ajay K. Prasad & Suresh G. Advani & Yushan Yan & Dionisios G. Vlachos, 2017. "Durable and self-hydrating tungsten carbide-based composite polymer electrolyte membrane fuel cells," Nature Communications, Nature, vol. 8(1), pages 1-8, December.
    13. Yongmei Zheng & Hao Bai & Zhongbing Huang & Xuelin Tian & Fu-Qiang Nie & Yong Zhao & Jin Zhai & Lei Jiang, 2010. "Directional water collection on wetted spider silk," Nature, Nature, vol. 463(7281), pages 640-643, February.
    14. Sharaf, Omar Z. & Orhan, Mehmet F., 2014. "An overview of fuel cell technology: Fundamentals and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 810-853.
    15. Ma, Jia & Choudhury, Nurul A. & Sahai, Yogeshwar, 2010. "A comprehensive review of direct borohydride fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 183-199, January.
    16. Wilberforce, Tabbi & El Hassan, Zaki & Ogungbemi, Emmanuel & Ijaodola, O. & Khatib, F.N. & Durrant, A. & Thompson, J. & Baroutaji, A. & Olabi, A.G., 2019. "A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 236-260.
    17. John T. S. Irvine & Dragos Neagu & Maarten C. Verbraeken & Christodoulos Chatzichristodoulou & Christopher Graves & Mogens B. Mogensen, 2016. "Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers," Nature Energy, Nature, vol. 1(1), pages 1-13, January.
    18. Parthiban Velayutham & Akhila K. Sahu & Sridhar Parthasarathy, 2017. "A Nafion-Ceria Composite Membrane Electrolyte for Reduced Methanol Crossover in Direct Methanol Fuel Cells," Energies, MDPI, vol. 10(2), pages 1-13, February.
    19. Longfei Xue & Yongcheng Li & Xiaofang Liu & Qingtao Liu & Jiaxiang Shang & Huiping Duan & Liming Dai & Jianglan Shui, 2018. "Zigzag carbon as efficient and stable oxygen reduction electrocatalyst for proton exchange membrane fuel cells," Nature Communications, Nature, vol. 9(1), pages 1-8, December.
    20. Munjewar, Seema S. & Thombre, Shashikant B. & Mallick, Ranjan K., 2017. "Approaches to overcome the barrier issues of passive direct methanol fuel cell – Review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1087-1104.
    21. Wang, Luwen & Yuan, Zhaoxia & Wen, Fei & Cheng, Yuhua & Zhang, Yufeng & Wang, Gaofeng, 2018. "A bipolar passive DMFC stack for portable applications," Energy, Elsevier, vol. 144(C), pages 587-593.
    22. Li, Jing & Xu, Guoxiao & Luo, Xingying & Xiong, Jie & Liu, Zhao & Cai, Weiwei, 2018. "Effect of nano-size of functionalized silica on overall performance of swelling-filling modified Nafion membrane for direct methanol fuel cell application," Applied Energy, Elsevier, vol. 213(C), pages 408-414.
    23. M. Lopez-Haro & L. Guétaz & T. Printemps & A. Morin & S. Escribano & P.-H. Jouneau & P. Bayle-Guillemaud & F. Chandezon & G. Gebel, 2014. "Three-dimensional analysis of Nafion layers in fuel cell electrodes," Nature Communications, Nature, vol. 5(1), pages 1-6, December.
    24. Hyesung Cho & Sang Moon Kim & Yun Sik Kang & Junsoo Kim & Segeun Jang & Minhyoung Kim & Hyunchul Park & Jung Won Bang & Soonmin Seo & Kahp-Yang Suh & Yung-Eun Sung & Mansoo Choi, 2015. "Multiplex lithography for multilevel multiscale architectures and its application to polymer electrolyte membrane fuel cell," Nature Communications, Nature, vol. 6(1), pages 1-8, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abdul Ghani Olabi & Tabbi Wilberforce & Abdulrahman Alanazi & Parag Vichare & Enas Taha Sayed & Hussein M. Maghrabie & Khaled Elsaid & Mohammad Ali Abdelkareem, 2022. "Novel Trends in Proton Exchange Membrane Fuel Cells," Energies, MDPI, vol. 15(14), pages 1-35, July.
    2. Teixeira, Fátima C. & Teixeira, António P.S. & Rangel, C.M., 2022. "New proton conductive membranes of indazole- and condensed pyrazolebisphosphonic acid-Nafion membranes for PEMFC," Renewable Energy, Elsevier, vol. 196(C), pages 1187-1196.
    3. Ke, Yuzhi & Zhang, Baotong & Bai, Yafeng & Yuan, Wei & Li, Jinguang & Liu, Ziang & Su, Xiaoqing & Zhang, Shiwei & Ding, Xinrui & Wan, Zhenping & Tang, Yong & Zhou, Feikun, 2023. "Bubble-derived contour regeneration of flow channel by in situ tracking for direct methanol fuel cells," Energy, Elsevier, vol. 264(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhou, Jing & Cao, Jiamu & Zhang, Yufeng & Liu, Junfeng & Chen, Junyu & Li, Mingxue & Wang, Weiqi & Liu, Xiaowei, 2021. "Overcoming undesired fuel crossover: Goals of methanol-resistant modification of polymer electrolyte membranes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    2. Zhang, Rongji & Cao, Jiamu & Wang, Weiqi & Zhou, Jing & Chen, Junyu & Chen, Liang & Chen, Weiping & Zhang, Yufeng, 2023. "An improved strategy of passive micro direct methanol fuel cell: Mass transport mechanism optimization dominated by a single hydrophilic layer," Energy, Elsevier, vol. 274(C).
    3. Song, Ke & Wang, Yimin & Ding, Yuhang & Xu, Hongjie & Mueller-Welt, Philip & Stuermlinger, Tobias & Bause, Katharina & Ehrmann, Christopher & Weinmann, Hannes W. & Schaefer, Jens & Fleischer, Juergen , 2022. "Assembly techniques for proton exchange membrane fuel cell stack: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    4. Ahmed Mohmed Dafalla & Lin Wei & Bereket Tsegai Habte & Jian Guo & Fangming Jiang, 2022. "Membrane Electrode Assembly Degradation Modeling of Proton Exchange Membrane Fuel Cells: A Review," Energies, MDPI, vol. 15(23), pages 1-26, December.
    5. Ćalasan, Martin & Abdel Aleem, Shady H.E. & Hasanien, Hany M. & Alaas, Zuhair M. & Ali, Ziad M., 2023. "An innovative approach for mathematical modeling and parameter estimation of PEM fuel cells based on iterative Lambert W function," Energy, Elsevier, vol. 264(C).
    6. Ángel Encalada-Dávila & Samir Echeverría & Jordy Santana-Villamar & Gabriel Cedeño & Mayken Espinoza-Andaluz, 2021. "Optimization Algorithms: Optimal Parameters Computation for Modeling the Polarization Curves of a PEFC Considering the Effect of the Relative Humidity," Energies, MDPI, vol. 14(18), pages 1-21, September.
    7. Bahrami, Milad & Martin, Jean-Philippe & Maranzana, Gaël & Pierfederici, Serge & Weber, Mathieu & Didierjean, Sophie, 2022. "Fuel cell management system: An approach to increase its durability," Applied Energy, Elsevier, vol. 306(PB).
    8. Qiu, Diankai & Peng, Linfa & Yi, Peiyun & Lehnert, Werner & Lai, Xinmin, 2021. "Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    9. Saadat, Nazmus & Dhakal, Hom N. & Tjong, Jimi & Jaffer, Shaffiq & Yang, Weimin & Sain, Mohini, 2021. "Recent advances and future perspectives of carbon materials for fuel cell," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    10. Abdelkareem, Mohammad Ali & Allagui, Anis & Sayed, Enas Taha & El Haj Assad, M. & Said, Zafar & Elsaid, Khaled, 2019. "Comparative analysis of liquid versus vapor-feed passive direct methanol fuel cells," Renewable Energy, Elsevier, vol. 131(C), pages 563-584.
    11. Pan, Zhefei & Bi, Yanding & An, Liang, 2020. "A cost-effective and chemically stable electrode binder for alkaline-acid direct ethylene glycol fuel cells," Applied Energy, Elsevier, vol. 258(C).
    12. An, L. & Jung, C.Y., 2017. "Transport phenomena in direct borohydride fuel cells," Applied Energy, Elsevier, vol. 205(C), pages 1270-1282.
    13. Zhou, Yu & Chen, Ben, 2023. "Investigation of optimization and evaluation criteria for flow field in proton exchange membrane fuel cell: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    14. Guoxiao Xu & Xinwei Dong & Bin Xue & Jianyou Huang & Junli Wu & Weiwei Cai, 2023. "Recent Approaches to Achieve High Temperature Operation of Nafion Membranes," Energies, MDPI, vol. 16(4), pages 1-21, February.
    15. Huu-Linh Nguyen & Sang-Min Lee & Sangseok Yu, 2023. "A Comprehensive Review of Degradation Prediction Methods for an Automotive Proton Exchange Membrane Fuel Cell," Energies, MDPI, vol. 16(12), pages 1-32, June.
    16. Rasaki, S.A. & Liu, C. & Lao, C. & Zhang, H. & Chen, Z., 2021. "The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    17. Zhao, Chen & Li, Baozhu & Zhang, Lu & Han, Yaru & Wu, Xiaoyu, 2023. "Novel optimal structure design and testing of air-cooled open-cathode proton exchange membrane fuel cell," Renewable Energy, Elsevier, vol. 215(C).
    18. Deng, Zhihua & Chan, Siew Hwa & Chen, Qihong & Liu, Hao & Zhang, Liyan & Zhou, Keliang & Tong, Sirui & Fu, Zhichao, 2023. "Efficient degradation prediction of PEMFCs using ELM-AE based on fuzzy extension broad learning system," Applied Energy, Elsevier, vol. 331(C).
    19. Santos, D.M.F. & Sequeira, C.A.C., 2011. "Sodium borohydride as a fuel for the future," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3980-4001.
    20. Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M., 2017. "Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 268-291.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:145:y:2021:i:c:s1364032121001544. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.