IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v315y2025ics0360544225001008.html
   My bibliography  Save this article

Dynamic thermal characteristics analysis of integrated space nuclear reactor with core and Stirling power conversion components

Author

Listed:
  • Zhang, Yuhao
  • Liao, Yusheng
  • Qu, Yuanshu
  • Liu, Jingwen
  • Lu, Daogang
  • Xia, Yan
  • Ou, Xuedong

Abstract

The Autonomous Circulation Miniature Integrated nuclear Reactor (ACMIR) integrates a nuclear reactor and a Stirling power system, which is of great importance for solving the electrical power demand in space. In the present work, 3D computational fluid dynamics simulations are performed on the new design of ACMIR. The dynamic mesh method is used to simulate the cyclic motion of the Stirling power system. The heat transfer effects are evaluated by analyzing the coolant flow characteristics and dynamic thermal characteristics. The results show that the coolant velocity in the same channel varies cyclically with the piston motion in the range of 0–35 m/s, which causes the temperature of the fuel, cladding and gas gap to rise and fall in the same cycle as that of the piston. The heat flux and heat transfer coefficients between the cladding surfaces and the coolant at different locations are also affected, which rise and fall with the piston in the same cycle, with a variation range of about 2500–7500 W/m2‧K. It indicates that the coolant has the ability to remove the heat from the core effectively. These phenomena provide numerical references for the safe design and development of the integrated space reactor.

Suggested Citation

  • Zhang, Yuhao & Liao, Yusheng & Qu, Yuanshu & Liu, Jingwen & Lu, Daogang & Xia, Yan & Ou, Xuedong, 2025. "Dynamic thermal characteristics analysis of integrated space nuclear reactor with core and Stirling power conversion components," Energy, Elsevier, vol. 315(C).
  • Handle: RePEc:eee:energy:v:315:y:2025:i:c:s0360544225001008
    DOI: 10.1016/j.energy.2025.134458
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225001008
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2025.134458?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ye, Wenlian & Zhang, Ting & Wang, Xiaojun & Liu, Yingwen & Chen, Pengfan, 2020. "Parametric study of gamma-type free piston stirling engine using nonlinear thermodynamic-dynamic coupled model," Energy, Elsevier, vol. 211(C).
    2. Sun, Haojie & Yu, Guoyao & Zhao, Dan & Dai, Wei & Luo, Ercang, 2023. "Thermoacoustic hysteresis of a free-piston Stirling electric generator," Energy, Elsevier, vol. 280(C).
    3. Li, Tao & Xiong, Jinbiao & Xie, Qiuxia & Chai, Xiang, 2024. "Performance analysis of heat pipe micro-reactor with Stirling engine based on full-scope multi-physics coupled simulation," Energy, Elsevier, vol. 313(C).
    4. Kuban, Lukasz & Stempka, Jakub & Tyliszczak, Artur, 2019. "A 3D-CFD study of a γ-type Stirling engine," Energy, Elsevier, vol. 169(C), pages 142-159.
    5. Rutczyk, Bartłomiej & Szczygieł, Ireneusz & Kabaj, Adam, 2020. "Evaluation of an α type stirling engine regenerator using a new differential model," Energy, Elsevier, vol. 209(C).
    6. Wang, Haitao & Chen, Yanyan & Luo, Jing & Zhang, Limin & Kang, Huifang & Luo, Ercang & Zhu, Shunmin, 2025. "A novel high-power free-piston stirling engine generator with integrated heat pipes for thermal-to-electric conversion of clean energy," Energy, Elsevier, vol. 314(C).
    7. Mohammadi, Mohammad Amin & Jafarian, Ali, 2018. "CFD simulation to investigate hydrodynamics of oscillating flow in a beta-type Stirling engine," Energy, Elsevier, vol. 153(C), pages 287-300.
    8. Chen, Pengfan & Yang, Peng & Liu, Liu & Liu, Yingwen, 2021. "Parametric investigation of the phase characteristics of a beta-type free piston Stirling engine based on a thermodynamic-dynamic coupled model," Energy, Elsevier, vol. 219(C).
    9. Xiao, Lei & Luo, Kaiqi & Hu, Jianying & Jia, Zilong & Chen, Geng & Xu, Jingyuan & Luo, Ercang, 2023. "Transient and steady performance analysis of a free-piston Stirling generator," Energy, Elsevier, vol. 273(C).
    10. Ye, Wenlian & Wang, Xiaojun & Liu, Yingwen, 2020. "Application of artificial neural network for predicting the dynamic performance of a free piston Stirling engine," Energy, Elsevier, vol. 194(C).
    11. Chen, Pengfan & Zhong, Geyu & Niu, Yafeng & Liu, Yingwen, 2022. "Performance optimization of a free piston stirling engine using multi-section regenerators based on the response surface methodology," Energy, Elsevier, vol. 261(PB).
    12. Carmela Perozziello & Lavinia Grosu & Bianca Maria Vaglieco, 2021. "Free-Piston Stirling Engine Technologies and Models: A Review," Energies, MDPI, vol. 14(21), pages 1-22, October.
    13. Masoumi, A.P. & Tavakolpour-Saleh, A.R., 2020. "Experimental assessment of damping and heat transfer coefficients in an active free piston Stirling engine using genetic algorithm," Energy, Elsevier, vol. 195(C).
    14. Zare, Sh. & Tavakolpour-Saleh, A.R., 2016. "Frequency-based design of a free piston Stirling engine using genetic algorithm," Energy, Elsevier, vol. 109(C), pages 466-480.
    15. Chi, Chunyun & Li, Ruijie & Mou, Jian & Lin, Mingqiang & Jiao, Kexin & Yang, Mingzhuo & Liu, He & Hong, Guotong, 2024. "Theoretical and experimental study of free piston Stirling generator for high cold end temperatures," Energy, Elsevier, vol. 289(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Pengfan & Zhong, Geyu & Niu, Yafeng & Liu, Yingwen, 2022. "Performance optimization of a free piston stirling engine using multi-section regenerators based on the response surface methodology," Energy, Elsevier, vol. 261(PB).
    2. Chi, Chunyun & Li, Ruijie & Mou, Jian & Lin, Mingqiang & Jiao, Kexin & Yang, Mingzhuo & Liu, He & Hong, Guotong, 2024. "Theoretical and experimental study of free piston Stirling generator for high cold end temperatures," Energy, Elsevier, vol. 289(C).
    3. Xiao, Lei & Wu, Zhanghua & Zhu, Qilu & Jia, Zilong & Zhao, Dong & Hu, Jianying & Zhu, Shunmin & Luo, Ercang, 2023. "Dynamic response of a dual-opposed free-piston Stirling generator," Energy, Elsevier, vol. 284(C).
    4. Masoumi, A.P. & Tavakolpour-Saleh, A.R. & Rahideh, A., 2020. "Applying a genetic-fuzzy control scheme to an active free piston Stirling engine: Design and experiment," Applied Energy, Elsevier, vol. 268(C).
    5. Yousefzadeh, H. & Tavakolpour-Saleh, A.R., 2021. "A novel unified dynamic-thermodynamic method for estimating damping and predicting performance of kinematic Stirling engines," Energy, Elsevier, vol. 224(C).
    6. Jiang, Han & Xi, Zhongli & A. Rahman, Anas & Zhang, Xiaoqing, 2020. "Prediction of output power with artificial neural network using extended datasets for Stirling engines," Applied Energy, Elsevier, vol. 271(C).
    7. Chen, Pengfan & Yang, Peng & Liu, Liu & Liu, Yingwen, 2021. "Parametric investigation of the phase characteristics of a beta-type free piston Stirling engine based on a thermodynamic-dynamic coupled model," Energy, Elsevier, vol. 219(C).
    8. Zare, Shahryar & Tavakolpour-Saleh, Alireza & Shourangiz-Haghighi, Alireza & Binazadeh, Tahereh, 2019. "Assessment of damping coefficients ranges in design of a free piston Stirling engine: Simulation and experiment," Energy, Elsevier, vol. 185(C), pages 633-643.
    9. Zare, Shahryar & Tavakolpour-saleh, A.R. & Aghahosseini, A. & Sangdani, M.H. & Mirshekari, Reza, 2021. "Design and optimization of Stirling engines using soft computing methods: A review," Applied Energy, Elsevier, vol. 283(C).
    10. Yajuan Wang & Kang Zhao & Jun’an Zhang, 2024. "Study on the Thermodynamic–Kinetic Coupling Characteristics of Free-Piston Stirling Air Conditioning," Energies, MDPI, vol. 17(22), pages 1-22, November.
    11. Hu, Luoke & Peng, Chen & Evans, Steve & Peng, Tao & Liu, Ying & Tang, Renzhong & Tiwari, Ashutosh, 2017. "Minimising the machining energy consumption of a machine tool by sequencing the features of a part," Energy, Elsevier, vol. 121(C), pages 292-305.
    12. Qiu, Hao & Wang, Kai & Yu, Peifeng & Ni, Mingjiang & Xiao, Gang, 2021. "A third-order numerical model and transient characterization of a β-type Stirling engine," Energy, Elsevier, vol. 222(C).
    13. Yu, Minjie & Xu, Lei & Cui, Haichuan & Liu, Zhichun & Liu, Wei, 2024. "Characteristics and potential of a novel inclined-flow stirling regenerator constructed by sinusoidal corrugated channels," Energy, Elsevier, vol. 288(C).
    14. Davide Di Battista & Roberto Cipollone, 2023. "Waste Energy Recovery and Valorization in Internal Combustion Engines for Transportation," Energies, MDPI, vol. 16(8), pages 1-28, April.
    15. Rahmati, A. & Varedi-Koulaei, S.M. & Ahmadi, M.H. & Ahmadi, H., 2022. "Dynamic synthesis of the alpha-type stirling engine based on reducing the output velocity fluctuations using Metaheuristic algorithms," Energy, Elsevier, vol. 238(PB).
    16. Ye, Wenlian & Wang, Xiaojun & Liu, Yingwen, 2020. "Application of artificial neural network for predicting the dynamic performance of a free piston Stirling engine," Energy, Elsevier, vol. 194(C).
    17. Xiao, Wang & Chen, Lei & Yu, Guoyao & Ma, Zhuang & Ma, Ying & Xue, Jianhua & Cheng, Yangbin & Luo, Ercang, 2024. "Design and experimental study of a 300 We class combustion-driven high frequency free-piston Stirling electric generator," Energy, Elsevier, vol. 300(C).
    18. Ayodeji Sowale & Edward J. Anthony & Athanasios John Kolios, 2018. "Optimisation of a Quasi-Steady Model of a Free-Piston Stirling Engine," Energies, MDPI, vol. 12(1), pages 1-17, December.
    19. Tavakolpour-Saleh, A.R. & Zare, Shahryar, 2019. "An averaging-based Lyapunov technique to design thermal oscillators: A case study on free piston Stirling engine," Energy, Elsevier, vol. 189(C).
    20. Xu, Yonghong & Tong, Liang & Zhang, Hongguang & Hou, Xiaochen & Yang, Fubin & Yu, Fei & Yang, Yuxin & Liu, Rong & Tian, Yaming & Zhao, Tenglong, 2018. "Experimental and simulation study of a free piston expander–linear generator for small-scale organic Rankine cycle," Energy, Elsevier, vol. 161(C), pages 776-791.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:315:y:2025:i:c:s0360544225001008. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.