IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v278y2023ipbs0360544223013683.html
   My bibliography  Save this article

Solution approaches to inverse heat transfer problems with and without phase changes: A state-of-the-art review

Author

Listed:
  • Zálešák, Martin
  • Klimeš, Lubomír
  • Charvát, Pavel
  • Cabalka, Matouš
  • Kůdela, Jakub
  • Mauder, Tomáš

Abstract

Heat transfer problems (HTPs) with and without phase change are encountered in many areas of science and engineering. Some HTPs cannot be solved straightforwardly since certain heat transfer parameters are unknown. As a result, the need to find solutions to inverse HTPs arises. A number of approaches, methods, and algorithms for the solution of inverse HTPs have been developed and published in the past. Nonetheless, even the most recent handbooks dealing with inverse HTPs do not provide a comprehensive overview of the developments and advancements in this area (in particular the applications and comparisons of the methods). The present state-of-the-art review aims at filling this information gap and it also presents an overview of the most recent research works. Four classes of distinct methods and algorithms are addressed in detail; conventional (usually iterative and gradient-based) algorithms, nature-inspired meta-heuristic algorithms, techniques utilising artificial neural networks and machine learning, and algorithms based on fuzzy logic. The results obtained with the use of these methods are assessed and compared to each other. The intended contributions of the present review are twofold. Firstly, the review presents a comprehensive overview of the latest advancements and developments in the field of inverse HTPs, including cutting-edge research works. Secondly, it critically evaluates and compares the performance of different methods and algorithms, providing practical insights to researchers for the selection of suitable approaches to solve their specific inverse HTPs.

Suggested Citation

  • Zálešák, Martin & Klimeš, Lubomír & Charvát, Pavel & Cabalka, Matouš & Kůdela, Jakub & Mauder, Tomáš, 2023. "Solution approaches to inverse heat transfer problems with and without phase changes: A state-of-the-art review," Energy, Elsevier, vol. 278(PB).
    • Handle: RePEc:eee:energy:v:278:y:2023:i:pb:s0360544223013683
    DOI: 10.1016/j.energy.2023.127974
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223013683
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127974?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Cheng, Rui & Pomianowski, Michal & Wang, Xin & Heiselberg, Per & Zhang, Yinping, 2013. "A new method to determine thermophysical properties of PCM-concrete brick," Applied Energy, Elsevier, vol. 112(C), pages 988-998.
    2. Klimeš, Lubomír & Charvát, Pavel & Mastani Joybari, Mahmood & Zálešák, Martin & Haghighat, Fariborz & Panchabikesan, Karthik & El Mankibi, Mohamed & Yuan, Yanping, 2020. "Computer modelling and experimental investigation of phase change hysteresis of PCMs: The state-of-the-art review," Applied Energy, Elsevier, vol. 263(C).
    3. Yu, Yue & Xu, Dinghua, 2015. "On the inverse problem of thermal conductivity determination in nonlinear heat and moisture transfer model within textiles," Applied Mathematics and Computation, Elsevier, vol. 264(C), pages 284-299.
    4. Suvanjan Bhattacharyya & Debraj Sarkar & Rahul Roy & Shramona Chakraborty & Varun Goel & Eydhah Almatrafi, 2021. "Application of New Artificial Neural Network to Predict Heat Transfer and Thermal Performance of a Solar Air-Heater Tube," Sustainability, MDPI, vol. 13(13), pages 1-19, July.
    5. Merlin, Kevin & Delaunay, Didier & Soto, Jérôme & Traonvouez, Luc, 2016. "Heat transfer enhancement in latent heat thermal storage systems: Comparative study of different solutions and thermal contact investigation between the exchanger and the PCM," Applied Energy, Elsevier, vol. 166(C), pages 107-116.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Palacios, Anabel & Cong, Lin & Navarro, M.E. & Ding, Yulong & Barreneche, Camila, 2019. "Thermal conductivity measurement techniques for characterizing thermal energy storage materials – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 32-52.
    2. Shahsavar, Amin & Al-Rashed, Abdullah A.A.A. & Entezari, Sajad & Sardari, Pouyan Talebizadeh, 2019. "Melting and solidification characteristics of a double-pipe latent heat storage system with sinusoidal wavy channels embedded in a porous medium," Energy, Elsevier, vol. 171(C), pages 751-769.
    3. Roozbeh Vaziri & Akeem Adeyemi Oladipo & Mohsen Sharifpur & Rani Taher & Mohammad Hossein Ahmadi & Alibek Issakhov, 2021. "Efficiency Enhancement in Double-Pass Perforated Glazed Solar Air Heaters with Porous Beds: Taguchi-Artificial Neural Network Optimization and Cost–Benefit Analysis," Sustainability, MDPI, vol. 13(21), pages 1-18, October.
    4. Facundo Bre & Antonio Caggiano & Eduardus A. B. Koenders, 2022. "Multiobjective Optimization of Cement-Based Panels Enhanced with Microencapsulated Phase Change Materials for Building Energy Applications," Energies, MDPI, vol. 15(14), pages 1-17, July.
    5. Maria da Glória Gomes & José Alexandre Bogas & Sofia Real & António Moret Rodrigues & Rita Machete, 2023. "Thermal Performance Assessment of Lightweight Aggregate Concrete by Different Test Methods," Sustainability, MDPI, vol. 15(14), pages 1-18, July.
    6. Li, Huiqiang & Chen, Huisu & Li, Xiangyu & Sanjayan, Jay G., 2014. "Development of thermal energy storage composites and prevention of PCM leakage," Applied Energy, Elsevier, vol. 135(C), pages 225-233.
    7. Diao, Yanhua & Kang, Yameng & Liang, Lin & Zhao, Yaohua & Zhu, Tingting, 2017. "Experimental investigation on the heat transfer performance of a latent thermal energy storage device based on flat miniature heat pipe arrays," Energy, Elsevier, vol. 138(C), pages 929-941.
    8. Xiong, Teng & Shah, Kwok Wei & Kua, Harn Wei, 2021. "Thermal performance enhancement of cementitious composite containing polystyrene/n-octadecane microcapsules: An experimental and numerical study," Renewable Energy, Elsevier, vol. 169(C), pages 335-357.
    9. Miroslava Kavgic & Yaser Abdellatef, 2021. "Temperature Control to Improve Performance of Hempcrete-Phase Change Material Wall Assemblies in a Cold Climate," Energies, MDPI, vol. 14(17), pages 1-23, August.
    10. Matthias Singer & Michael Fischlschweiger & Tim Zeiner, 2023. "Investigation of the Heat Storage Capacity and Storage Dynamics of a Novel Polymeric Macro-Encapsulated Core-Shell Particle Using a Paraffinic Core," Energies, MDPI, vol. 16(2), pages 1-14, January.
    11. Hu, Yue & Guo, Rui & Heiselberg, Per Kvols, 2020. "Performance and control strategy development of a PCM enhanced ventilated window system by a combined experimental and numerical study," Renewable Energy, Elsevier, vol. 155(C), pages 134-152.
    12. Nie, Binjian & Zou, Boyang & She, Xiaohui & Zhang, Tongtong & Li, Yongliang & Ding, Yulong, 2020. "Development of a heat transfer coefficient based design method of a thermal energy storage device for transport air-conditioning applications," Energy, Elsevier, vol. 196(C).
    13. Alpar, Sultan & Rysbaiuly, Bolatbek, 2023. "Determination of thermophysical characteristics in a nonlinear inverse heat transfer problem," Applied Mathematics and Computation, Elsevier, vol. 440(C).
    14. Meng, Z.N. & Zhang, P., 2017. "Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCM," Applied Energy, Elsevier, vol. 190(C), pages 524-539.
    15. Giro-Paloma, Jessica & Martínez, Mònica & Cabeza, Luisa F. & Fernández, A. Inés, 2016. "Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1059-1075.
    16. Kasper, Lukas & Pernsteiner, Dominik & Schirrer, Alexander & Jakubek, Stefan & Hofmann, René, 2023. "Experimental characterization, parameter identification and numerical sensitivity analysis of a novel hybrid sensible/latent thermal energy storage prototype for industrial retrofit applications," Applied Energy, Elsevier, vol. 344(C).
    17. Guangdi Li & Qi Tang & Bo Hu & Min Ma, 2022. "Optimal Scheduling of Thermoelectric Coupling Energy System Considering Thermal Characteristics of DHN," Sustainability, MDPI, vol. 14(15), pages 1-20, August.
    18. Pereira da Cunha, Jose & Eames, Philip, 2016. "Thermal energy storage for low and medium temperature applications using phase change materials – A review," Applied Energy, Elsevier, vol. 177(C), pages 227-238.
    19. Giménez, P. & Jové, A. & Prieto, C. & Fereres, S., 2017. "Effect of an increased thermal contact resistance in a salt PCM-graphite foam composite TES system," Renewable Energy, Elsevier, vol. 106(C), pages 321-334.
    20. Liu, Ming & Omaraa, Ehsan Shamil & Qi, Jia & Haseli, Pegah & Ibrahim, Jumal & Sergeev, Dmitry & Müller, Michael & Bruno, Frank & Majewski, Peter, 2021. "Review and characterisation of high-temperature phase change material candidates between 500 C and 700°C," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:278:y:2023:i:pb:s0360544223013683. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.