IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v58y2013icp185-191.html
   My bibliography  Save this article

GTL (Gas To Liquid) and RME (Rapeseed Methyl Ester) combustion analysis in a transparent CI (compression ignition) engine by means of IR (infrared) digital imaging

Author

Listed:
  • Mancaruso, Ezio
  • Sequino, Luigi
  • Vaglieco, Bianca Maria

Abstract

In the present paper, (infrared) IR measurements were performed in order to study the behaviour of biofuels combustion in a transparent Euro 5 diesel engine operating in premixed mode. (Commercial diesel fuel) REF, (Gas To Liquid) GTL and (Rapeseed Methyl Ester) RME biofuels have been used. An elongated single-cylinder transparent engine equipped with the multi-cylinder head of commercial passenger car and (common rail) CR injection system was used. A sapphire window was set in the bottom of the combustion chamber, and a sapphire ring was placed in the upper part of the cylinder. Measurements were carried out through both accesses by means of high-speed infrared digital imaging system. IR camera was able to detect the emitted light in the wavelength range 1.5–5 μm. Infrared imaging allowed acquiring larger amount of information than UV (ultraviolet) and visible cameras. In particular the IR camera was used for the characterization of injection and combustion process. Analysing the IR images, it was possible to identify clearly the seven jets of vaporized fuel that react with air in the bowl. During the late combustion phase, the IR image showed a good capability to follow the hot burned gas both in the bowl and above the piston. The IR camera has shown high sensibility permitting to follow carefully the soot oxidation process within the cylinder. The GTL shows an advance of about 8° crank angles in the evolution of combustion process with respect to the RME. On the contrary a longer chemical activity has been detected for the latter biofuel. Finally, the IR camera was revealed very useful tool to characterize the combustion process for long time allowing high quality of the results. Images of the reactions that happen in the combustion chamber and above the piston head were clearly acquired even if the optical windows were obscured by the soot produced from the previous combustion cycles.

Suggested Citation

  • Mancaruso, Ezio & Sequino, Luigi & Vaglieco, Bianca Maria, 2013. "GTL (Gas To Liquid) and RME (Rapeseed Methyl Ester) combustion analysis in a transparent CI (compression ignition) engine by means of IR (infrared) digital imaging," Energy, Elsevier, vol. 58(C), pages 185-191.
    • Handle: RePEc:eee:energy:v:58:y:2013:i:c:p:185-191
    DOI: 10.1016/j.energy.2012.12.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544212009565
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2012.12.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mancaruso, Ezio & Vaglieco, Bianca Maria, 2012. "Premixed combustion of GTL and RME fuels in a single cylinder research engine," Applied Energy, Elsevier, vol. 91(1), pages 385-394.
    2. Benajes, Jesús & Novella, Ricardo & García, Antonio & Arthozoul, Simon, 2011. "The role of in-cylinder gas density and oxygen concentration on late spray mixing and soot oxidation processes," Energy, Elsevier, vol. 36(3), pages 1599-1611.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Theodoros C. Zannis & Roussos G. Papagiannakis & Efthimios G. Pariotis & Marios I. Kourampas, 2019. "Experimental Study of DI Diesel Engine Operational and Environmental Behavior Using Blends of City Diesel with Glycol Ethers and RME," Energies, MDPI, vol. 12(8), pages 1-36, April.
    2. Radoslaw Wrobel & Gustaw Sierzputowski & Zbigniew Sroka & Radostin Dimitrov, 2021. "Comparison of Diesel Engine Vibroacoustic Properties Powered by Bio and Standard Fuel," Energies, MDPI, vol. 14(5), pages 1-13, March.
    3. Djouadi, Amel & Bentahar, Fatiha, 2016. "Combustion study of a spark-ignition engine from pressure cycles," Energy, Elsevier, vol. 101(C), pages 211-217.
    4. Tiantian Yang & Tie Wang & Guoxing Li & Jinhong Shi & Xiuquan Sun, 2018. "Vibration Characteristics of Compression Ignition Engines Fueled with Blended Petro-Diesel and Fischer-Tropsch Diesel Fuel from Coal Fuels," Energies, MDPI, vol. 11(8), pages 1-15, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Armas, Octavio & García-Contreras, Reyes & Ramos, Ángel, 2013. "Impact of alternative fuels on performance and pollutant emissions of a light duty engine tested under the new European driving cycle," Applied Energy, Elsevier, vol. 107(C), pages 183-190.
    2. Ryu, Kyunghyun & Zacharakis-Jutz, George E. & Kong, Song-Charng, 2014. "Effects of gaseous ammonia direct injection on performance characteristics of a spark-ignition engine," Applied Energy, Elsevier, vol. 116(C), pages 206-215.
    3. Sajjad, H. & Masjuki, H.H. & Varman, M. & Kalam, M.A. & Arbab, M.I. & Imtenan, S. & Rahman, S.M. Ashrafur, 2014. "Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 961-986.
    4. Allocca, Luigi & Mancaruso, Ezio & Montanaro, Alessandro & Sequino, Luigi & Vaglieco, Bianca Maria, 2014. "Evaluation of RME (rapeseed methyl ester) and mineral diesel fuels behaviour in quiescent vessel and EURO 5 engine," Energy, Elsevier, vol. 77(C), pages 783-790.
    5. Benajes, Jesús & Molina, Santiago & Novella, Ricardo & Belarte, Eduardo, 2014. "Evaluation of massive exhaust gas recirculation and Miller cycle strategies for mixing-controlled low temperature combustion in a heavy duty diesel engine," Energy, Elsevier, vol. 71(C), pages 355-366.
    6. Kang, Yinhu & Sun, Yuming & Lu, Xiaofeng & Gou, Xiaolong & Sun, Sicong & Yan, Jin & Song, Yangfan & Zhang, Pengyuan & Wang, Quanhai & Ji, Xuanyu, 2018. "Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition," Energy, Elsevier, vol. 150(C), pages 709-721.
    7. Herreros, J.M. & Jones, A. & Sukjit, E. & Tsolakis, A., 2014. "Blending lignin-derived oxygenate in enhanced multi-component diesel fuel for improved emissions," Applied Energy, Elsevier, vol. 116(C), pages 58-65.
    8. Navarro, Emilio & Leo, Teresa J. & Corral, Roberto, 2013. "CO2 emissions from a spark ignition engine operating on natural gas–hydrogen blends (HCNG)," Applied Energy, Elsevier, vol. 101(C), pages 112-120.
    9. Paykani, Amin & Kakaee, Amir-Hasan & Rahnama, Pourya & Reitz, Rolf D., 2015. "Effects of diesel injection strategy on natural gas/diesel reactivity controlled compression ignition combustion," Energy, Elsevier, vol. 90(P1), pages 814-826.
    10. Park, Su Han & Cha, Junepyo & Lee, Chang Sik, 2012. "Impact of biodiesel in bioethanol blended diesel on the engine performance and emissions characteristics in compression ignition engine," Applied Energy, Elsevier, vol. 99(C), pages 334-343.
    11. Giakoumis, Evangelos G. & Rakopoulos, Dimitrios C. & Rakopoulos, Constantine D., 2016. "Combustion noise radiation during dynamic diesel engine operation including effects of various biofuel blends: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1099-1113.
    12. Tira, H.S. & Herreros, J.M. & Tsolakis, A. & Wyszynski, M.L., 2012. "Characteristics of LPG-diesel dual fuelled engine operated with rapeseed methyl ester and gas-to-liquid diesel fuels," Energy, Elsevier, vol. 47(1), pages 620-629.
    13. Xiao, Huahua & He, Xuechao & Duan, Qiangling & Luo, Xisheng & Sun, Jinhua, 2014. "An investigation of premixed flame propagation in a closed combustion duct with a 90° bend," Applied Energy, Elsevier, vol. 134(C), pages 248-256.
    14. Pastor, J.V. & García-Oliver, J.M. & García, A. & Micó, C. & Durrett, R., 2013. "A spectroscopy study of gasoline partially premixed compression ignition spark assisted combustion," Applied Energy, Elsevier, vol. 104(C), pages 568-575.
    15. Ameur, Houari & Bouzit, Mohamed, 2013. "Power consumption for stirring shear thinning fluids by two-blade impeller," Energy, Elsevier, vol. 50(C), pages 326-332.
    16. Ryu, Kyunghyun, 2013. "Effects of pilot injection timing on the combustion and emissions characteristics in a diesel engine using biodiesel–CNG dual fuel," Applied Energy, Elsevier, vol. 111(C), pages 721-730.
    17. Luo, Minye & Liu, Dong, 2018. "Effects of dimethyl ether addition on soot formation, evolution and characteristics in flame-wall interactions," Energy, Elsevier, vol. 164(C), pages 642-654.
    18. Ammar, M. & Chtourou, W. & Driss, Z. & Abid, M.S., 2011. "Numerical investigation of turbulent flow generated in baffled stirred vessels equipped with three different turbines in one and two-stage system," Energy, Elsevier, vol. 36(8), pages 5081-5093.
    19. Shen, Zhaojie & Liu, Zhongchang & Tian, Jing & Liu, Jiangwei, 2014. "Investigation of in-cylinder gas stratification of diesel engine during intake and compression stroke," Energy, Elsevier, vol. 72(C), pages 671-679.
    20. Molina, S. & García, A. & Pastor, J.M. & Belarte, E. & Balloul, I., 2015. "Operating range extension of RCCI combustion concept from low to full load in a heavy-duty engine," Applied Energy, Elsevier, vol. 143(C), pages 211-227.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:58:y:2013:i:c:p:185-191. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.