IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v145y2020icp2538-2549.html
   My bibliography  Save this article

Thermal performance evaluation and optimal design of building roof with outer-layer shape-stabilized PCM

Author

Listed:
  • Yu, Jinghua
  • Yang, Qingchen
  • Ye, Hong
  • Luo, Yongqiang
  • Huang, Junchao
  • Xu, Xinhua
  • Gang, Wenjie
  • Wang, Jinbo

Abstract

Roof with outer-layer shape-stabilized phase change material (RSPCM) is a building construction that incorporates shape-stabilized phase change material (PCM) into the out layer of the roof. The decrement factor of the roof and the peak temperature of the inner surface can be greatly reduced by using the PCM in summer. CFD numerical simulation is used to investigate the thermal performance of RSPCM. The effects of the phase transition temperature, layer thickness and phase transition temperature radius of PCM are studied numerically. Results show that the suggested PCM thickness is 30 mm and the temperature radius should be as small as possible. The optimum phase transition temperatures are 31–33 °C, 34–36 °C, 36–38 °C, 34–36 °C, and 29–31 °C respectively in severe cold region, cold region, hot summer and cold winter region, hot summer and warm winter region and mild region. The decrement factors at the corresponding optimum phase transition temperature are about 0.030, which are lower than that of the roof without PCM by over 85%. The peak temperatures of the inner roof surface are all decreased by over 3.7 °C. These results can be used as a guideline for optimum design to improve the dynamic thermal performance of roof structure in summer.

Suggested Citation

  • Yu, Jinghua & Yang, Qingchen & Ye, Hong & Luo, Yongqiang & Huang, Junchao & Xu, Xinhua & Gang, Wenjie & Wang, Jinbo, 2020. "Thermal performance evaluation and optimal design of building roof with outer-layer shape-stabilized PCM," Renewable Energy, Elsevier, vol. 145(C), pages 2538-2549.
    • Handle: RePEc:eee:renene:v:145:y:2020:i:c:p:2538-2549
    DOI: 10.1016/j.renene.2019.08.026
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119312133
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2019.08.026?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Skiba, Marta & Mrówczyńska, Maria & Sztubecka, Małgorzata & Bazan-Krzywoszańska, Anna & Kazak, Jan K. & Leśniak, Agnieszka & Janowiec, Filip, 2021. "Probability estimation of the city’s energy efficiency improvement as a result of using the phase change materials in heating networks," Energy, Elsevier, vol. 228(C).
    2. Xu, Bin & Chen, Xing-ni & Fei, Yue & Gan, Wen-tao & Pei, Gang, 2023. "Optimizing the applicability of cool paint through phase change material according to the energy consumption characteristics in different regions," Renewable Energy, Elsevier, vol. 212(C), pages 953-971.
    3. Jinghua Yu & Kangxin Leng & Feifei Wang & Hong Ye & Yongqiang Luo, 2020. "Simulation Study on Dynamic Thermal Performance of a New Ventilated Roof with Form-Stable PCM in Southern China," Sustainability, MDPI, vol. 12(22), pages 1-21, November.
    4. Li, Weilin & Jing, Mingyi & Li, Rufei & Gao, Junxi & Zhu, Jiayin & Li, Ruixin, 2023. "Study of the optimal placement of phase change materials in existing buildings for cooling load reduction - Take the Central Plain of China as an example," Renewable Energy, Elsevier, vol. 209(C), pages 71-84.
    5. Yu, Cairui & Shen, Dongmei & He, Wei & Hu, Zhongting & Zhang, Sheng & Chu, Wenfeng, 2021. "Parametric analysis of the phase change material wall combining with micro-channel heat pipe and sky radiative cooling technology," Renewable Energy, Elsevier, vol. 178(C), pages 1057-1069.
    6. Xie, Xing & Xu, Bin & Chen, Xing-ni & Pei, Gang, 2021. "Turning points emerging in the effect of thermal conductivity of phase change materials on utilization rate of latent heat in buildings," Renewable Energy, Elsevier, vol. 179(C), pages 1522-1536.
    7. Hu, Yue & Guo, Rui & Heiselberg, Per Kvols, 2020. "Performance and control strategy development of a PCM enhanced ventilated window system by a combined experimental and numerical study," Renewable Energy, Elsevier, vol. 155(C), pages 134-152.
    8. Xamán, J. & Rodriguez-Ake, A. & Zavala-Guillén, I. & Hernández-Pérez, I. & Arce, J. & Sauceda, D., 2020. "Thermal performance analysis of a roof with a PCM-layer under Mexican weather conditions," Renewable Energy, Elsevier, vol. 149(C), pages 773-785.
    9. Singh, Aditya Kumar & Rathore, Pushpendra Kumar Singh & Sharma, R.K. & Gupta, Naveen Kumar & Kumar, Rajan, 2023. "Experimental evaluation of composite concrete incorporated with thermal energy storage material for improved thermal behavior of buildings," Energy, Elsevier, vol. 263(PA).
    10. Mohseni, Ehsan & Tang, Waiching, 2021. "Parametric analysis and optimisation of energy efficiency of a lightweight building integrated with different configurations and types of PCM," Renewable Energy, Elsevier, vol. 168(C), pages 865-877.
    11. Yan, Tian & Zhou, Xuan & Xu, Xinhua & Yu, Jinghua & Li, Xianting, 2022. "Parametric analysis on performances of the pipe-encapsulated PCM (PenPCM) wall system coupled with gravity heat-pipe and nocturnal radiant cooler," Renewable Energy, Elsevier, vol. 196(C), pages 161-180.
    12. Xu, Bin & Xie, Xing & Pei, Gang & Chen, Xing-ni, 2020. "New view point on the effect of thermal conductivity on phase change materials based on novel concepts of relative depth of activation and time rate of activation: The case study on a top floor room," Applied Energy, Elsevier, vol. 266(C).
    13. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung, 2020. "Thermal performance of a solar energy storage concrete panel incorporating phase change material aggregates developed for thermal regulation in buildings," Renewable Energy, Elsevier, vol. 160(C), pages 817-829.
    14. Kong, Xiangfei & Jiang, Lina & Yuan, Ye & Qiao, Xu, 2022. "Experimental study on the performance of an active novel vertical partition thermal storage wallboard based on composite phase change material with porous silica and microencapsulation," Energy, Elsevier, vol. 239(PE).
    15. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:145:y:2020:i:c:p:2538-2549. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.