IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v35y2010i9p2136-2142.html
   My bibliography  Save this article

Mathematical algorithms to locate factories to transform biomass in bioenergy focused on logistic network construction

Author

Listed:
  • Velazquez-Marti, B.
  • Fernandez-Gonzalez, E.

Abstract

Many linear programming models have been developed to study the logistics and determine the best setup for bioenergy chains. Most use network structures built from nodes with one or more depots and arcs connecting these depots. Each depot is a source of a certain biomass type. Nodes can also represent a biomass storage point or a production facility (e.g., power plant) where the biomass is used. Arcs represent transport routes between depots. To combine GIS spatial studies with linear programming models, it is necessary to design a network from a digital map. In this research a mathematical calculation method is developed to select the actual points on the map for the locations of a bioenergy plant that will then be considered as biomass destinations in a network model. The base data for this model is city's locations and the bioenergy they required, given in GIS maps (shape files), although also it can be the points where the biomass is produced. The limits of the studied area should be defined in advance, for example, a country, a province or a region. Criteria selection for plant location is two: all the energy produced by the plant should be used; the cost to transport the energy produced should be minimal. With these criteria, the cities are grouped in sets, which should be supplied by a power energy plant. Each plant supplying a given subset of cities will be located in the center of gravity specified by the coordinates and the energy required by each city in the subset. The algorithm provides the locations of points where plants that transform biomass into bioenergy for a group of cities are placed. The points to locate plants are then taken as destination nodes in the network when the logistics models are implemented. In the next step, the network is analyzed by linear programming techniques to supply the optimal location for the power plants or factories depending on the available biomass sources. In this paper a practical example applied to Spanish rural regions is discussed.

Suggested Citation

  • Velazquez-Marti, B. & Fernandez-Gonzalez, E., 2010. "Mathematical algorithms to locate factories to transform biomass in bioenergy focused on logistic network construction," Renewable Energy, Elsevier, vol. 35(9), pages 2136-2142.
    • Handle: RePEc:eee:renene:v:35:y:2010:i:9:p:2136-2142
    DOI: 10.1016/j.renene.2010.02.011
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148110000819
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2010.02.011?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Perpiñá, C. & Alfonso, D. & Pérez-Navarro, A. & Peñalvo, E. & Vargas, C. & Cárdenas, R., 2009. "Methodology based on Geographic Information Systems for biomass logistics and transport optimisation," Renewable Energy, Elsevier, vol. 34(3), pages 555-565.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li Chenguang & Hlatká Martina, 2017. "Identification of the Area for Proper Integration of Three Current Storage Objects into One Complex Logistics Point," LOGI – Scientific Journal on Transport and Logistics, Sciendo, vol. 8(1), pages 38-47, May.
    2. Jin Su Jeong, 2018. "Biomass Feedstock and Climate Change in Agroforestry Systems: Participatory Location and Integration Scenario Analysis of Biomass Power Facilities," Energies, MDPI, vol. 11(6), pages 1-16, May.
    3. Mafakheri, Fereshteh & Nasiri, Fuzhan, 2014. "Modeling of biomass-to-energy supply chain operations: Applications, challenges and research directions," Energy Policy, Elsevier, vol. 67(C), pages 116-126.
    4. Lim, Chun Hsion & Lam, Hon Loong & Ng, Wendy Pei Qin, 2018. "A novel HAZOP approach for literature review on biomass supply chain optimisation model," Energy, Elsevier, vol. 146(C), pages 13-25.
    5. Jin Su Jeong & Álvaro Ramírez-Gómez, 2017. "A Multicriteria GIS-Based Assessment to Optimize Biomass Facility Sites with Parallel Environment—A Case Study in Spain," Energies, MDPI, vol. 10(12), pages 1-14, December.
    6. Islam Hassanin & Matjaz Knez, 2022. "Managing Supply Chain Activities in the Field of Energy Production Focusing on Renewables," Sustainability, MDPI, vol. 14(12), pages 1-33, June.
    7. Bojesen, M. & Birkin, M. & Clarke, G., 2014. "Spatial competition for biogas production using insights from retail location models," Energy, Elsevier, vol. 68(C), pages 617-628.
    8. Bekkering, J. & Hengeveld, E.J. & van Gemert, W.J.T. & Broekhuis, A.A., 2015. "Designing a green gas supply to meet regional seasonal demand – An operations research case study," Applied Energy, Elsevier, vol. 143(C), pages 348-358.
    9. Xiang Zhao & Xiaoya Ma & Kun Wang & Yuqing Long & Dongjie Zhang & Zhanchun Xiao, 2017. "A Spatially Explicit Optimization Model for Agricultural Straw-Based Power Plant Site Selection: A Case Study in Hubei Province, China," Sustainability, MDPI, vol. 9(5), pages 1-19, May.
    10. Gaibor-Chávez, J. & Pérez-Pacheco, S. & Velázquez-Martí, B. & Niño-Ruiz, Z. & Domínguez-Narváez, V., 2016. "Dendrometric characterization of corn cane residues and drying models in natural conditions in Bolivar Province (Ecuador)," Renewable Energy, Elsevier, vol. 86(C), pages 745-750.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chopin, Pierre & Guindé, Loïc & Causeret, François & Bergkvist, Göran & Blazy, Jean-Marc, 2019. "Integrating stakeholder preferences into assessment of scenarios for electricity production from locally produced biomass on a small island," Renewable Energy, Elsevier, vol. 131(C), pages 128-136.
    2. Kargbo, Hannah & Harris, Jonathan Stuart & Phan, Anh N., 2021. "“Drop-in” fuel production from biomass: Critical review on techno-economic feasibility and sustainability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    3. Cambero, Claudia & Sowlati, Taraneh, 2014. "Assessment and optimization of forest biomass supply chains from economic, social and environmental perspectives – A review of literature," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 62-73.
    4. Sultana, Arifa & Kumar, Amit, 2012. "Optimal siting and size of bioenergy facilities using geographic information system," Applied Energy, Elsevier, vol. 94(C), pages 192-201.
    5. Angelis-Dimakis, Athanasios & Biberacher, Markus & Dominguez, Javier & Fiorese, Giulia & Gadocha, Sabine & Gnansounou, Edgard & Guariso, Giorgio & Kartalidis, Avraam & Panichelli, Luis & Pinedo, Irene, 2011. "Methods and tools to evaluate the availability of renewable energy sources," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1182-1200, February.
    6. David Alfonso-Solar & Carlos Vargas-Salgado & Carlos Sánchez-Díaz & Elías Hurtado-Pérez, 2020. "Small-Scale Hybrid Photovoltaic-Biomass Systems Feasibility Analysis for Higher Education Buildings," Sustainability, MDPI, vol. 12(21), pages 1-14, November.
    7. Calvert, K. & Pearce, J.M. & Mabee, W.E., 2013. "Toward renewable energy geo-information infrastructures: Applications of GIScience and remote sensing that build institutional capacity," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 416-429.
    8. Gallagher, Cathal & Murphy, Jerry D., 2013. "What is the realistic potential for biomethane produced through gasification of indigenous Willow or imported wood chip to meet renewable energy heat targets?," Applied Energy, Elsevier, vol. 108(C), pages 158-167.
    9. Avinash Bharti & Kunwar Paritosh & Venkata Ravibabu Mandla & Aakash Chawade & Vivekanand Vivekanand, 2021. "GIS Application for the Estimation of Bioenergy Potential from Agriculture Residues: An Overview," Energies, MDPI, vol. 14(4), pages 1-15, February.
    10. Katarina Mostarac & Petar Mostarac & Zvonko Kavran & Dragana Šarac, 2022. "Determining Optimal Locations of Postal Access Points Based on Simulated Annealing," Sustainability, MDPI, vol. 14(14), pages 1-17, July.
    11. Sultana, Arifa & Kumar, Amit, 2014. "Development of tortuosity factor for assessment of lignocellulosic biomass delivery cost to a biorefinery," Applied Energy, Elsevier, vol. 119(C), pages 288-295.
    12. Zareei, Samira, 2018. "Evaluation of biogas potential from livestock manures and rural wastes using GIS in Iran," Renewable Energy, Elsevier, vol. 118(C), pages 351-356.
    13. Zahraee, Seyed Mojib & Shiwakoti, Nirajan & Stasinopoulos, Peter, 2022. "Application of geographical information system and agent-based modeling to estimate particle-gaseous pollutantemissions and transportation cost of woody biomass supply chain," Applied Energy, Elsevier, vol. 309(C).
    14. Olli-Jussi Korpinen & Mika Aalto & Raghu KC & Timo Tokola & Tapio Ranta, 2023. "Utilisation of Spatial Data in Energy Biomass Supply Chain Research—A Review," Energies, MDPI, vol. 16(2), pages 1-23, January.
    15. Arnette, Andrew N. & Zobel, Christopher W., 2011. "Spatial analysis of renewable energy potential in the greater southern Appalachian mountains," Renewable Energy, Elsevier, vol. 36(11), pages 2785-2798.
    16. Jayarathna, Lasinidu & Kent, Geoff & O'Hara, Ian & Hobson, Philip, 2020. "A Geographical Information System based framework to identify optimal location and size of biomass energy plants using single or multiple biomass types," Applied Energy, Elsevier, vol. 275(C).
    17. Ferrarini, Andrea & Serra, Paolo & Almagro, María & Trevisan, Marco & Amaducci, Stefano, 2017. "Multiple ecosystem services provision and biomass logistics management in bioenergy buffers: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 277-290.
    18. Nadine Bachmann & Shailesh Tripathi & Manuel Brunner & Herbert Jodlbauer, 2022. "The Contribution of Data-Driven Technologies in Achieving the Sustainable Development Goals," Sustainability, MDPI, vol. 14(5), pages 1-33, February.
    19. Ling, Wen Choong & Verasingham, Arati Banu & Andiappan, Viknesh & Wan, Yoke Kin & Chew, Irene M.L. & Ng, Denny K.S., 2019. "An integrated mathematical optimisation approach to synthesise and analyse a bioelectricity supply chain network," Energy, Elsevier, vol. 178(C), pages 554-571.
    20. Xiang Zhao & Xiaoya Ma & Kun Wang & Yuqing Long & Dongjie Zhang & Zhanchun Xiao, 2017. "A Spatially Explicit Optimization Model for Agricultural Straw-Based Power Plant Site Selection: A Case Study in Hubei Province, China," Sustainability, MDPI, vol. 9(5), pages 1-19, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:35:y:2010:i:9:p:2136-2142. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.