IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipes0360544222026871.html
   My bibliography  Save this article

Experimental and numerical investigation on effects of thickness of NCM622 cathode in Li-ion batteries for high energy and power density

Author

Listed:
  • Kang, Jihyeon
  • Atwair, Mohamed
  • Nam, Inho
  • Lee, Chul-Jin

Abstract

The electrode thickness is one of the most important design strategies for enhancing the energy density of lithium-ion batteries in practical applications. However, thick electrodes suffer from severe capacity loss because of the limited Li+ ion diffusion. Herein, we reveal the optimum point for high energy and power density by investigating the rated capacity that is dependent on the electrode thickness and C-rates using a pseudo-two-dimensional model-based simulation and experimental results. The experimental results showed that the cathode (NCM 622) with a thickness of 86 μm had the most stable performance in the range of C-rates from 0.1C to 2C. In contrast, the optimal thickness in the simulation was 104 μm for a various range of C-rates, indicating the difference in the capacity loss between the experiment and simulation with increasing C-rate. The disparity in the rated capacity between the simulation and experiment is attributed to the inhomogeneity inside the cathode with the increase in mechanical cracks. Based on the experimental and simulation results, we present new insights on the importance of a completed uniform electrode film for high-power NCM 622 cathodes to develop a practical fabrication method for maximum capacity while maintaining high energy and power density.

Suggested Citation

  • Kang, Jihyeon & Atwair, Mohamed & Nam, Inho & Lee, Chul-Jin, 2023. "Experimental and numerical investigation on effects of thickness of NCM622 cathode in Li-ion batteries for high energy and power density," Energy, Elsevier, vol. 263(PE).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222026871
    DOI: 10.1016/j.energy.2022.125801
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222026871
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125801?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Shuaifeng Lou & Qianwen Liu & Fang Zhang & Qingsong Liu & Zhenjiang Yu & Tiansheng Mu & Yang Zhao & James Borovilas & Yijun Chen & Mingyuan Ge & Xianghui Xiao & Wah-Keat Lee & Geping Yin & Yuan Yang &, 2020. "Insights into interfacial effect and local lithium-ion transport in polycrystalline cathodes of solid-state batteries," Nature Communications, Nature, vol. 11(1), pages 1-10, December.
    2. Noelle, Daniel J. & Wang, Meng & Le, Anh V. & Shi, Yang & Qiao, Yu, 2018. "Internal resistance and polarization dynamics of lithium-ion batteries upon internal shorting," Applied Energy, Elsevier, vol. 212(C), pages 796-808.
    3. Xu, Meng & Reichman, Benjamin & Wang, Xia, 2019. "Modeling the effect of electrode thickness on the performance of lithium-ion batteries with experimental validation," Energy, Elsevier, vol. 186(C).
    4. Zhang, Meng & Kang, Guoqing & Wu, Lifeng & Guan, Yong, 2022. "A method for capacity prediction of lithium-ion batteries under small sample conditions," Energy, Elsevier, vol. 238(PC).
    5. Feng, Fei & Yang, Rui & Meng, Jinhao & Xie, Yi & Zhang, Zhiguo & Chai, Yi & Mou, Lisha, 2022. "Electrochemical impedance characteristics at various conditions for commercial solid–liquid electrolyte lithium-ion batteries: Part 1. experiment investigation and regression analysis," Energy, Elsevier, vol. 242(C).
    6. Xiao, Renxin & Hu, Yanwen & Jia, Xianguang & Chen, Guisheng, 2022. "A novel estimation of state of charge for the lithium-ion battery in electric vehicle without open circuit voltage experiment," Energy, Elsevier, vol. 243(C).
    7. Feng, Fei & Yang, Rui & Meng, Jinhao & Xie, Yi & Zhang, Zhiguo & Chai, Yi & Mou, Lisha, 2022. "Electrochemical impedance characteristics at various conditions for commercial solid–liquid electrolyte lithium-ion batteries: Part. 2. Modeling and prediction," Energy, Elsevier, vol. 243(C).
    8. Wang, Feng & Zhang, Lin & Zhang, Qian & Yang, Jinjiang & Duan, Gaigai & Xu, Wenhui & Yang, Feng & Jiang, Shaohua, 2021. "Electrode thickness design toward bulk energy storage devices with high areal/volumetric energy density," Applied Energy, Elsevier, vol. 289(C).
    9. Ning Kang & Yuxiao Lin & Li Yang & Dongping Lu & Jie Xiao & Yue Qi & Mei Cai, 2019. "Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density," Nature Communications, Nature, vol. 10(1), pages 1-10, December.
    10. Zheng, Yuejiu & Cui, Yifan & Han, Xuebing & Ouyang, Minggao, 2021. "A capacity prediction framework for lithium-ion batteries using fusion prediction of empirical model and data-driven method," Energy, Elsevier, vol. 237(C).
    11. Arumugam Manthiram, 2020. "A reflection on lithium-ion battery cathode chemistry," Nature Communications, Nature, vol. 11(1), pages 1-9, December.
    12. Zhao, Rui & Liu, Jie & Gu, Junjie, 2015. "The effects of electrode thickness on the electrochemical and thermal characteristics of lithium ion battery," Applied Energy, Elsevier, vol. 139(C), pages 220-229.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Da & Zhang, Lei & Zhang, Zhaosheng & Liu, Peng & Deng, Junjun & Wang, Qiushi & Wang, Zhenpo, 2023. "Battery safety issue detection in real-world electric vehicles by integrated modeling and voltage abnormality," Energy, Elsevier, vol. 284(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fan, Kesen & Wan, Yiming & Wang, Zhuo & Jiang, Kai, 2023. "Time-efficient identification of lithium-ion battery temperature-dependent OCV-SOC curve using multi-output Gaussian process," Energy, Elsevier, vol. 268(C).
    2. Lai, Xin & Zhou, Long & Zhu, Zhiwei & Zheng, Yuejiu & Sun, Tao & Shen, Kai, 2023. "Experimental investigation on the characteristics of coulombic efficiency of lithium-ion batteries considering different influencing factors," Energy, Elsevier, vol. 274(C).
    3. Tian, Jiaqiang & Liu, Xinghua & Li, Siqi & Wei, Zhongbao & Zhang, Xu & Xiao, Gaoxi & Wang, Peng, 2023. "Lithium-ion battery health estimation with real-world data for electric vehicles," Energy, Elsevier, vol. 270(C).
    4. Zhang, Yixing & Feng, Fei & Wang, Shunli & Meng, Jinhao & Xie, Jiale & Ling, Rui & Yin, Hongpeng & Zhang, Ke & Chai, Yi, 2023. "Joint nonlinear-drift-driven Wiener process-Markov chain degradation switching model for adaptive online predicting lithium-ion battery remaining useful life," Applied Energy, Elsevier, vol. 341(C).
    5. Donghyeon Yoo & Jinhwan Park & Jaemin Moon & Changwan Kim, 2021. "Reliability-Based Design Optimization for Reducing the Performance Failure and Maximizing the Specific Energy of Lithium-Ion Batteries Considering Manufacturing Uncertainty of Porous Electrodes," Energies, MDPI, vol. 14(19), pages 1-15, September.
    6. Takyi-Aninakwa, Paul & Wang, Shunli & Zhang, Hongying & Yang, Xiao & Fernandez, Carlos, 2023. "A hybrid probabilistic correction model for the state of charge estimation of lithium-ion batteries considering dynamic currents and temperatures," Energy, Elsevier, vol. 273(C).
    7. Yang, Yang & Yuan, Wei & Zhang, Xiaoqing & Yuan, Yuhang & Wang, Chun & Ye, Yintong & Huang, Yao & Qiu, Zhiqiang & Tang, Yong, 2020. "Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries," Applied Energy, Elsevier, vol. 257(C).
    8. Zhang, Jiusi & Jiang, Yuchen & Li, Xiang & Huo, Mingyi & Luo, Hao & Yin, Shen, 2022. "An adaptive remaining useful life prediction approach for single battery with unlabeled small sample data and parameter uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    9. Li, Xiaoyu & Zhang, Zuguang & Wang, Wenhui & Tian, Yong & Li, Dong & Tian, Jindong, 2020. "Multiphysical field measurement and fusion for battery electric-thermal-contour performance analysis," Applied Energy, Elsevier, vol. 262(C).
    10. He, Rong & He, Yongling & Xie, Wenlong & Guo, Bin & Yang, Shichun, 2023. "Comparative analysis for commercial li-ion batteries degradation using the distribution of relaxation time method based on electrochemical impedance spectroscopy," Energy, Elsevier, vol. 263(PD).
    11. Liu, Xinghua & Li, Siqi & Tian, Jiaqiang & Wei, Zhongbao & Wang, Peng, 2023. "Health estimation of lithium-ion batteries with voltage reconstruction and fusion model," Energy, Elsevier, vol. 282(C).
    12. Park, Sung-Won & Son, Sung-Yong, 2023. "Techno-economic analysis for the electric vehicle battery aging management of charge point operator," Energy, Elsevier, vol. 280(C).
    13. Liao, Xiaolin & Sun, Peiyi & Xu, Mengqing & Xing, Lidan & Liao, Youhao & Zhang, Liping & Yu, Le & Fan, Weizhen & Li, Weishan, 2016. "Application of tris(trimethylsilyl)borate to suppress self-discharge of layered nickel cobalt manganese oxide for high energy battery," Applied Energy, Elsevier, vol. 175(C), pages 505-511.
    14. Wang, Shunli & Wu, Fan & Takyi-Aninakwa, Paul & Fernandez, Carlos & Stroe, Daniel-Ioan & Huang, Qi, 2023. "Improved singular filtering-Gaussian process regression-long short-term memory model for whole-life-cycle remaining capacity estimation of lithium-ion batteries adaptive to fast aging and multi-curren," Energy, Elsevier, vol. 284(C).
    15. Lybbert, M. & Ghaemi, Z. & Balaji, A.K. & Warren, R., 2021. "Integrating life cycle assessment and electrochemical modeling to study the effects of cell design and operating conditions on the environmental impacts of lithium-ion batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    16. Badreah Ali Al Jahdaly & Mohamed Farouk Elsadek & Badreldin Mohamed Ahmed & Mohamed Fawzy Farahat & Mohamed M. Taher & Ahmed M. Khalil, 2021. "Outstanding Graphene Quantum Dots from Carbon Source for Biomedical and Corrosion Inhibition Applications: A Review," Sustainability, MDPI, vol. 13(4), pages 1-33, February.
    17. Yang, Yue & Chen, Lei & Yang, Lijun & Du, Xiaoze & Yang, Yongping, 2020. "Capacity fade characteristics of lithium iron phosphate cell during dynamic cycle," Energy, Elsevier, vol. 206(C).
    18. Tian, Yong & Dong, Qianyuan & Tian, Jindong & Li, Xiaoyu & Li, Guang & Mehran, Kamyar, 2023. "Capacity estimation of lithium-ion batteries based on optimized charging voltage section and virtual sample generation," Applied Energy, Elsevier, vol. 332(C).
    19. Mi Tian & Yanchunxiao Qi & Eun-Suok Oh, 2021. "Application of a Polyacrylate Latex to a Lithium Iron Phosphate Cathode as a Binder Material," Energies, MDPI, vol. 14(7), pages 1-10, March.
    20. Xiong, Rui & Sun, Wanzhou & Yu, Quanqing & Sun, Fengchun, 2020. "Research progress, challenges and prospects of fault diagnosis on battery system of electric vehicles," Applied Energy, Elsevier, vol. 279(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pe:s0360544222026871. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.