IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v135y2019icp1078-1096.html
   My bibliography  Save this article

Thermal performance of high-altitude solar powered scientific balloon

Author

Listed:
  • Zhu, Weiyu
  • Xu, Yuanming
  • Du, Huafei
  • Li, Jun

Abstract

High-altitude solar powered scientific balloon can be powered by thin-film solar panel mounted on the balloon. The temperature change of solar panel might have significant influence on the thermal performance of the balloon, which is closely related to the superheat and overpressure of balloon. The thermal model of solar powered scientific balloon was presented to investigate the thermal performance and compare with unpowered balloon. A user define function program in computational fluid dynamic software was developed based on the model. The effects of layout parameter and area of solar panel on the thermal performance of solar powered balloon were also analyzed. The results show that the temperature of envelope and internal helium of solar powered balloon is much higher than that of unpowered balloon during the daylight, and the maximum velocity of internal helium is decreased with the existence of solar panel. Moreover, the increase of the height and area of solar panel would result the raise of temperature and pressure of internal Helium, but the helium velocity and the flow distribution were hardly changed. The present work may be used to guide the design of solar energy system and the thermal control of scientific balloon.

Suggested Citation

  • Zhu, Weiyu & Xu, Yuanming & Du, Huafei & Li, Jun, 2019. "Thermal performance of high-altitude solar powered scientific balloon," Renewable Energy, Elsevier, vol. 135(C), pages 1078-1096.
    • Handle: RePEc:eee:renene:v:135:y:2019:i:c:p:1078-1096
    DOI: 10.1016/j.renene.2018.12.083
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148118315301
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2018.12.083?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jeong, D.I. & St-Hilaire, A. & Gratton, Y. & Bélanger, C. & Saad, C., 2017. "A guideline to select an estimation model of daily global solar radiation between geostatistical interpolation and stochastic simulation approaches," Renewable Energy, Elsevier, vol. 103(C), pages 70-80.
    2. Zhang, Lanchuan & Li, Jun & Meng, Junhui & Du, Huafei & Lv, Mingyun & Zhu, Weiyu, 2018. "Thermal performance analysis of a high-altitude solar-powered hybrid airship," Renewable Energy, Elsevier, vol. 125(C), pages 890-906.
    3. Al-Nimr, M.A. & Al-Darawsheh, I.A. & AL-Khalayleh, L.A., 2018. "A novel hybrid cavity solar thermal collector," Renewable Energy, Elsevier, vol. 115(C), pages 299-307.
    4. Balaji, K. & Iniyan, S. & Goic, Ranko, 2018. "Thermal performance of solar water heater using velocity enhancer," Renewable Energy, Elsevier, vol. 115(C), pages 887-895.
    5. Zhu, Weiyu & Xu, Yuanming & Du, Huafei & Zhang, Lanchuan & Li, Jun, 2018. "Transmittance optimization of solar array encapsulant for high-altitude airship," Renewable Energy, Elsevier, vol. 125(C), pages 796-805.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jiang, Yi & Lv, Mingyun & Sun, Kangwen, 2022. "Effects of installation angle on the energy performance for photovoltaic cells during airship cruise flight," Energy, Elsevier, vol. 258(C).
    2. Jiang, Yi & Lv, Mingyun & Wang, Chuanzhi & Meng, Xiangrui & Ouyang, Siyue & Wang, Guodong, 2021. "Layout optimization of stratospheric balloon solar array based on energy production," Energy, Elsevier, vol. 229(C).
    3. Jiang, Yi & Lv, Mingyun & Qu, Zhipeng & Zhang, Lanchuan, 2020. "Performance evaluation for scientific balloon station-keeping strategies considering energy management strategy," Renewable Energy, Elsevier, vol. 156(C), pages 290-302.
    4. Liu, Yang & Du, Huafei & Xu, Ziyuan & Sun, Kangwen & Lv, Mingyun, 2022. "Mission-based optimization of insulation layer for the solar array on the stratospheric airship," Renewable Energy, Elsevier, vol. 191(C), pages 318-329.
    5. Gupta, Sowmya & Rajhans, Chinmay & Duttagupta, Siddhartha P. & Mitra, Mira, 2021. "Hybrid energy design for lighter than air systems," Renewable Energy, Elsevier, vol. 173(C), pages 781-794.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiang, Yi & Lv, Mingyun & Wang, Chuanzhi & Meng, Xiangrui & Ouyang, Siyue & Wang, Guodong, 2021. "Layout optimization of stratospheric balloon solar array based on energy production," Energy, Elsevier, vol. 229(C).
    2. Jiang, Yi & Lv, Mingyun & Qu, Zhipeng & Zhang, Lanchuan, 2020. "Performance evaluation for scientific balloon station-keeping strategies considering energy management strategy," Renewable Energy, Elsevier, vol. 156(C), pages 290-302.
    3. Liu, Yang & Du, Huafei & Xu, Ziyuan & Sun, Kangwen & Lv, Mingyun, 2022. "Mission-based optimization of insulation layer for the solar array on the stratospheric airship," Renewable Energy, Elsevier, vol. 191(C), pages 318-329.
    4. Meng, Junhui & Liu, Siyu & Yao, Zhongbing & Lv, Mingyun, 2019. "Optimization design of a thermal protection structure for the solar array of stratospheric airships," Renewable Energy, Elsevier, vol. 133(C), pages 593-605.
    5. Sun, Henan & Ge, Ya & Liu, Wei & Liu, Zhichun, 2019. "Geometric optimization of two-stage thermoelectric generator using genetic algorithms and thermodynamic analysis," Energy, Elsevier, vol. 171(C), pages 37-48.
    6. Qiumin Dai & Daoming Xing & Xiande Fang & Yingjie Zhao, 2021. "Conceptual Design of an Energy System for High Altitude Airships Considering Thermal Effect," Energies, MDPI, vol. 14(14), pages 1-13, July.
    7. Yeji Lee & Doosung Choi & Yongho Jung & Myeongjin Ko, 2022. "Application of Technology to Develop a Framework for Predicting Power Output of a PV System Based on a Spatial Interpolation Technique: A Case Study in South Korea," Energies, MDPI, vol. 15(22), pages 1-22, November.
    8. Bany Mousa, Osama & Kara, Sami & Taylor, Robert A., 2019. "Comparative energy and greenhouse gas assessment of industrial rooftop-integrated PV and solar thermal collectors," Applied Energy, Elsevier, vol. 241(C), pages 113-123.
    9. Visa, Ion & Moldovan, Macedon & Duta, Anca, 2019. "Novel triangle flat plate solar thermal collector for facades integration," Renewable Energy, Elsevier, vol. 143(C), pages 252-262.
    10. Nouri, Milad & Homaee, Mehdi, 2022. "Reference crop evapotranspiration for data-sparse regions using reanalysis products," Agricultural Water Management, Elsevier, vol. 262(C).
    11. Vásquez, Cristina & Célleri, Rolando & Córdova, Mario & Carrillo-Rojas, Galo, 2022. "Improving reference evapotranspiration (ETo) calculation under limited data conditions in the high Tropical Andes," Agricultural Water Management, Elsevier, vol. 262(C).
    12. Poongavanam, Ganesh Kumar & Kumar, Balaji & Duraisamy, Sakthivadivel & Panchabikesan, Karthik & Ramalingam, Velraj, 2019. "Heat transfer and pressure drop performance of solar glycol/activated carbon based nanofluids in shot peened double pipe heat exchanger," Renewable Energy, Elsevier, vol. 140(C), pages 580-591.
    13. Ceballos, Juan Carlos & Porfirio, Anthony Carlos Silva & Oricchio, Patricio Alberto & Posse, Gabriela, 2022. "Characterization of the annual regime of surface solar irradiance over Argentine Pampean Region using GL1.2 satellite-based data," Renewable Energy, Elsevier, vol. 194(C), pages 526-537.
    14. Poongavanam, Ganesh Kumar & Panchabikesan, Karthik & Leo, Anto Joseph Deeyoko & Ramalingam, Velraj, 2018. "Experimental investigation on heat transfer augmentation of solar air heater using shot blasted V-corrugated absorber plate," Renewable Energy, Elsevier, vol. 127(C), pages 213-229.
    15. Dimitrios N. Korres & Evangelos Bellos & Christos Tzivanidis, 2022. "Integration of a Linear Cavity Receiver in an Asymmetric Compound Parabolic Collector," Energies, MDPI, vol. 15(22), pages 1-19, November.
    16. Balaji, K. & Ganesh Kumar, P. & Sakthivadivel, D. & Vigneswaran, V.S. & Iniyan, S., 2019. "Experimental investigation on flat plate solar collector using frictionally engaged thermal performance enhancer in the absorber tube," Renewable Energy, Elsevier, vol. 142(C), pages 62-72.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:135:y:2019:i:c:p:1078-1096. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.