IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v258y2026ics0960148125026485.html

Bio-inspired carbon-stitched 3D boron nitride skeleton with enhanced thermal conductivity and waterproof performance for polyethylene glycol-based composite phase change materials

Author

Listed:
  • Zheng, Ruoxuan
  • Liu, Shuang
  • He, Tianlu
  • Zu, Chaofan
  • Yin, Di
  • Bai, Yufeng
  • Yue, Chunlong
  • Peng, Tai

Abstract

The development of energy storage technologies has emerged as a crucial initiative to address global energy challenges. However, existing phase change materials (PCMs) such as polyethylene glycol (PEG) suffer from inherent drawbacks including low thermal conductivity and poor shape stability. To tackle these issues, this study developed a carbon-stitching strategy that directs 1D boron nitride nanorod (BNNR) and 2D boron nitride nanosheet (BNNS) to co-assemble into a 3D skeleton inspired by natural abalone shell, thereby establishing an efficient heat transfer network. Experimental results demonstrated that the prepared PEG/BNc-10/UV composite PCM exhibited a thermal conductivity of 1.33 W · m−1 K−1. Compared with pure PEG, this represented a 441 % increase in thermal conductivity, while the latent heat retention rate remained as high as 89 %. Through an ingenious design, the encapsulation with UV-curable resin not only prevents the leakage of PEG but also imparts waterproof properties to the composite. This expands the application of PCMs in underwater environments. This study provides a new design paradigm for the development of high-efficiency energy storage materials suitable for diverse environmental conditions.

Suggested Citation

  • Zheng, Ruoxuan & Liu, Shuang & He, Tianlu & Zu, Chaofan & Yin, Di & Bai, Yufeng & Yue, Chunlong & Peng, Tai, 2026. "Bio-inspired carbon-stitched 3D boron nitride skeleton with enhanced thermal conductivity and waterproof performance for polyethylene glycol-based composite phase change materials," Renewable Energy, Elsevier, vol. 258(C).
    • Handle: RePEc:eee:renene:v:258:y:2026:i:c:s0960148125026485
    DOI: 10.1016/j.renene.2025.124984
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148125026485
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2025.124984?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Bharathiraja, R. & Ramkumar, T. & Selvakumar, M. & Radhika, N., 2024. "Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications," Renewable Energy, Elsevier, vol. 222(C).
    2. Sun, Xiping & Yi, Mengmeng & Feng, Bing & Liu, Ruowang & Sun, Lijuan & Zhai, Lanlan & Cao, Hongwei & Zou, Chao, 2021. "Shape-stabilized composite phase change material PEG@TiO2 through in situ encapsulation of PEG into 3D nanoporous TiO2 for thermal energy storage," Renewable Energy, Elsevier, vol. 170(C), pages 27-37.
    3. Shazad, Atif & Uzair, Muhammad & Tufail, Muhammad, 2024. "Impact of blending of phase change material for performance enhancement of solar energy storage," Renewable Energy, Elsevier, vol. 227(C).
    4. Wong, Tan Lo & Vallés, Cristina & Nasser, Adel & Abeykoon, Chamil, 2023. "Effects of boron-nitride-based nanomaterials on the thermal properties of composite organic phase change materials: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 187(C).
    5. Lei, Hui & Wang, Xuezi & Li, Yifan & Xie, Huaqing & Yu, Wei, 2024. "Organic-inorganic hybrid phase change materials with high energy storage density based on porous shaped paraffin/hydrated salt/expanded graphite composites," Energy, Elsevier, vol. 304(C).
    6. Liu, Lu & Fan, Xiaoqiao & Zhang, Yuang & Zhang, Shufen & Wang, Wentao & Jin, Xin & Tang, Bingtao, 2020. "Novel bio-based phase change materials with high enthalpy for thermal energy storage," Applied Energy, Elsevier, vol. 268(C).
    7. Tao, Jialu & Luan, Jingde & Liu, Yue & Qu, Daoyu & Yan, Zheng & Ke, Xin, 2022. "Technology development and application prospects of organic-based phase change materials: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xiong, Chuanyin & Fan, Xing & Jia, Zhixin & Ni, Yonghao, 2026. "The influence of multidimensional structural engineering for phase change materials on their performance and application scenarios: A comprehensive review from 0D nanostructure to 3D macrostructure," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PE).
    2. Karanafti, Aikaterina & Theodosiou, Theodoros & Tsikaloudaki, Katerina, 2022. "Assessment of buildings’ dynamic thermal insulation technologies-A review," Applied Energy, Elsevier, vol. 326(C).
    3. He, Zemin & Yu, Ping & Niu, Lichun & Zhang, Cuihong & Ma, Cheng, 2024. "Photovoltaic panel cooling with new composite of phase change materials and hierarchical nanoparticles," Energy, Elsevier, vol. 308(C).
    4. Fei, Yue & Wu, Tao & Xu, Bin & Huang, Yan-feng & Chen, Xing-ni & Pei, Gang, 2025. "Optimization of hydrochromic properties in hygroscopic salt-porous composites: Toward applications in atmospheric water harvesting and smart window," Energy, Elsevier, vol. 334(C).
    5. Lv, Zhihan & Cheng, Chen & Lv, Haibin, 2023. "Digital twins for secure thermal energy storage in building," Applied Energy, Elsevier, vol. 338(C).
    6. Gan, Zhengheng & Yin, Mei & Dou, Shiqi & Chang, Hong & Jiang, Huicheng, 2025. "Enhanced thermal performance of energy piles based on composite phase change material and random aggregate modelling," Energy, Elsevier, vol. 341(C).
    7. Antonella Sarcinella & Sandra Cunha & José Aguiar & Mariaenrica Frigione, 2024. "Thermo-Chemical Characterization of Organic Phase Change Materials (PCMs) Obtained from Lost Wax Casting Industry," Sustainability, MDPI, vol. 16(16), pages 1-17, August.
    8. Kazaz, Oguzhan & Karimi, Nader & Paul, Manosh C., 2024. "Optically functional bio-based phase change material nanocapsules for highly efficient conversion of sunlight to heat and thermal storage," Energy, Elsevier, vol. 305(C).
    9. Zhang, Liwei & Shang, Bichen & Sun, Weijie & Tao, Yao & Li, Xueren & Tu, Jiyuan, 2024. "Data-driven optimization of nano-PCM arrangements for battery thermal management based on Lattice Boltzmann simulation," Energy, Elsevier, vol. 313(C).
    10. Zhang, Zhongtian & Xing, Meibo & Lian, Xu, 2025. "Experimental and numerical study on cold storage properties of organic/inorganic composites in thermal energy storage," Energy, Elsevier, vol. 316(C).
    11. Lu, Wei & Yu, Anqi & Dong, Hao & He, Zhenglong & Liang, Yuntao & Liu, Weitao & Sun, Yong & Song, Shuanglin, 2023. "High-performance palmityl palmitate phase change microcapsules for thermal energy storage and thermal regulation," Energy, Elsevier, vol. 274(C).
    12. Sharma, Amrita & Raaj, Ridhi V. & Singh, Sarvjeet & Kothadia, Hardik, 2025. "Inducing and controlling supercooling in industrial-grade sodium acetate trihydrate for long-term PCM based thermal energy storage system," Energy, Elsevier, vol. 325(C).
    13. Huang, Xinyu & Liu, Zemin & Lu, Liu & Wang, Qihui & Li, Bo & Yang, Xiaohu & Li, Hailong, 2026. "Study on enhancement of heat release performance of phase change energy storage unit in solar heating and hydrogen production system," Renewable Energy, Elsevier, vol. 256(PB).
    14. Yan, Xinrui & Xie, Baoshan & Li, Chuanchang, 2026. "Phase change materials for aerospace," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PA).
    15. Zhou, Tian & He, Chicheng & Cao, Yaowen & Da, Jiaying & Rao, Zhenghua & Shi, Lei & Li, Hongwei, 2026. "From material design to functional implementation: Performance enhancement mechanisms and application advances in photothermal phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PD).
    16. Es-sakali, Niima & Charai, Mouatassim & Idrissi Kaitouni, Samir & Ait Laasri, Imad & Mghazli, Mohamed Oualid & Cherkaoui, Moha & Pfafferott, Jens & Ukjoo, Sung, 2023. "Energy efficiency and hygrothermal performance of hemp clay walls for Moroccan residential buildings: An integrated lab-scale, in-situ and simulation-based assessment," Applied Energy, Elsevier, vol. 352(C).
    17. Zhang, Zhenxin & Zhao, Xiaoqi & Zhang, Runhua & Cao, Jinzhen, 2024. "Novel phase change materials with superior thermal conductivity and photothermal efficiency derived from preservative-treated wood biochar," Renewable Energy, Elsevier, vol. 237(PC).
    18. Li, Weilin & Li, Rufei & Sui, Wenhai & Liu, Changhai & Yang, Liu, 2024. "Optimizing passive energy savings in rural self-built houses: Integrating phase change materials across China's climate zones," Energy, Elsevier, vol. 311(C).
    19. Ma, Ying & Wang, Xianzhi & Zuo, Hongyan & Zuo, Qingsong & Chen, Wei & Wei, Wenliang & He, Weiyi, 2025. "Mechanistic study of the N-doping enhancement in thermal performance of MOF-based composite phase change material and its application in lithium-ion battery heat dissipation," Energy, Elsevier, vol. 320(C).
    20. Cao, Zhenyu & Sun, Shiyu & Ma, Guihua & Feng, Anyu & Kang, Kang & Sun, Guotao & Li, Jianming, 2026. "Phase change materials for efficient thermal energy storage and its potential applications in sustainable facility agriculture: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 225(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:258:y:2026:i:c:s0960148125026485. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.