IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223016997.html
   My bibliography  Save this article

Analyzing characteristic and modeling of high-temperature proton exchange membrane fuel cells with CO poisoning effect

Author

Listed:
  • Lei, Gang
  • Zheng, Hualin
  • Zhang, Jun
  • Siong Chin, Cheng
  • Xu, Xinhai
  • Zhou, Weijiang
  • Zhang, Caizhi

Abstract

High-temperature proton exchange membrane fuel cells (HT-PEMFC) have strong resistance to CO poisoning. However, the published CO poisoning models for HT-PEMFC are based on the finite element analysis method, which are difficult to use for the performance prediction and development of system control strategies due to a large amount of calculation. In the beginning, a semi-empirical model of HT-PEMFC is deduced based on the analysis of the CO poisoning characteristics. Then the key parameters of ohmic impedance and concentration polarization advance correction factor are obtained by fitting the polarization curves, dissociation and adsorption activation energy of H2 and CO are obtained by the calculation, respectively. The slope of the straight line segment in the ohmic polarization interval of the polarization curve is linearly related to ln[H2/CO]. The change of limiting current density is the main factor for the advance of concentration polarization. The fitted ohmic impedance varies with temperature and CO concentration, but changes little above 175 °C. CO coverage depends primarily on dissociation and adsorption activation energy of CO. Subsequently, the proposed model is validated with experimental data and shows high similarity. The model can be used for studying the systematic control strategy development and performance monitoring of HT-PEMFC.

Suggested Citation

  • Lei, Gang & Zheng, Hualin & Zhang, Jun & Siong Chin, Cheng & Xu, Xinhai & Zhou, Weijiang & Zhang, Caizhi, 2023. "Analyzing characteristic and modeling of high-temperature proton exchange membrane fuel cells with CO poisoning effect," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223016997
    DOI: 10.1016/j.energy.2023.128305
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223016997
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128305?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Steinberger, Michael & Geiling, Johannes & Oechsner, Richard & Frey, Lothar, 2018. "Anode recirculation and purge strategies for PEM fuel cell operation with diluted hydrogen feed gas," Applied Energy, Elsevier, vol. 232(C), pages 572-582.
    2. Cai, Wei & Mohammaditab, Rasoul & Fathi, Gholamreza & Wakil, Karzan & Ebadi, Abdol Ghaffar & Ghadimi, Noradin, 2019. "Optimal bidding and offering strategies of compressed air energy storage: A hybrid robust-stochastic approach," Renewable Energy, Elsevier, vol. 143(C), pages 1-8.
    3. Chen, Ben & Ke, Wandi & Luo, Maji & Wang, Jun & Tu, Zhengkai & Pan, Mu & Zhang, Haining & Liu, Xiaowei & Liu, Wei, 2015. "Operation characteristics and carbon corrosion of PEMFC (Proton exchange membrane fuel cell) with dead-ended anode for high hydrogen utilization," Energy, Elsevier, vol. 91(C), pages 799-806.
    4. Wu, Zhen & Zhu, Pengfei & Yao, Jing & Tan, Peng & Xu, Haoran & Chen, Bin & Yang, Fusheng & Zhang, Zaoxiao & Ni, Meng, 2020. "Thermo-economic modeling and analysis of an NG-fueled SOFC-WGS-TSA-PEMFC hybrid energy conversion system for stationary electricity power generation," Energy, Elsevier, vol. 192(C).
    5. Authayanun, Suthida & Saebea, Dang & Patcharavorachot, Yaneeporn & Arpornwichanop, Amornchai, 2014. "Effect of different fuel options on performance of high-temperature PEMFC (proton exchange membrane fuel cell) systems," Energy, Elsevier, vol. 68(C), pages 989-997.
    6. Lu, Xiaohui & Li, Bing & Guo, Lin & Wang, Peifang & Yousefi, Nasser, 2021. "Exergy analysis of a polymer fuel cell and identification of its optimum operating conditions using improved Farmland Fertility Optimization," Energy, Elsevier, vol. 216(C).
    7. Abdollahzadeh, M. & Ribeirinha, P. & Boaventura, M. & Mendes, A., 2018. "Three-dimensional modeling of PEMFC with contaminated anode fuel," Energy, Elsevier, vol. 152(C), pages 939-959.
    8. Blal, Mohamed & Benatiallah, Ali & NeÇaibia, Ammar & Lachtar, Salah & Sahouane, Nordine & Belasri, Ahmed, 2019. "Contribution and investigation to compare models parameters of (PEMFC), comprehensives review of fuel cell models and their degradation," Energy, Elsevier, vol. 168(C), pages 182-199.
    9. Ribeirinha, P. & Abdollahzadeh, M. & Sousa, J.M. & Boaventura, M. & Mendes, A., 2017. "Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell," Applied Energy, Elsevier, vol. 202(C), pages 6-19.
    10. Ryu, Sung Kwan & Vinothkannan, Mohanraj & Kim, Ae Rhan & Yoo, Dong Jin, 2022. "Effect of type and stoichiometry of fuels on performance of polybenzimidazole-based proton exchange membrane fuel cells operating at the temperature range of 120–160 °C," Energy, Elsevier, vol. 238(PB).
    11. Bornapour, Mosayeb & Hooshmand, Rahmat-Allah & Parastegari, Moein, 2019. "An efficient scenario-based stochastic programming method for optimal scheduling of CHP-PEMFC, WT, PV and hydrogen storage units in micro grids," Renewable Energy, Elsevier, vol. 130(C), pages 1049-1066.
    12. Guo, Xinru & Zhang, Houcheng & Wang, Jiatang & Zhao, Jiapei & Wang, Fu & Miao, He & Yuan, Jinliang & Hou, Shujin, 2020. "A new hybrid system composed of high-temperature proton exchange fuel cell and two-stage thermoelectric generator with Thomson effect: Energy and exergy analyses," Energy, Elsevier, vol. 195(C).
    13. Wang, Hsueh-Sheng & Chang, Cheng-Ping & Huang, Yuh-Jeen & Su, Yu-Chuan & Tseng, Fan-Gang, 2017. "A high-yield and ultra-low-temperature methanol reformer integratable with phosphoric acid fuel cell (PAFC)," Energy, Elsevier, vol. 133(C), pages 1142-1152.
    14. Lopes, Daniel G. & da Silva, E.P. & Pinto, C.S. & Neves, N.P. & Camargo, J.C. & Ferreira, P.F.P. & Furlan, A.L. & Lopes, Davi G., 2012. "Technical and economic analysis of a power supply system based on ethanol reforming and PEMFC," Renewable Energy, Elsevier, vol. 45(C), pages 205-212.
    15. Inamuddin, & Cheema, Taqi Ahmad & Zaidi, S.M.J. & Rahman, S.U., 2011. "Three dimensional numerical investigations for the effects of gas diffusion layer on PEM fuel cell performance," Renewable Energy, Elsevier, vol. 36(2), pages 529-535.
    16. Liu, Zhiyang & Chen, Jian & Liu, Hao & Yan, Chizhou & Hou, Yang & He, Qinggang & Zhang, Jiujun & Hissel, Daniel, 2020. "Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems," Applied Energy, Elsevier, vol. 275(C).
    17. Ismail, A. & Kamarudin, S.K. & Daud, W.R.W. & Masdar, S. & Hasran, U.A., 2018. "Development of 2D multiphase non-isothermal mass transfer model for DMFC system," Energy, Elsevier, vol. 152(C), pages 263-276.
    18. Cheng, Shan-Jen & Miao, Jr-Ming & Wu, Sheng-Ju, 2012. "Investigating the effects of operational factors on PEMFC performance based on CFD simulations using a three-level full-factorial design," Renewable Energy, Elsevier, vol. 39(1), pages 250-260.
    19. Perna, Alessandra & Minutillo, Mariagiovanna & Jannelli, Elio, 2015. "Investigations on an advanced power system based on a high temperature polymer electrolyte membrane fuel cell and an organic Rankine cycle for heating and power production," Energy, Elsevier, vol. 88(C), pages 874-884.
    20. Zeng, Tao & Zhang, Caizhi & Hao, Dong & Cao, Dongpu & Chen, Jiawei & Chen, Jinrui & Li, Jin, 2020. "Data-driven approach for short-term power demand prediction of fuel cell hybrid vehicles," Energy, Elsevier, vol. 208(C).
    21. Chen, Ben & Zhou, Haoran & He, Shaowen & Meng, Kai & Liu, Yang & Cai, Yonghua, 2021. "Numerical simulation on purge strategy of proton exchange membrane fuel cell with dead-ended anode," Energy, Elsevier, vol. 234(C).
    22. Wu, Zhen & Tan, Peng & Chen, Bin & Cai, Weizi & Chen, Meina & Xu, Xiaoming & Zhang, Zaoxiao & Ni, Meng, 2019. "Dynamic modeling and operation strategy of an NG-fueled SOFC-WGS-TSA-PEMFC hybrid energy conversion system for fuel cell vehicle by using MATLAB/SIMULINK," Energy, Elsevier, vol. 175(C), pages 567-579.
    23. Ong, Samuel & Al-Othman, Amani & Tawalbeh, Muhammad, 2023. "Emerging technologies in prognostics for fuel cells including direct hydrocarbon fuel cells," Energy, Elsevier, vol. 277(C).
    24. Deng, Bo & Huang, Wentao & Jian, Qifei, 2023. "An open-cathode PEMFC efficiency optimization strategy based on exergy analysis and data-driven modeling," Energy, Elsevier, vol. 264(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Jun & Zhang, Caizhi & Li, Jin & Deng, Bo & Fan, Min & Ni, Meng & Mao, Zhanxin & Yuan, Honggeng, 2021. "Multi-perspective analysis of CO poisoning in high-temperature proton exchange membrane fuel cell stack via numerical investigation," Renewable Energy, Elsevier, vol. 180(C), pages 313-328.
    2. Li, Yanju & Li, Dongxu & Ma, Zheshu & Zheng, Meng & Lu, Zhanghao & Song, Hanlin & Guo, Xinjia & Shao, Wei, 2022. "Performance analysis and optimization of a novel vehicular power system based on HT-PEMFC integrated methanol steam reforming and ORC," Energy, Elsevier, vol. 257(C).
    3. Lu, Xiaohui & Li, Bing & Guo, Lin & Wang, Peifang & Yousefi, Nasser, 2021. "Exergy analysis of a polymer fuel cell and identification of its optimum operating conditions using improved Farmland Fertility Optimization," Energy, Elsevier, vol. 216(C).
    4. Bai, Xingying & Luo, Lizhong & Huang, Bi & Jian, Qifei & Cheng, Zongyi, 2022. "Performance improvement of proton exchange membrane fuel cell stack by dual-path hydrogen supply," Energy, Elsevier, vol. 246(C).
    5. Chen, Dongfang & Pei, Pucheng & Ren, Peng & Song, Xin & Wang, He & Zhang, Lu & Wang, Mingkai, 2022. "Analytical methods for the effect of anode nitrogen concentration on performance and voltage consistency of proton exchange membrane fuel cell stack," Energy, Elsevier, vol. 258(C).
    6. Wang, Chenfang & Li, Qingshan & Wang, Chunmei & Zhang, Yangjun & Zhuge, Weilin, 2021. "Thermodynamic analysis of a hydrogen fuel cell waste heat recovery system based on a zeotropic organic Rankine cycle," Energy, Elsevier, vol. 232(C).
    7. Chen, Ben & Cai, Yonghua & Tu, Zhengkai & Chan, Siew Hwa & Wang, Jun & Yu, Yi, 2017. "Gas purging effect on the degradation characteristic of a proton exchange membrane fuel cell with dead-ended mode operation I. With different electrolytes," Energy, Elsevier, vol. 141(C), pages 40-49.
    8. Quan, Shengwei & Wang, Ya-Xiong & Xiao, Xuelian & He, Hongwen & Sun, Fengchun, 2021. "Feedback linearization-based MIMO model predictive control with defined pseudo-reference for hydrogen regulation of automotive fuel cells," Applied Energy, Elsevier, vol. 293(C).
    9. Ruifeng Guo & Dongfang Chen & Yuehua Li & Wenlong Wu & Song Hu & Xiaoming Xu, 2023. "Anode Nitrogen Concentration Estimation Based on Voltage Variation Characteristics for Proton Exchange Membrane Fuel Cell Stacks," Energies, MDPI, vol. 16(5), pages 1-16, February.
    10. Hao, Xinyang & Salhi, Issam & Laghrouche, Salah & Ait Amirat, Youcef & Djerdir, Abdesslem, 2023. "Multiple inputs multi-phase interleaved boost converter for fuel cell systems applications," Renewable Energy, Elsevier, vol. 204(C), pages 521-531.
    11. Hyunyong Lee & Inchul Jung & Gilltae Roh & Youngseung Na & Hokeun Kang, 2020. "Comparative Analysis of On-Board Methane and Methanol Reforming Systems Combined with HT-PEM Fuel Cell and CO 2 Capture/Liquefaction System for Hydrogen Fueled Ship Application," Energies, MDPI, vol. 13(1), pages 1-25, January.
    12. Jianmei Feng & Jiquan Han & Zihui Pang & Xueyuan Peng, 2023. "Designing Hydrogen Recirculation Ejectors for Proton Exchange Membrane Fuel Cell Systems," Energies, MDPI, vol. 16(3), pages 1-10, January.
    13. Rezk, Hegazy & Olabi, A.G. & Ferahtia, Seydali & Sayed, Enas Taha, 2022. "Accurate parameter estimation methodology applied to model proton exchange membrane fuel cell," Energy, Elsevier, vol. 255(C).
    14. Guo, Xinru & Zhang, Houcheng & Hu, Ziyang & Hou, Shujin & Ni, Meng & Liao, Tianjun, 2021. "Energetic, exergetic and ecological evaluations of a hybrid system based on a phosphoric acid fuel cell and an organic Rankine cycle," Energy, Elsevier, vol. 217(C).
    15. Chen, Ben & Liu, Qi & Zhang, Cheng & Liu, Yang & Shen, Jun & Tu, Zhengkai, 2022. "Numerical study on water transfer characteristics under joint effect of placement orientation and flow channel size for PEMFC with dead-ended anode," Energy, Elsevier, vol. 254(PB).
    16. Guo, Xinru & Zhang, Houcheng & Yuan, Jinliang & Wang, Jiatang & Zhao, Jiapei & Wang, Fu & Miao, He & Hou, Shujin, 2019. "Performance assessment of a combined system consisting of a high-temperature polymer electrolyte membrane fuel cell and a thermoelectric generator," Energy, Elsevier, vol. 179(C), pages 762-770.
    17. Liu, Shihua & Li, Xiaoyang & Pang, Linjia & Geng, Tie & Guo, Yonggang & Jiang, Lin & Kang, Kejia & Wang, Xinchao & Liu, Zongyao, 2022. "Study on the effect of purging time on the performance of PEMFC with dead-ended anode under gravity," Renewable Energy, Elsevier, vol. 200(C), pages 1141-1151.
    18. Li, Bing & Wan, Kechuang & Xie, Meng & Chu, Tiankuo & Wang, Xiaolei & Li, Xiang & Yang, Daijun & Ming, Pingwen & Zhang, Cunman, 2022. "Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack," Applied Energy, Elsevier, vol. 314(C).
    19. Dongxu Li & Siwei Li & Zheshu Ma & Bing Xu & Zhanghao Lu & Yanju Li & Meng Zheng, 2021. "Ecological Performance Optimization of a High Temperature Proton Exchange Membrane Fuel Cell," Mathematics, MDPI, vol. 9(12), pages 1-15, June.
    20. Yang, Zixuan & Liu, Qian & Zhang, Leiyu & Dai, Jialei & Razmjooy, Navid, 2020. "Model parameter estimation of the PEMFCs using improved Barnacles Mating Optimization algorithm," Energy, Elsevier, vol. 212(C).

    More about this item

    Keywords

    High temperature proton exchange membrane fuel cell (HT-PEMFC); CO poisoning; Equivalent resistance; Limiting current density; H2 and CO coverage;
    All these keywords.

    JEL classification:

    • H2 - Public Economics - - Taxation, Subsidies, and Revenue

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223016997. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.