IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v259y2023ics0925527323000506.html
   My bibliography  Save this article

Impact of reverse channel competition, individual rationality, and information asymmetry on multi-channel closed-loop supply chain design

Author

Listed:
  • Suvadarshini, Pinakhi
  • Biswas, Indranil
  • Srivastava, Samir K.

Abstract

Original equipment manufacturers (OEM) are focusing on remanufactured product business to improve their profitability and are using a multi-channel recollection strategy to improve recollection efficiency. Motivated by this phenomenon, we study a closed-loop supply chain consisting of an OEM, a retailer and a third-party vendor (3V) where the OEM designs an efficient multi-channel recollection structure when recollection agents competitively recollect used products. We analyze three different return channel structures under simultaneous influence of competition, collection efficiencies, individual rationality and information asymmetry. Our key findings are as follows: (i) OEM employs multiple recollection agents only if the recollection competition is low, (ii) OEM’s profit level is maximum when it recollects used products with one external agent (either a 3V or a retailer), (iii) with individual rationality constraint, there exist threshold cost values for both the OEM and retailer below which they do not trade and these values increase in consumer’s valuation of remanufactured products, (iv) OEM improves profitability by gathering information about external recollection agent’s cost coefficient; if the OEM engages only external agents for recollection, then the value of this information is zero, (v) when both competition and recollection cost are low, OEM prefers to recollect with one external agent and when recollection cost is high, OEM completely outsources recollection. We test the robustness of our findings by studying the influence of various channel coordinating contracts on the forward and reverse channels and the influence of quality and quantity dependent transfer pricing on the design of the multi-channel recollection.

Suggested Citation

  • Suvadarshini, Pinakhi & Biswas, Indranil & Srivastava, Samir K., 2023. "Impact of reverse channel competition, individual rationality, and information asymmetry on multi-channel closed-loop supply chain design," International Journal of Production Economics, Elsevier, vol. 259(C).
    • Handle: RePEc:eee:proeco:v:259:y:2023:i:c:s0925527323000506
    DOI: 10.1016/j.ijpe.2023.108818
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527323000506
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2023.108818?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yan, Ruiliang & Cao, Zixia, 2017. "Product returns, asymmetric information, and firm performance," International Journal of Production Economics, Elsevier, vol. 185(C), pages 211-222.
    2. Jing Zhao & Jie Wei & Xiaochen Sun, 2017. "Coordination of fuzzy closed-loop supply chain with price dependent demand under symmetric and asymmetric information conditions," Annals of Operations Research, Springer, vol. 257(1), pages 469-489, October.
    3. Han, Xiaohua & Wu, Haiyan & Yang, Qianxia & Shang, Jennifer, 2016. "Reverse channel selection under remanufacturing risks: Balancing profitability and robustness," International Journal of Production Economics, Elsevier, vol. 182(C), pages 63-72.
    4. Liu, Huihui & Lei, Ming & Deng, Honghui & Keong Leong, G. & Huang, Tao, 2016. "A dual channel, quality-based price competition model for the WEEE recycling market with government subsidy," Omega, Elsevier, vol. 59(PB), pages 290-302.
    5. Wang, Qifei & Hong, Xianpei & Gong, Yeming (Yale) & Chen, Wanying (Amanda), 2020. "Collusion or Not: The optimal choice of competing retailers in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 225(C).
    6. Heydari, Jafar & Govindan, Kannan & Sadeghi, Razieh, 2018. "Reverse supply chain coordination under stochastic remanufacturing capacity," International Journal of Production Economics, Elsevier, vol. 202(C), pages 1-11.
    7. Jeong, In-Jae, 2012. "A centralized/decentralized design of a full return contract for a risk-free manufacturer and a risk-neutral retailer under partial information sharing," International Journal of Production Economics, Elsevier, vol. 136(1), pages 110-115.
    8. Yan, Wei & Xiong, Yu & Xiong, Zhongkai & Guo, Nian, 2015. "Bricks vs. clicks: Which is better for marketing remanufactured products?," European Journal of Operational Research, Elsevier, vol. 242(2), pages 434-444.
    9. He, Qidong & Wang, Nengmin & Yang, Zhen & He, Zhengwen & Jiang, Bin, 2019. "Competitive collection under channel inconvenience in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 275(1), pages 155-166.
    10. Wang, Junbin & Zhang, Ting & Fan, Xiaojun, 2020. "Reverse channel design with a dominant retailer and upstream competition in emerging markets: Retailer- or manufacturer- collection?," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 137(C).
    11. Charles J. Corbett & Deming Zhou & Christopher S. Tang, 2004. "Designing Supply Contracts: Contract Type and Information Asymmetry," Management Science, INFORMS, vol. 50(4), pages 550-559, April.
    12. Bulmus, Serra Caner & Zhu, Stuart X. & Teunter, Ruud, 2014. "Competition for cores in remanufacturing," European Journal of Operational Research, Elsevier, vol. 233(1), pages 105-113.
    13. Wu, Xiaole & Zhou, Yu, 2017. "The optimal reverse channel choice under supply chain competition," European Journal of Operational Research, Elsevier, vol. 259(1), pages 63-66.
    14. Hou, Jing & Zeng, Amy Z. & Zhao, Lindu, 2010. "Coordination with a backup supplier through buy-back contract under supply disruption," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 46(6), pages 881-895, November.
    15. Hong, Xianpei & Xu, Lei & Du, Peng & Wang, Wenjuan, 2015. "Joint advertising, pricing and collection decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 167(C), pages 12-22.
    16. Pazoki, Mostafa & Samarghandi, Hamed, 2020. "Take-back regulation: Remanufacturing or Eco-design?," International Journal of Production Economics, Elsevier, vol. 227(C).
    17. Amy Z. Zeng, 2013. "Coordination mechanisms for a three‐stage reverse supply chain to increase profitable returns," Naval Research Logistics (NRL), John Wiley & Sons, vol. 60(1), pages 31-45, February.
    18. Feng, Lipan & Govindan, Kannan & Li, Chunfa, 2017. "Strategic planning: Design and coordination for dual-recycling channel reverse supply chain considering consumer behavior," European Journal of Operational Research, Elsevier, vol. 260(2), pages 601-612.
    19. R. Canan Savaskan & Luk N. Van Wassenhove, 2006. "Reverse Channel Design: The Case of Competing Retailers," Management Science, INFORMS, vol. 52(1), pages 1-14, January.
    20. Biswas, Indranil & Avittathur, Balram & Chatterjee, Ashis K, 2016. "Impact of structure, market share and information asymmetry on supply contracts for a single supplier multiple buyer network," European Journal of Operational Research, Elsevier, vol. 253(3), pages 593-601.
    21. Huang, Min & Song, Min & Lee, Loo Hay & Ching, Wai Ki, 2013. "Analysis for strategy of closed-loop supply chain with dual recycling channel," International Journal of Production Economics, Elsevier, vol. 144(2), pages 510-520.
    22. Choi, Tsan-Ming & Li, Yongjian & Xu, Lei, 2013. "Channel leadership, performance and coordination in closed loop supply chains," International Journal of Production Economics, Elsevier, vol. 146(1), pages 371-380.
    23. Mohannad Radhi & Guoqing Zhang, 2016. "Optimal configuration of remanufacturing supply network with return quality decision," International Journal of Production Research, Taylor & Francis Journals, vol. 54(5), pages 1487-1502, March.
    24. Teunter, Ruud H. & Flapper, Simme Douwe P., 2011. "Optimal core acquisition and remanufacturing policies under uncertain core quality fractions," European Journal of Operational Research, Elsevier, vol. 210(2), pages 241-248, April.
    25. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    26. Albert Y. Ha, 2001. "Supplier‐buyer contracting: Asymmetric cost information and cutoff level policy for buyer participation," Naval Research Logistics (NRL), John Wiley & Sons, vol. 48(1), pages 41-64, February.
    27. Hong, Xianpei & Govindan, Kannan & Xu, Lei & Du, Peng, 2017. "Quantity and collection decisions in a closed-loop supply chain with technology licensing," European Journal of Operational Research, Elsevier, vol. 256(3), pages 820-829.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Yong & Jiang, Qiong & Guan, Xu & Guan, Xiangyang, 2023. "Recycling channel design and coordination in a reverse supply chain with customer green preference," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 179(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ehsan Shekarian & Simme Douwe Flapper, 2021. "Analyzing the Structure of Closed-Loop Supply Chains: A Game Theory Perspective," Sustainability, MDPI, vol. 13(3), pages 1-32, January.
    2. Matsui, Kenji, 2023. "Dual-recycling channel reverse supply chain design of recycling platforms under acquisition price competition," International Journal of Production Economics, Elsevier, vol. 259(C).
    3. Matsui, Kenji, 2022. "Optimal timing of acquisition price announcement for used products in a dual-recycling channel reverse supply chain," European Journal of Operational Research, Elsevier, vol. 300(2), pages 615-632.
    4. Pietro De Giovanni & Georges Zaccour, 2022. "A selective survey of game-theoretic models of closed-loop supply chains," Annals of Operations Research, Springer, vol. 314(1), pages 77-116, July.
    5. He, Qidong & Wang, Nengmin & Browning, Tyson R. & Jiang, Bin, 2022. "Competitive collection with convenience-perceived customers," European Journal of Operational Research, Elsevier, vol. 303(1), pages 239-254.
    6. Pietro Giovanni & Georges Zaccour, 2019. "A selective survey of game-theoretic models of closed-loop supply chains," 4OR, Springer, vol. 17(1), pages 1-44, March.
    7. Sarkar, Sumit & Bhala, Shrey, 2021. "Coordinating a closed loop supply chain with fairness concern by a constant wholesale price contract," European Journal of Operational Research, Elsevier, vol. 295(1), pages 140-156.
    8. Wang, Qifei & Hong, Xianpei & Gong, Yeming (Yale) & Chen, Wanying (Amanda), 2020. "Collusion or Not: The optimal choice of competing retailers in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 225(C).
    9. Bo Wang & Ning Wang, 2022. "Decision Models for a Dual-Recycling Channel Reverse Supply Chain with Consumer Strategic Behavior," Sustainability, MDPI, vol. 14(17), pages 1-18, August.
    10. Shiqi Xu & Hui Liu & Guangye Xu, 2021. "Selection of Recycling Channels and Product Eco-Design with Take-Back Regulation," Sustainability, MDPI, vol. 13(16), pages 1-17, August.
    11. Yande Gong & Mengze Chen & Yuliang Zhuang, 2019. "Decision-Making and Performance Analysis of Closed-Loop Supply Chain under Different Recycling Modes and Channel Power Structures," Sustainability, MDPI, vol. 11(22), pages 1-26, November.
    12. He, Peng & He, Yong & Xu, Henry, 2019. "Channel structure and pricing in a dual-channel closed-loop supply chain with government subsidy," International Journal of Production Economics, Elsevier, vol. 213(C), pages 108-123.
    13. Zhou, Yongyi & Zhang, Yulin & Wahab, M.I.M. & Goh, Mark, 2023. "Channel leadership and performance for a closed-loop supply chain considering competition," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    14. Jalali, Hamed & Ansaripoor, Amir H. & De Giovanni, Pietro, 2020. "Closed-loop supply chains with complementary products," International Journal of Production Economics, Elsevier, vol. 229(C).
    15. He, Qidong & Wang, Nengmin & Yang, Zhen & He, Zhengwen & Jiang, Bin, 2019. "Competitive collection under channel inconvenience in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 275(1), pages 155-166.
    16. Yanting Huang & Zongjun Wang, 2017. "Dual-Recycling Channel Decision in a Closed-Loop Supply Chain with Cost Disruptions," Sustainability, MDPI, vol. 9(11), pages 1-28, November.
    17. Emad Sane Zerang & Ata Allah Taleizadeh & Jafar Razmi, 2018. "Analytical comparisons in a three-echelon closed-loop supply chain with price and marketing effort-dependent demand: game theory approaches," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 20(1), pages 451-478, February.
    18. Zuqing Huang & Wei Shao & Lijun Meng & Guoqing Zhang & Qiang (Patrick) Qiang, 2022. "Pricing Decision for a Closed-Loop Supply Chain with Technology Licensing under Collection and Remanufacturing Cost Disruptions," Sustainability, MDPI, vol. 14(6), pages 1-19, March.
    19. Wu, Cheng-Han & Kao, Yi-Jhe, 2018. "Cooperation regarding technology development in a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 267(2), pages 523-539.
    20. Hong, Xianpei & Cao, Xinlu & Gong, Yeming & Chen, Wanying, 2021. "Quality information acquisition and disclosure with green manufacturing in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 232(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:259:y:2023:i:c:s0925527323000506. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.