IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v200y2018icp291-301.html
   My bibliography  Save this article

The impact of wearable devices and performance payments on health outcomes

Author

Listed:
  • Tarakci, Hakan
  • Kulkarni, Shailesh
  • Ozdemir, Zafer D.

Abstract

In this paper, we study a healthcare system consisting of a healthcare provider and a patient. We first look at a patient with a chronic condition, such as asthma or diabetes, where the patient needs to go through a restorative treatment when she falls sick and through an occasional full treatment. We assume that the health condition of the patient deteriorates faster over time; hence, the need for the full treatment. Borrowing from maintenance/reliability techniques to describe a system prone to failure, we model the health condition of the patient as a reliability problem and find the optimal frequency of full treatment visits to the hospital. We then assume that the patient can use a wearable device that can reduce the health deterioration rate due to more accurate and real-time information; it can also be used to partially administer restorative treatments. The healthcare provider chooses the optimal technology level of the wearable devices, and depending on the cost, we find that they might not always go for the most advanced technology available. We also show that the use of wearable devices increases the overall health condition of the patient. We then apply the same procedure to a patient with a critical condition where each bout of sickness needs to be treated fully instead of a corrective/restorative treatment of the chronic patient. We then quantify the benefits of wearables (especially in terms of patient wellness) in a numerical study.

Suggested Citation

  • Tarakci, Hakan & Kulkarni, Shailesh & Ozdemir, Zafer D., 2018. "The impact of wearable devices and performance payments on health outcomes," International Journal of Production Economics, Elsevier, vol. 200(C), pages 291-301.
    • Handle: RePEc:eee:proeco:v:200:y:2018:i:c:p:291-301
    DOI: 10.1016/j.ijpe.2018.04.003
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527318301580
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2018.04.003?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Meller, Russell D. & Kim, David S., 1996. "The impact of preventive maintenance on system cost and buffer size," European Journal of Operational Research, Elsevier, vol. 95(3), pages 577-591, December.
    2. Wang, Hongzhou, 2002. "A survey of maintenance policies of deteriorating systems," European Journal of Operational Research, Elsevier, vol. 139(3), pages 469-489, June.
    3. Zafer Ozdemir & Jack Barron & Subhajyoti Bandyopadhyay, 2011. "An Analysis of the Adoption of Digital Health Records Under Switching Costs," Information Systems Research, INFORMS, vol. 22(3), pages 491-503, September.
    4. Hakan Tarakci & Kwei Tang & Sunantha Teyarachakul, 2013. "Learning and forgetting effects on maintenance outsourcing," IISE Transactions, Taylor & Francis Journals, vol. 45(4), pages 449-463.
    5. Hakan Tarakci, 2016. "Two types of learning effects on maintenance activities," International Journal of Production Research, Taylor & Francis Journals, vol. 54(6), pages 1721-1734, March.
    6. R. Pascual & D. Godoy & H. Figueroa, 2013. "Optimizing maintenance service contracts under imperfect maintenance and a finite time horizon," Applied Stochastic Models in Business and Industry, John Wiley & Sons, vol. 29(5), pages 564-577, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhao, Heng & Liu, Zixian & Li, Mei & Liang, Lijun, 2022. "Optimal monitoring policies for chronic diseases under healthcare warranty," Socio-Economic Planning Sciences, Elsevier, vol. 84(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dimitrakos, T.D. & Kyriakidis, E.G., 2008. "A semi-Markov decision algorithm for the maintenance of a production system with buffer capacity and continuous repair times," International Journal of Production Economics, Elsevier, vol. 111(2), pages 752-762, February.
    2. Karamatsoukis, C.C. & Kyriakidis, E.G., 2010. "Optimal maintenance of two stochastically deteriorating machines with an intermediate buffer," European Journal of Operational Research, Elsevier, vol. 207(1), pages 297-308, November.
    3. Lisa M. Maillart & Xiang Fang, 2006. "Optimal maintenance policies for serial, multi‐machine systems with non‐instantaneous repairs," Naval Research Logistics (NRL), John Wiley & Sons, vol. 53(8), pages 804-813, December.
    4. Kyriakidis, E.G. & Dimitrakos, T.D., 2006. "Optimal preventive maintenance of a production system with an intermediate buffer," European Journal of Operational Research, Elsevier, vol. 168(1), pages 86-99, January.
    5. Thomas Sloan, 2008. "Simultaneous determination of production and maintenance schedules using in‐line equipment condition and yield information," Naval Research Logistics (NRL), John Wiley & Sons, vol. 55(2), pages 116-129, March.
    6. Wang, Yukun & Liu, Yiliu & Li, Xiaopeng & Chen, Junyan, 2019. "Multi-phase reliability growth test planning for repairable products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 315-326.
    7. Borrero, J.S. & Akhavan-Tabatabaei, R., 2013. "Time and inventory dependent optimal maintenance policies for single machine workstations: An MDP approach," European Journal of Operational Research, Elsevier, vol. 228(3), pages 545-555.
    8. Hashemi, M. & Asadi, M. & Zarezadeh, S., 2020. "Optimal maintenance policies for coherent systems with multi-type components," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    9. Xiang, Yisha, 2013. "Joint optimization of X¯ control chart and preventive maintenance policies: A discrete-time Markov chain approach," European Journal of Operational Research, Elsevier, vol. 229(2), pages 382-390.
    10. Coria, V.H. & Maximov, S. & Rivas-Dávalos, F. & Melchor, C.L. & Guardado, J.L., 2015. "Analytical method for optimization of maintenance policy based on available system failure data," Reliability Engineering and System Safety, Elsevier, vol. 135(C), pages 55-63.
    11. Berrade, M.D. & Cavalcante, C.A.V. & Scarf, P.A., 2013. "Modelling imperfect inspection over a finite horizon," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 18-29.
    12. Seyed Habib A. Rahmati & Abbas Ahmadi & Kannan Govindan, 2018. "A novel integrated condition-based maintenance and stochastic flexible job shop scheduling problem: simulation-based optimization approach," Annals of Operations Research, Springer, vol. 269(1), pages 583-621, October.
    13. Wu, Shaomin & Scarf, Philip, 2015. "Decline and repair, and covariate effects," European Journal of Operational Research, Elsevier, vol. 244(1), pages 219-226.
    14. Finkelstein, Maxim & Cha, Ji Hwan & Langston, Amy, 2023. "Improving classical optimal age-replacement policies for degrading items," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    15. Andrei Sleptchenko & M. Eric Johnson, 2015. "Maintaining Secure and Reliable Distributed Control Systems," INFORMS Journal on Computing, INFORMS, vol. 27(1), pages 103-117, February.
    16. Zhengxin Zhang & Xiaosheng Si & Changhua Hu & Xiangyu Kong, 2015. "Degradation modeling–based remaining useful life estimation: A review on approaches for systems with heterogeneity," Journal of Risk and Reliability, , vol. 229(4), pages 343-355, August.
    17. Sharma, Mahak & Sehrawat, Rajat, 2020. "A hybrid multi-criteria decision-making method for cloud adoption: Evidence from the healthcare sector," Technology in Society, Elsevier, vol. 61(C).
    18. Ji Hwan Cha & Maxim Finkelstein, 2020. "On optimal life extension for degrading systems," Journal of Risk and Reliability, , vol. 234(3), pages 487-495, June.
    19. Ekin, Tahir, 2018. "Integrated maintenance and production planning with endogenous uncertain yield," Reliability Engineering and System Safety, Elsevier, vol. 179(C), pages 52-61.
    20. van Noortwijk, J.M., 2009. "A survey of the application of gamma processes in maintenance," Reliability Engineering and System Safety, Elsevier, vol. 94(1), pages 2-21.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:200:y:2018:i:c:p:291-301. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.