IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223022703.html
   My bibliography  Save this article

Droplet characteristics of multi-plume flash boiling spray evaluation using SLIPI-LIEF/Mie planar imaging technique

Author

Listed:
  • Qiu, Shuyi
  • Yao, Bowei
  • Wang, Shangning
  • Zhang, Weixuan
  • Hung, David L.S.
  • Xu, Min
  • Li, Xuesong

Abstract

Flash boiling atomization is a promising approach whose primary breakup heavily relies on the phase change inside the nozzle. Droplet size measurement is crucial for fundamental studies of flash boiling sprays. However, the interference of the vapor phase and multiple scatterings in droplet-dense regions notably impact the accuracy of spray droplet size measurement. In this work, we utilized a three-phase structured laser illumination planar imaging, laser-induced exciplex fluorescence/Mie scattering (3p-SLIPI-LIEF/Mie) method in evaluating the droplet size distribution for a two-hole fuel injector and an ECN Spray G injector. The SMD characteristics of the fuel spray under various temperature and pressure boundary conditions were examined, and flash boiling spray collapse conditions were emphasized. The results show that the proposed SLIPI-LIEF/Mie method is superior to PDI techniques in providing more comprehensive results while maintaining satisfactory accuracy. The SLIPI-LIEF/Mie results show that the near-field plume expansion and SMD distribution strongly correlate with the flash boiling phase transition process. The droplet in the collapsed region was larger than that in the primary plume regions. However, whether or not the spray collapses, the SMD of the spray reduces as the fuel temperature increases, ambient pressure decreases, and injection pressure increases.

Suggested Citation

  • Qiu, Shuyi & Yao, Bowei & Wang, Shangning & Zhang, Weixuan & Hung, David L.S. & Xu, Min & Li, Xuesong, 2023. "Droplet characteristics of multi-plume flash boiling spray evaluation using SLIPI-LIEF/Mie planar imaging technique," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223022703
    DOI: 10.1016/j.energy.2023.128876
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223022703
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128876?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kapusta, Łukasz Jan, 2022. "Understanding the collapse of flash-boiling sprays formed by multi-hole injectors operating at low injection pressures," Energy, Elsevier, vol. 247(C).
    2. Wang, Ziman & Badawy, Tawfik & Wang, Bo & Jiang, Yizhou & Xu, Hongming, 2017. "Experimental characterization of closely coupled split isooctane sprays under flash boiling conditions," Applied Energy, Elsevier, vol. 193(C), pages 199-209.
    3. Wang, Ziman & Jiang, Changzhao & Xu, Hongming & Badawy, Tawfik & Wang, Bo & Jiang, Yizhou, 2017. "The influence of flash boiling conditions on spray characteristics with closely coupled split injection strategy," Applied Energy, Elsevier, vol. 187(C), pages 523-533.
    4. Chang, Mengzhao & Kim, Huijun & Zhou, Bo & Park, Suhan, 2023. "Spray collapse resistance of GDI injectors with different hole structures under flash boiling conditions," Energy, Elsevier, vol. 268(C).
    5. Daho, Tizane & Vaitilingom, Gilles & Ouiminga, Salifou K. & Piriou, Bruno & Zongo, Augustin S. & Ouoba, Samuel & Koulidiati, Jean, 2013. "Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel," Applied Energy, Elsevier, vol. 111(C), pages 1046-1053.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kaźmierski, Bartosz & Kapusta, Łukasz Jan, 2023. "The importance of individual spray properties in performance improvement of a urea-SCR system employing flash-boiling injection," Applied Energy, Elsevier, vol. 329(C).
    2. Bora, Plaban & Konwar, Lakhya Jyoti & Boro, Jutika & Phukan, Mayur Mausoom & Deka, Dhanapati & Konwar, Bolin Kumar, 2014. "Hybrid biofuels from non-edible oils: A comparative standpoint with corresponding biodiesel," Applied Energy, Elsevier, vol. 135(C), pages 450-460.
    3. Wang, Ziman & Guo, Hengjie & Wang, Chongming & Xu, Hongming & Li, Yanfei, 2017. "Microscopic level study on the spray impingement process and characteristics," Applied Energy, Elsevier, vol. 197(C), pages 114-123.
    4. Yuan, Xingzhong & Ding, Xiaowei & Leng, Lijian & Li, Hui & Shao, Jianguang & Qian, Yingying & Huang, Huajun & Chen, Xiaohong & Zeng, Guangming, 2018. "Applications of bio-oil-based emulsions in a DI diesel engine: The effects of bio-oil compositions on engine performance and emissions," Energy, Elsevier, vol. 154(C), pages 110-118.
    5. Shu, Jun & Fu, Jianqin & Liu, Jingping & Ma, Yinjie & Wang, Shuqian & Deng, Banglin & Zeng, Dongjian, 2019. "Effects of injector spray angle on combustion and emissions characteristics of a natural gas (NG)-diesel dual fuel engine based on CFD coupled with reduced chemical kinetic model," Applied Energy, Elsevier, vol. 233, pages 182-195.
    6. Ismael, Mhadi A. & Heikal, Morgan R. & Aziz, A. Rashid A. & Syah, Firman & Zainal A., Ezrann Z. & Crua, Cyril, 2018. "The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions," Applied Energy, Elsevier, vol. 222(C), pages 762-771.
    7. Singh, Thokchom Subhaschandra & Verma, Tikendra Nath, 2019. "Biodiesel production from Momordica Charantia (L.): Extraction and engine characteristics," Energy, Elsevier, vol. 189(C).
    8. Asgari, Behrad & Amani, Ehsan, 2017. "A multi-objective CFD optimization of liquid fuel spray injection in dry-low-emission gas-turbine combustors," Applied Energy, Elsevier, vol. 203(C), pages 696-710.
    9. Aldhaidhawi, Mohanad & Chiriac, Radu & Badescu, Viorel, 2017. "Ignition delay, combustion and emission characteristics of Diesel engine fueled with rapeseed biodiesel – A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 178-186.
    10. Xinda Zhu & Manu Mannazhi & Natascia Palazzo & Per-Erik Bengtsson & Öivind Andersson, 2020. "High-Speed Imaging of Spray Formation and Combustion in an Optical Engine: Effects of Injector Aging and TPGME as a Fuel Additive," Energies, MDPI, vol. 13(12), pages 1-26, June.
    11. Dawei Chen & Wangqiang Niu & Wei Gu & Nigel Schofield, 2019. "Game-Based Energy Management Method for Hybrid RTG Cranes," Energies, MDPI, vol. 12(18), pages 1-23, September.
    12. Tsuanyo, David & Azoumah, Yao & Aussel, Didier & Neveu, Pierre, 2015. "Modeling and optimization of batteryless hybrid PV (photovoltaic)/Diesel systems for off-grid applications," Energy, Elsevier, vol. 86(C), pages 152-163.
    13. Meng Ji & Zhijun Wu & Alessandro Ferrari & Lezhong Fu & Oscar Vento, 2023. "Experimental Investigation on Gasoline—Water Mixture Fuel Impingement Preparation Method and Spray Characteristics with High Injection Temperatures and Pressures," Energies, MDPI, vol. 16(16), pages 1-16, August.
    14. Zhou, Yifan & Wei, Zhenhong & Zhu, Qitian & Cao, Yang & Zhang, Yuyin, 2022. "Quantitative characterization on cyclic variation of mixture formation for flash boiling sprays," Energy, Elsevier, vol. 257(C).
    15. Capuano, D. & Costa, M. & Di Fraia, S. & Massarotti, N. & Vanoli, L., 2017. "Direct use of waste vegetable oil in internal combustion engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 759-770.
    16. Han, Taehoon & Singh, Ripudaman & Lavoie, George & Wooldridge, Margaret & Boehman, André, 2020. "Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines," Applied Energy, Elsevier, vol. 262(C).
    17. Zhang, Wenbin & Zhang, Zhou & Ma, Xiao & Awad, Omar I. & Li, Yanfei & Shuai, Shijin & Xu, Hongming, 2020. "Impact of injector tip deposits on gasoline direct injection engine combustion, fuel economy and emissions," Applied Energy, Elsevier, vol. 262(C).
    18. Wang, Zhaowen & Yuan, Bo & Cao, Junhui & Huang, Yuhan & Cheng, Xiaobei & Wang, Yuzhou & Zhang, Xinhua & Liu, Hao, 2022. "A new shift mechanism for micro-explosion of water-diesel emulsion droplets at different ambient temperatures," Applied Energy, Elsevier, vol. 323(C).
    19. Zhang, Jibao & Zhang, Xin & Wang, Tao & Hou, Xiaosen, 2019. "A numerical study on jet characteristics under different supercritical conditions for engine applications," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    20. Chang, Mengzhao & Kim, Huijun & Zhou, Bo & Park, Suhan, 2023. "Spray collapse resistance of GDI injectors with different hole structures under flash boiling conditions," Energy, Elsevier, vol. 268(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223022703. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.