IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v268y2023ics036054422300083x.html
   My bibliography  Save this article

Spray collapse resistance of GDI injectors with different hole structures under flash boiling conditions

Author

Listed:
  • Chang, Mengzhao
  • Kim, Huijun
  • Zhou, Bo
  • Park, Suhan

Abstract

The purpose of this study was to compare the spray collapse resistance and explore the spray collapse mechanism of GDI injectors with different hole structures to provide a theoretical basis for the optimal design of injectors in addition to the clean combustion of internal combustion engines. Herein, a shadowgraph visualization system was used to record the macroscopic spray of the different injectors, with MATLAB used to obtain quantitative data from the spray images. The effects of hole length-to-diameter (L/D), hole shape, and step hole diameter (Ds) on the spray collapse characteristics were analyzed quantitatively. Finally, the nozzle near-field spray of the injectors and the pressure distribution below the injectors were simulated using CFD to analyze the spray collapse mechanism. The results indicated that an increase in L/D did significantly affect collapse point (the superheat degree at the onset of spray collapse). Among the injectors with straight, reverse taper, tapered and tapered step holes, the collapse point of the tapered step injector is about 10 °C lower than that of other injectors. Among the three structural features of the injector holes, the step hole diameter had the greatest influence on the spray collapse point. By reducing step hole diameter, the spray collapse point was delayed by approximately 22 °C, because under flash boiling conditions, the expanded spray plume occupies almost the entire space of the step hole. A small step-hole diameter limits the expansion of spray plumes and the interaction between them, thus improving the resistance of the spray to collapse.

Suggested Citation

  • Chang, Mengzhao & Kim, Huijun & Zhou, Bo & Park, Suhan, 2023. "Spray collapse resistance of GDI injectors with different hole structures under flash boiling conditions," Energy, Elsevier, vol. 268(C).
    • Handle: RePEc:eee:energy:v:268:y:2023:i:c:s036054422300083x
    DOI: 10.1016/j.energy.2023.126689
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422300083X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.126689?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kapusta, Łukasz Jan, 2022. "Understanding the collapse of flash-boiling sprays formed by multi-hole injectors operating at low injection pressures," Energy, Elsevier, vol. 247(C).
    2. Jiang, Changzhao & Parker, Matthew C. & Butcher, Daniel & Spencer, Adrian & Garner, Colin P. & Helie, Jerome, 2019. "Comparison of flash boiling resistance of two injector designs and the consequences on downsized gasoline engine emissions," Applied Energy, Elsevier, vol. 254(C).
    3. Chu, Huaqiang & Han, Weiwei & Cao, Wenjian & Gu, Mingyan & Xu, Guangju, 2019. "Effect of methane addition to ethylene on the morphology and size distribution of soot in a laminar co-flow diffusion flame," Energy, Elsevier, vol. 166(C), pages 392-400.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Qiu, Shuyi & Yao, Bowei & Wang, Shangning & Zhang, Weixuan & Hung, David L.S. & Xu, Min & Li, Xuesong, 2023. "Droplet characteristics of multi-plume flash boiling spray evaluation using SLIPI-LIEF/Mie planar imaging technique," Energy, Elsevier, vol. 282(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chang, Mengzhao & Park, Suhan, 2023. "Predictions and analysis of flash boiling spray characteristics of gasoline direct injection injectors based on optimized machine learning algorithm," Energy, Elsevier, vol. 262(PA).
    2. Liu, Yang & Cheng, Xiaobei & Qin, Longjiang & Wang, Xin & Yao, Junjie & Wu, Hui, 2020. "Experimental investigation on soot formation characteristics of n-heptane/butanol isomers blends in laminar diffusion flames," Energy, Elsevier, vol. 211(C).
    3. Chen, Zhijie & Zuo, Wei & Zhou, Kun & Li, Qingqing & Huang, Yuhan & E, Jiaqiang, 2023. "Multi-factor impact mechanism on the performance of high temperature proton exchange membrane fuel cell," Energy, Elsevier, vol. 278(PB).
    4. Zhang, Zhiqing & Li, Jiangtao & Tian, Jie & Dong, Rui & Zou, Zhi & Gao, Sheng & Tan, Dongli, 2022. "Performance, combustion and emission characteristics investigations on a diesel engine fueled with diesel/ ethanol /n-butanol blends," Energy, Elsevier, vol. 249(C).
    5. Deng, Yuanwang & Ying, Hejie & E, Jiaqiang & Zhu, Hao & Wei, Kexiang & Chen, Jingwei & Zhang, Feng & Liao, Gaoliang, 2019. "Feature parameter extraction and intelligent estimation of the State-of-Health of lithium-ion batteries," Energy, Elsevier, vol. 176(C), pages 91-102.
    6. Peng, Qingguo & Wu, Yifeng & E, Jiaqiang & Yang, Wenming & Xu, Hongpeng & Li, Zhenwei, 2019. "Combustion characteristics and thermal performance of premixed hydrogen-air in a two-rearward-step micro tube," Applied Energy, Elsevier, vol. 242(C), pages 424-438.
    7. Li, Dexin & Zuo, Wei & Li, Qingqing & Zhang, Guangde & Zhou, Kun & E, Jiaqiang, 2023. "Effects of pulsating flow on the performance of multi-channel cold plate for thermal management of lithium-ion battery pack," Energy, Elsevier, vol. 273(C).
    8. Meng Ji & Zhijun Wu & Alessandro Ferrari & Lezhong Fu & Oscar Vento, 2023. "Experimental Investigation on Gasoline—Water Mixture Fuel Impingement Preparation Method and Spray Characteristics with High Injection Temperatures and Pressures," Energies, MDPI, vol. 16(16), pages 1-16, August.
    9. Hua, Yang & Qian, Yejian & Meng, Shun, 2023. "PAH laser diagnostics and soot particle dynamics in gasoline co-flow flames doped with n-butanol," Energy, Elsevier, vol. 272(C).
    10. Zhou, Yifan & Wei, Zhenhong & Zhu, Qitian & Cao, Yang & Zhang, Yuyin, 2022. "Quantitative characterization on cyclic variation of mixture formation for flash boiling sprays," Energy, Elsevier, vol. 257(C).
    11. Kapusta, Łukasz Jan, 2022. "Understanding the collapse of flash-boiling sprays formed by multi-hole injectors operating at low injection pressures," Energy, Elsevier, vol. 247(C).
    12. Hai-Peng Zhang & Jing-Jing Cao & Wen-Bing Jiang & Yu-Qi Yang & Bo-Yuan Zhu & Xiao-Yu Liu & Yang Wu & Xin Sun & Ariane Felicite Bibiche Essouma Essouma & Jian Liu & Ting-Yan Xing, 2022. "Synthesis and Mechanical Properties of Polyacrylamide Gel Doped with Graphene Oxide," Energies, MDPI, vol. 15(15), pages 1-20, August.
    13. E, Jiaqiang & Liu, Guanlin & Zhang, Zhiqing & Han, Dandan & Chen, Jingwei & Wei, Kexiang & Gong, Jinke & Yin, Zibin, 2019. "Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model," Applied Energy, Elsevier, vol. 243(C), pages 321-335.
    14. Kaźmierski, Bartosz & Kapusta, Łukasz Jan, 2023. "The importance of individual spray properties in performance improvement of a urea-SCR system employing flash-boiling injection," Applied Energy, Elsevier, vol. 329(C).
    15. Zhang, Yanzhi & Xu, Leilei & Zhu, Yizi & Xu, Shijie & Bai, Xue-Song, 2023. "Numerical study on liquid ammonia direct injection spray characteristics under engine-relevant conditions," Applied Energy, Elsevier, vol. 334(C).
    16. Peng, Qingguo & Jiaqiang, E & Yang, W.M. & Xu, Hongpeng & Chen, Jingwei & Zhang, Feng & Meng, Tian & Qiu, Runzhi, 2019. "Experimental and numerical investigation of a micro-thermophotovoltaic system with different backward-facing steps and wall thicknesses," Energy, Elsevier, vol. 173(C), pages 540-547.
    17. Qiu, Shuyi & Yao, Bowei & Wang, Shangning & Zhang, Weixuan & Hung, David L.S. & Xu, Min & Li, Xuesong, 2023. "Droplet characteristics of multi-plume flash boiling spray evaluation using SLIPI-LIEF/Mie planar imaging technique," Energy, Elsevier, vol. 282(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:268:y:2023:i:c:s036054422300083x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.