IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v313y2024ics0360544224036697.html

Production and utilization of diesel-equivalent renewable fuels from waste cooking oil and low-density polyethylene: Experimental investigation on performance, combustion, and emission characteristics

Author

Listed:
  • Sasidhar, K.B.
  • Yesuraj, K.
  • Somasundaram, Murugavelh
  • Antunes, Elsa

Abstract

Diesel-equivalent fuel from waste cooking oil (WCO) and low-density polyethylene (LDPE), were produced and used in this study to replace 10 %, 20 %, and 30 % of commercial diesel fuel (B10, B20, and B30 respectively). A maximum in-cylinder pressure of 69.85 and 68.55 bars was observed for the B30 blends compared to 68.92 bar for diesel. Similarly, maximum heat release of 39.64 and 38.78 J°CA−1 was observed for the B30 blends and 37.09 J°CA−1 for diesel. Similarly, the rate of pressure rise, combustion duration, cumulative heat release rate, and mass fraction burned were also comparable with that of conventional diesel fuel at all fuel blends. The performance of the fuel blends in the compression ignition engine was also comparable with diesel. However, an 8.5 % reduction in brake thermal efficiency was observed for the B30 blends. Similarly 16 % more fuel consumption was observed for the B30 blends owing to higher fractions of long-chain hydrocarbons in the fuel. The emissions in terms of carbon monoxide, nitrogen oxides, and carbon dioxide were alike for diesel and other fuel blends. Hence, the pyrolyzed oils can replace up to 30 % of commercial diesel and upon further purification, higher fractions of diesel can be replaced.

Suggested Citation

  • Sasidhar, K.B. & Yesuraj, K. & Somasundaram, Murugavelh & Antunes, Elsa, 2024. "Production and utilization of diesel-equivalent renewable fuels from waste cooking oil and low-density polyethylene: Experimental investigation on performance, combustion, and emission characteristics," Energy, Elsevier, vol. 313(C).
    • Handle: RePEc:eee:energy:v:313:y:2024:i:c:s0360544224036697
    DOI: 10.1016/j.energy.2024.133891
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224036697
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.133891?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Ben Hassen Trabelsi, Aïda & Zaafouri, Kaouther & Baghdadi, Withek & Naoui, Slim & Ouerghi, Aymen, 2018. "Second generation biofuels production from waste cooking oil via pyrolysis process," Renewable Energy, Elsevier, vol. 126(C), pages 888-896.
    2. Kumar, R. Sathish & Sivakumar, S. & Joshuva, A. & Deenadayalan, G. & Vishnuvardhan, R., 2021. "Bio-fuel production from Martynia annua L. seeds using slow pyrolysis reactor and its effects on diesel engine performance, combustion and emission characteristics," Energy, Elsevier, vol. 217(C).
    3. E, Jiaqiang & Pham, Minhhieu & Zhao, D. & Deng, Yuanwang & Le, DucHieu & Zuo, Wei & Zhu, Hao & Liu, Teng & Peng, Qingguo & Zhang, Zhiqing, 2017. "Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 620-647.
    4. Januszewicz, Katarzyna & Hunicz, Jacek & Kazimierski, Paweł & Rybak, Arkadiusz & Suchocki, Tomasz & Duda, Kamil & Mikulski, Maciej, 2023. "An experimental assessment on a diesel engine powered by blends of waste-plastic-derived pyrolysis oil with diesel," Energy, Elsevier, vol. 281(C).
    5. Gad, M.S. & Abu-Elyazeed, O.S. & Mohamed, M.A. & Hashim, A.M., 2021. "Effect of oil blends derived from catalytic pyrolysis of waste cooking oil on diesel engine performance, emissions and combustion characteristics," Energy, Elsevier, vol. 223(C).
    6. Senthur Prabu, S. & Asokan, M.A. & Roy, Rahul & Francis, Steff & Sreelekh, M.K., 2017. "Performance, combustion and emission characteristics of diesel engine fuelled with waste cooking oil bio-diesel/diesel blends with additives," Energy, Elsevier, vol. 122(C), pages 638-648.
    7. Paneerselvam, Purushothaman & Panithasan, Mebin Samuel & Venkadesan, Gnanamoorthi, 2024. "RSM optimization of ultrasound-assisted melia dubia oil extraction with green solvents and their suitability for diesel engine applications," Renewable Energy, Elsevier, vol. 222(C).
    8. Aqian Li & Zhaolei Zheng, 2020. "Effect of Spark Ignition Timing and Water Injection Temperature on the Knock Combustion of a GDI Engine," Energies, MDPI, vol. 13(18), pages 1-24, September.
    9. Lam, Su Shiung & Wan Mahari, Wan Adibah & Ok, Yong Sik & Peng, Wanxi & Chong, Cheng Tung & Ma, Nyuk Ling & Chase, Howard A. & Liew, Zhenling & Yusup, Suzana & Kwon, Eilhann E. & Tsang, Daniel C.W., 2019. "Microwave vacuum pyrolysis of waste plastic and used cooking oil for simultaneous waste reduction and sustainable energy conversion: Recovery of cleaner liquid fuel and techno-economic analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 115(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wan Mahari, Wan Adibah & Kee, Seng Hon & Foong, Shin Ying & Amelia, Tan Suet May & Bhubalan, Kesaven & Man, Mustafa & Yang, YaFeng & Ong, Hwai Chyuan & Vithanage, Meththika & Lam, Su Shiung & Sonne, C, 2022. "Generating alternative fuel and bioplastics from medical plastic waste and waste frying oil using microwave co-pyrolysis combined with microbial fermentation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    2. Bayramoğlu, Kubilay & Bayramoğlu, Tolga & Polat, Fikret & Sarıdemir, Suat & Alçelik, Necdet & Ağbulut, Ümit, 2025. "Energy, exergy, and emission (3E) analysis of hydrogen-enriched waste biodiesel-diesel fuel blends on an indirect injection dual-fuel CI engine," Energy, Elsevier, vol. 314(C).
    3. Siva Krishna Reddy Dwarshala & Siva Subramaniam Rajakumar & Obula Reddy Kummitha & Elumalai Perumal Venkatesan & Ibham Veza & Olusegun David Samuel, 2023. "A Review on Recent Developments of RCCI Engines Operated with Alternative Fuels," Energies, MDPI, vol. 16(7), pages 1-27, April.
    4. Asokan, M.A. & Senthur Prabu, S. & Bade, Pushpa Kiran Kumar & Nekkanti, Venkata Mukesh & Gutta, Sri Sai Gopal, 2019. "Performance, combustion and emission characteristics of juliflora biodiesel fuelled DI diesel engine," Energy, Elsevier, vol. 173(C), pages 883-892.
    5. Liu, Teng & E, Jiaqiang & Yang, W.M. & Deng, Yuangwang & An, H. & Zhang, Zhiqing & Pham, Minhhieu, 2018. "Investigation on the applicability for reaction rates adjustment of the optimized biodiesel skeletal mechanism," Energy, Elsevier, vol. 150(C), pages 1031-1038.
    6. Ayhan, Vezir & Ece, Yılmaz Mert, 2020. "New application to reduce NOx emissions of diesel engines: Electronically controlled direct water injection at compression stroke," Applied Energy, Elsevier, vol. 260(C).
    7. E, Jiaqiang & Pham, MinhHieu & Deng, Yuanwang & Nguyen, Tuannghia & Duy, VinhNguyen & Le, DucHieu & Zuo, Wei & Peng, Qingguo & Zhang, Zhiqing, 2018. "Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends," Energy, Elsevier, vol. 149(C), pages 979-989.
    8. Liu, Yang & Cheng, Xiaobei & Qin, Longjiang & Wang, Xin & Yao, Junjie & Wu, Hui, 2020. "Experimental investigation on soot formation characteristics of n-heptane/butanol isomers blends in laminar diffusion flames," Energy, Elsevier, vol. 211(C).
    9. Wang, Jia & Jiang, Jianchun & Li, Dongxian & Meng, Xianzhi & Zhan, Guowu & Wang, Yunpu & Zhang, Aihua & Sun, Yunjuan & Ruan, Roger & Ragauskas, Arthur J., 2022. "Creating values from wastes: Producing biofuels from waste cooking oil via a tandem vapor-phase hydrotreating process," Applied Energy, Elsevier, vol. 323(C).
    10. Muthukumar, K. & Kasiraman, G., 2024. "Utilization of fuel energy from single-use Low-density polyethylene plastic waste on CI engine with hydrogen enrichment – An experimental study," Energy, Elsevier, vol. 289(C).
    11. Ge, Shengbo & Yek, Peter Nai Yuh & Cheng, Yoke Wang & Xia, Changlei & Wan Mahari, Wan Adibah & Liew, Rock Keey & Peng, Wanxi & Yuan, Tong-Qi & Tabatabaei, Meisam & Aghbashlo, Mortaza & Sonne, Christia, 2021. "Progress in microwave pyrolysis conversion of agricultural waste to value-added biofuels: A batch to continuous approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    12. Jiang, Yuchen & Li, Xianglin & Li, Chao & Zhang, Lijun & Zhang, Shu & Li, Bin & Wang, Shuang & Hu, Xun, 2022. "Pyrolysis of typical plastics and coupled with steam reforming of their derived volatiles for simultaneous production of hydrogen-rich gases and heavy organics," Renewable Energy, Elsevier, vol. 200(C), pages 476-491.
    13. Zhang, Huiming & Zheng, Yu & Cao, Jie & Qiu, Yueming, 2017. "Has government intervention effectively encouraged the use of waste cooking oil as an energy source? Comparison of two Chinese biofuel companies," Energy, Elsevier, vol. 140(P1), pages 708-715.
    14. Fan, Liangliang & Liu, Lei & Xiao, Zhiguo & Su, Zheyang & Huang, Pei & Peng, Hongyu & Lv, Sen & Jiang, Haiwei & Ruan, Roger & Chen, Paul & Zhou, Wenguang, 2021. "Comparative study of continuous-stirred and batch microwave pyrolysis of linear low-density polyethylene in the presence/absence of HZSM-5," Energy, Elsevier, vol. 228(C).
    15. Sultana, Ayesha & Alam, Md. Mehebub & Ghosh, Sujoy Kumar & Middya, Tapas Ranjan & Mandal, Dipankar, 2019. "Energy harvesting and self-powered microphone application on multifunctional inorganic-organic hybrid nanogenerator," Energy, Elsevier, vol. 166(C), pages 963-971.
    16. Hunicz, Jacek & Rybak, Arkadiusz & Szpica, Dariusz & Gęca, Michał S. & Woś, Paweł & Yang, Liping & Mikulski, Maciej, 2024. "Waste plastic pyrolysis oils as diesel fuel blending components: Detailed analysis of combustion and emissions sensitivity to engine control parameters," Energy, Elsevier, vol. 313(C).
    17. Arnob Das & Susmita Datta Peu, 2022. "A Comprehensive Review on Recent Advancements in Thermochemical Processes for Clean Hydrogen Production to Decarbonize the Energy Sector," Sustainability, MDPI, vol. 14(18), pages 1-42, September.
    18. El-Seesy, Ahmed I. & Hassan, Hamdy & Ookawara, S., 2018. "Effects of graphene nanoplatelet addition to jatropha Biodiesel–Diesel mixture on the performance and emission characteristics of a diesel engine," Energy, Elsevier, vol. 147(C), pages 1129-1152.
    19. Boopathi, D. & Thiyagarajan, S. & Edwin Geo, V. & Madhankumar, S. & Gheith, R., 2018. "Effect of geraniol on performance, emission and combustion characteristics of CI engine fuelled with gutter oil obtained from different sources," Energy, Elsevier, vol. 157(C), pages 391-401.
    20. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:313:y:2024:i:c:s0360544224036697. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.