IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v315y2025ics0360544224040763.html
   My bibliography  Save this article

Performance evaluation of SCO2 Brayton cycles for thermal protection and power generation in hypersonic vehicles

Author

Listed:
  • Luo, Qianqian
  • Luo, Lei
  • Du, Wei
  • Jia, QianKun
  • Yan, Han

Abstract

To address thermal protection and electricity demand in hypersonic vehicles, this study establishes a thermodynamic simulation platform to evaluate the performance of SCO2 regenerative (Reg.BC), recompression (Rec.BC), and turbine split flow (TS.BC). The effects of the working fluid mass flow rate (m) and split ratio (x) are analyzed for a fixed heat absorption (Qth) of 554.4 kW and Qth values ranging from 400 kW to 1900 kW. The results show that for a constant Qth, there is always a corresponding m. When the mass flow rate is below m, the Rec.BC outperforms the TS.BC, while the TS.BC performs better when m is exceeded. At Qth = 554.4 kW, m equals 3.264 kg/s. For a given Qth, optimal performance can be achieved by adjusting both m and x. In terms of cycle thermal efficiency (ηth) and cycle net output work (Wnet), the Rec.BC outperforms the TS.BC, which in turn outperforms the Reg.BC. For Wnet per unit mass, the Reg.BC is the most efficient, followed by the Rec.BC and TS.BC. Moreover, the TS.BC does not offer improvements in mitigating the issue of pinch points.

Suggested Citation

  • Luo, Qianqian & Luo, Lei & Du, Wei & Jia, QianKun & Yan, Han, 2025. "Performance evaluation of SCO2 Brayton cycles for thermal protection and power generation in hypersonic vehicles," Energy, Elsevier, vol. 315(C).
    • Handle: RePEc:eee:energy:v:315:y:2025:i:c:s0360544224040763
    DOI: 10.1016/j.energy.2024.134298
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224040763
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.134298?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Duo & Qin, Jiang & Feng, Yu & Ren, Fengzhi & Bao, Wen, 2014. "Performance evaluation of power generation system with fuel vapor turbine onboard hydrocarbon fueled scramjets," Energy, Elsevier, vol. 77(C), pages 732-741.
    2. Teja, D V Harsha & Muvvala, Pullarao & Prashanth Nittala, Noel Anurag & Bandhu, Din & Khan, M. Ijaz & Saxena, Kuldeep K. & Khan, Muhammad Imran, 2024. "Comparative performance analysis of recuperative helium and supercritical CO₂ Brayton cycles for high-temperature energy systems," Energy, Elsevier, vol. 312(C).
    3. Cheng, Kunlin & Li, Jiahui & Yu, Jianchi & Fu, Chuanjie & Qin, Jiang & Jing, Wuxing, 2023. "Novel thermoelectric generator enhanced supercritical carbon dioxide closed-Brayton-cycle power generation systems: Performance comparison and configuration optimization," Energy, Elsevier, vol. 284(C).
    4. Cheng, Kunlin & Qin, Jiang & Sun, Hongchuang & Li, Heng & He, Shuai & Zhang, Silong & Bao, Wen, 2019. "Power optimization and comparison between simple recuperated and recompressing supercritical carbon dioxide Closed-Brayton-Cycle with finite cold source on hypersonic vehicles," Energy, Elsevier, vol. 181(C), pages 1189-1201.
    5. Crespi, Francesco & Gavagnin, Giacomo & Sánchez, David & Martínez, Gonzalo S., 2017. "Supercritical carbon dioxide cycles for power generation: A review," Applied Energy, Elsevier, vol. 195(C), pages 152-183.
    6. Kim, Min Seok & Ahn, Yoonhan & Kim, Beomjoo & Lee, Jeong Ik, 2016. "Study on the supercritical CO2 power cycles for landfill gas firing gas turbine bottoming cycle," Energy, Elsevier, vol. 111(C), pages 893-909.
    7. Dang, Chaolei & Xu, Jing & Chen, Zhichao & Cheng, Kunlin & Qin, Jiang & Liu, Guodong, 2024. "Comparative study of different layouts in the closed-Brayton-cycle-based segmented cooling thermal management system for scramjets," Energy, Elsevier, vol. 301(C).
    8. Ma, Xiaofeng & Jiang, Peixue & Zhu, Yinhai, 2024. "Dynamic simulation and analysis of transient characteristics of a thermal-to-electrical conversion system based on supercritical CO2 Brayton cycle in hypersonic vehicles," Applied Energy, Elsevier, vol. 359(C).
    9. Luo, Qianqian & Li, Xingchen & Luo, Lei & Du, Wei & Yan, Han, 2024. "Multi-objective performance analysis of different SCO2 Brayton cycles on hypersonic vehicles," Energy, Elsevier, vol. 301(C).
    10. Yang, Yiping & Huang, Yulei & Jiang, Peixue & Zhu, Yinhai, 2020. "Multi-objective optimization of combined cooling, heating, and power systems with supercritical CO2 recompression Brayton cycle," Applied Energy, Elsevier, vol. 271(C).
    11. Dang, Chaolei & Cheng, Kunlin & Xu, Jing & Fan, Junhao & Qin, Jiang & Liu, Guodong, 2023. "Performance analysis of a thermal management system based on hydrocarbon-fuel regenerative cooling technology for scramjets," Energy, Elsevier, vol. 285(C).
    12. Wang, Shun-sen & Wu, Chuang & Li, Jun, 2018. "Exergoeconomic analysis and optimization of single-pressure single-stage and multi-stage CO2 transcritical power cycles for engine waste heat recovery: A comparative study," Energy, Elsevier, vol. 142(C), pages 559-577.
    13. Kim, Sunjin & Cho, Yeonjoo & Kim, Min Soo & Kim, Minsung, 2018. "Characteristics and optimization of supercritical CO2 recompression power cycle and the influence of pinch point temperature difference of recuperators," Energy, Elsevier, vol. 147(C), pages 1216-1226.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Chenghao & Cheng, Kunlin & Li, Chengjie & Xiu, Xinyan & Chen, Zhichao & Qin, Jiang, 2025. "Performance assessment of pressurized SOFC power generation system for hypersonic vehicles: Thermodynamic analysis, system configuration optimization," Energy, Elsevier, vol. 315(C).
    2. Cheng, Kunlin & Yu, Jianchi & Dang, Chaolei & Qin, Jiang & Jing, Wuxing, 2024. "Performance comparison between closed-Brayton-cycle power generation systems using supercritical carbon dioxide and helium–xenon mixture at ultra-high turbine inlet temperatures on hypersonic vehicles," Energy, Elsevier, vol. 293(C).
    3. Luo, Qianqian & Li, Xingchen & Luo, Lei & Du, Wei & Yan, Han, 2024. "Multi-objective performance analysis of different SCO2 Brayton cycles on hypersonic vehicles," Energy, Elsevier, vol. 301(C).
    4. Ma, Xiaofeng & Guo, Hao & Jiang, Peixue & Zhu, Yinhai, 2025. "Performance analysis and design optimization of a supercritical CO2 Brayton cycle cooling and power generation system coupled with a scramjet," Applied Energy, Elsevier, vol. 383(C).
    5. Liang Guo & Liping Pang & Jingquan Zhao & Xiaodong Yang, 2022. "Optimization of Power and Thermal Management System of Hypersonic Vehicle with Finite Heat Sink of Fuel," Energies, MDPI, vol. 15(15), pages 1-19, July.
    6. Zhang, Yifan & Wang, Yuan & Zhao, Yuxin, 2024. "A new thermodynamic modeling method for Brayton cycle schemes based on heat flux of the heat source," Energy, Elsevier, vol. 312(C).
    7. Olumayegun, Olumide & Wang, Meihong & Oko, Eni, 2019. "Thermodynamic performance evaluation of supercritical CO2 closed Brayton cycles for coal-fired power generation with solvent-based CO2 capture," Energy, Elsevier, vol. 166(C), pages 1074-1088.
    8. Cheng, Kunlin & Qin, Jiang & Zhang, Duo & Bao, Wen & Jing, Wuxing, 2022. "Performance evaluation for a combined power generation system of closed-Brayton-cycle and thermoelectric generator with finite cold source at room temperature on hypersonic vehicles," Energy, Elsevier, vol. 254(PC).
    9. Dang, Chaolei & Xu, Jing & Chen, Zhichao & Cheng, Kunlin & Qin, Jiang & Liu, Guodong, 2024. "Comparative study of different layouts in the closed-Brayton-cycle-based segmented cooling thermal management system for scramjets," Energy, Elsevier, vol. 301(C).
    10. Fan, Gang & Lu, Xiaochen & Chen, Kang & Zhang, Yicen & Han, Zihao & Yu, Haibin & Dai, Yiping, 2022. "Comparative analysis on design and off-design performance of novel cascade CO2 combined cycles for gas turbine waste heat utilization," Energy, Elsevier, vol. 254(PA).
    11. Son, Seongmin & Lee, Jeong Ik, 2018. "Application of adjoint sensitivity analysis method to supercritical CO2 power cycle optimization," Energy, Elsevier, vol. 147(C), pages 1153-1164.
    12. Wang, Zhe & Jiang, Yuemao & Ma, Yue & Han, Fenghui & Ji, Yulong & Cai, Wenjian, 2022. "A partial heating supercritical CO2 nested transcritical CO2 cascade power cycle for marine engine waste heat recovery: Thermodynamic, economic, and footprint analysis," Energy, Elsevier, vol. 261(PA).
    13. Feng, Jiaqi & Cui, Hongbo & Zou, Xinsong & Luo, Zhengyuan & Bai, Bofeng, 2025. "Thermo-economic comparison of three MW-scale S-CO2 recompression Brayton cycles," Energy, Elsevier, vol. 322(C).
    14. Giovanni Manente & Mário Costa, 2020. "On the Conceptual Design of Novel Supercritical CO 2 Power Cycles for Waste Heat Recovery," Energies, MDPI, vol. 13(2), pages 1-31, January.
    15. Li, Bo & Wang, Shun-sen, 2022. "Thermodynamic analysis and optimization of a hybrid cascade supercritical carbon dioxide cycle for waste heat recovery," Energy, Elsevier, vol. 259(C).
    16. Gotelip, Thiago & Gampe, Uwe & Glos, Stefan, 2022. "Optimization strategies of different SCO2 architectures for gas turbine bottoming cycle applications," Energy, Elsevier, vol. 250(C).
    17. Xu, Bin & Huang, Tianchen & Jing, Jianbin & Zhang, Chuanxia & Li, Kang & Wang, Yangliang & Ye, Taohong, 2025. "Heat flux distribution and deviation of stagnation point on blunt body under atmospheric dense environment," Energy, Elsevier, vol. 319(C).
    18. Liao, Gaoliang & E, Jiaqiang & Zhang, Feng & Chen, Jingwei & Leng, Erwei, 2020. "Advanced exergy analysis for Organic Rankine Cycle-based layout to recover waste heat of flue gas," Applied Energy, Elsevier, vol. 266(C).
    19. Dang, Chaolei & Cheng, Kunlin & Fan, Junhao & Wang, Yilin & Qin, Jiang & Liu, Guodong, 2023. "Performance analysis of fuel vapor turbine and closed-Brayton-cycle combined power generation system for hypersonic vehicles," Energy, Elsevier, vol. 266(C).
    20. Cheng, Kunlin & Xu, Jing & Dang, Chaolei & Qin, Jiang & Jing, Wuxing, 2022. "Performance evaluation of fuel indirect cooling based thermal management system using liquid metal for hydrocarbon-fueled scramjet," Energy, Elsevier, vol. 260(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:315:y:2025:i:c:s0360544224040763. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.