IDEAS home Printed from https://ideas.repec.org/a/eee/phsmap/v534y2019ics0378437119312385.html
   My bibliography  Save this article

An experimental investigation for study the rheological behavior of water–carbon nanotube/magnetite nanofluid subjected to a magnetic field

Author

Listed:
  • Talebizadehsardari, Pouyan
  • Shahsavar, Amin
  • Toghraie, Davood
  • Barnoon, Pouya

Abstract

This study aims at experimentally investigating the influence of magnetic field on the rheological behavior of water–carbon nanotube (CNT)/magnetite (Fe3O4) nanofluid. Tetramethylammonium hydroxide (TMAH) and Gum arabic (GA) are respectively used to stabilize the nanofluid. Scanning Electron Microscope (SEM), Dynamic Light Scattering (DLS) and X-ray Diffraction (XRD) methods were used to characterize the prepared nanofluid samples. Experiments were performed to evaluate the viscosity of water–CNT/magnetite nanofluid in the shear rate range of 1–100 s−1, volume fraction range of 0.5-1.5%, and magnetic field strength range of 0–480 mT. It was found that the presence of an external magnetic field causes an increase in the viscosity of the water–CNT/magnetite nanofluid. In addition, the results depicted that the viscosity of the nanofluid augments by boosting the concentration of the nano-materials. Moreover, it was reported that increasing the magnetic field strength to more than 360 mT has a negligible influence on the augmentation of nanofluid viscosity. Furthermore, the non-Newtonian shear thinning behavior was depicted because of the decrease in viscosity with intensifying the shear rates.

Suggested Citation

  • Talebizadehsardari, Pouyan & Shahsavar, Amin & Toghraie, Davood & Barnoon, Pouya, 2019. "An experimental investigation for study the rheological behavior of water–carbon nanotube/magnetite nanofluid subjected to a magnetic field," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 534(C).
    • Handle: RePEc:eee:phsmap:v:534:y:2019:i:c:s0378437119312385
    DOI: 10.1016/j.physa.2019.122129
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378437119312385
    Download Restriction: Full text for ScienceDirect subscribers only. Journal offers the option of making the article available online on Science direct for a fee of $3,000
    File URL: https://libkey.io/10.1016/j.physa.2019.122129?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Raja, M. & Vijayan, R. & Dineshkumar, P. & Venkatesan, M., 2016. "Review on nanofluids characterization, heat transfer characteristics and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 163-173.
    2. Ruhani, Behrooz & Barnoon, Pouya & Toghraie, Davood, 2019. "Statistical investigation for developing a new model for rheological behavior of Silica–ethylene glycol/Water hybrid Newtonian nanofluid using experimental data," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 616-627.
    3. Ruhani, Behrooz & Toghraie, Davood & Hekmatifar, Maboud & Hadian, Mahdieh, 2019. "Statistical investigation for developing a new model for rheological behavior of ZnO–Ag (50%–50%)/Water hybrid Newtonian nanofluid using experimental data," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 741-751.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiaohong, Dai & Huajiang, Chen & Bagherzadeh, Seyed Amin & Shayan, Masoud & Akbari, Mohammad, 2020. "Statistical estimation the thermal conductivity of MWCNTs-SiO2/Water-EG nanofluid using the ridge regression method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    2. Rostami, Sara & Ahmadi-Danesh-Ashtiani, Hossein & Toghraie, Davood & Fazaeli, Reza, 2020. "A statistical method for simulation of boiling flow inside a Platinum microchannel," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).
    3. Jourabian, Mahmoud & Rabienataj Darzi, A. Ali & Akbari, Omid Ali & Toghraie, Davood, 2020. "The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Daniali, Omid Ali & Toghraie, Davood & Eftekhari, S. Ali, 2020. "Thermo-hydraulic and economic optimization of Iranol refinery oil heat exchanger with Copper oxide nanoparticles using MOMBO," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 540(C).
    2. Xiaohong, Dai & Huajiang, Chen & Bagherzadeh, Seyed Amin & Shayan, Masoud & Akbari, Mohammad, 2020. "Statistical estimation the thermal conductivity of MWCNTs-SiO2/Water-EG nanofluid using the ridge regression method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    3. Toghraie, Davood & Sina, Nima & Jolfaei, Niyusha Adavoodi & Hajian, Mehdi & Afrand, Masoud, 2019. "Designing an Artificial Neural Network (ANN) to predict the viscosity of Silver/Ethylene glycol nanofluid at different temperatures and volume fraction of nanoparticles," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 534(C).
    4. Ahmed, Waqar & Kazi, S.N. & Chowdhury, Z.Z. & Johan, Mohd Rafie Bin & Mehmood, Shahid & Soudagar, Manzoore Elahi M. & Mujtaba, M.A. & Gul, M. & Ahmad, Muhammad Shakeel, 2021. "Heat transfer growth of sonochemically synthesized novel mixed metal oxide ZnO+Al2O3+TiO2/DW based ternary hybrid nanofluids in a square flow conduit," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    5. Rostami, Sara & Ahmadi-Danesh-Ashtiani, Hossein & Toghraie, Davood & Fazaeli, Reza, 2020. "A statistical method for simulation of boiling flow inside a Platinum microchannel," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).
    6. Ahmadi, Mohammad Hossein & Ghazvini, Mahyar & Maddah, Heydar & Kahani, Mostafa & Pourfarhang, Samira & Pourfarhang, Amin & Heris, Saeed Zeinali, 2020. "Prediction of the pressure drop for CuO/(Ethylene glycol-water) nanofluid flows in the car radiator by means of Artificial Neural Networks analysis integrated with genetic algorithm," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).
    7. Sarafraz, M.M. & Tlili, I. & Tian, Zhe & Bakouri, Mohsen & Safaei, Mohammad Reza, 2019. "Smart optimization of a thermosyphon heat pipe for an evacuated tube solar collector using response surface methodology (RSM)," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 534(C).
    8. Suganthi, K.S. & Rajan, K.S., 2017. "Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 226-255.
    9. Said, Zafar & El Haj Assad, M. & Hachicha, Ahmed Amine & Bellos, Evangelos & Abdelkareem, Mohammad Ali & Alazaizeh, Duha Zeyad & Yousef, Bashria A.A., 2019. "Enhancing the performance of automotive radiators using nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 183-194.
    10. Khan, A.M. & Liang, L. & Mia, M. & Gupta, M.K. & Wei, Z. & Jamil, M. & Ning, H., 2021. "Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    11. Elsheikh, A.H. & Sharshir, S.W. & Mostafa, Mohamed E. & Essa, F.A. & Ahmed Ali, Mohamed Kamal, 2018. "Applications of nanofluids in solar energy: A review of recent advances," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3483-3502.
    12. Bommana Lavanya & Jorige Girish Kumar & Macherla Jayachandra Babu & Chakravarthula Sivakrishnam Raju & Nehad Ali Shah & Prem Junsawang, 2022. "Irreversibility Analysis in the Ethylene Glycol Based Hybrid Nanofluid Flow amongst Expanding/Contracting Walls When Quadratic Thermal Radiation and Arrhenius Activation Energy Are Significant," Mathematics, MDPI, vol. 10(16), pages 1-22, August.
    13. Hemmati-Sarapardeh, Abdolhossein & Varamesh, Amir & Husein, Maen M. & Karan, Kunal, 2018. "On the evaluation of the viscosity of nanofluid systems: Modeling and data assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 313-329.
    14. Ma, Ting & Guo, Zhixiong & Lin, Mei & Wang, Qiuwang, 2021. "Recent trends on nanofluid heat transfer machine learning research applied to renewable energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    15. Zhanxiao Kang & Liqiu Wang, 2017. "Effect of Thermal-Electric Cross Coupling on Heat Transport in Nanofluids," Energies, MDPI, vol. 10(1), pages 1-13, January.
    16. Pirmoradian, Mostafa & Torkan, Ehsan & Zali, Hamid & Hashemian, Mohammad & Toghraie, Davood, 2020. "Statistical and parametric instability analysis for delivery of nanoparticles through embedded DWCNT," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 554(C).
    17. Jourabian, Mahmoud & Rabienataj Darzi, A. Ali & Akbari, Omid Ali & Toghraie, Davood, 2020. "The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).
    18. Minea, Alina Adriana, 2017. "Challenges in hybrid nanofluids behavior in turbulent flow: Recent research and numerical comparison," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 426-434.
    19. Hosseini, Mirollah & Afrouzi, Hamid Hassanzadeh & Arasteh, Hossein & Toghraie, Davood, 2019. "Energy analysis of a proton exchange membrane fuel cell (PEMFC) with an open-ended anode using agglomerate model: A CFD study," Energy, Elsevier, vol. 188(C).
    20. Hadipeykani, Majid & Aghadavoudi, Farshid & Toghraie, Davood, 2020. "A molecular dynamics simulation of the glass transition temperature and volumetric thermal expansion coefficient of thermoset polymer based epoxy nanocomposite reinforced by CNT: A statistical study," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:phsmap:v:534:y:2019:i:c:s0378437119312385. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/physica-a-statistical-mechpplications/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.