IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v259y2022ics0360544222017893.html

Investigation on water injection characteristics and its influence on the performance of twin-screw steam compressor

Author

Listed:
  • Tian, Yafen
  • Geng, Yanting
  • Yuan, Hao
  • Zhao, Zhaorui

Abstract

Water injected twin-screw steam compressor has great energy-saving potential in mechanical vapor compression, high temperature heat pump and steam production applications. To investigate the water injection characteristics and its influence on compressor performance under different operating conditions, a detailed thermodynamic model was developed for the working process. Heat and mass transfer between injected water and compressed vapor were considered, together with leakage of two-phase flow and power consumption of excess liquid water. Comparison between simulated results and experimental results show reasonable agreement with an error of ±5%. With the validated model, the effects of operating parameters on compressor performance and optimum injected water flowrate were investigated. Results proves water injection to be an efficient approach to improve compressor performance if properly applied. Compared with no water injection, the volumetric efficiency and isentropic efficiency with injection can be promoted by 11.9% and 17.2% respectively. As the injected water flowrate increases, the compressor efficiency firstly increases to a maximum value and then reduces when the injected flowrate is superabundant. The optimum injected water flowrate is dominated by rotating speed and nearly proportional to the rotating speed, while the optimum mass ratio of the injected water to the compressed vapor varies between 8.9% and 10.4%.

Suggested Citation

  • Tian, Yafen & Geng, Yanting & Yuan, Hao & Zhao, Zhaorui, 2022. "Investigation on water injection characteristics and its influence on the performance of twin-screw steam compressor," Energy, Elsevier, vol. 259(C).
    • Handle: RePEc:eee:energy:v:259:y:2022:i:c:s0360544222017893
    DOI: 10.1016/j.energy.2022.124886
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222017893
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124886?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Hu, Bin & Wu, Di & Wang, R.Z., 2018. "Water vapor compression and its various applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 92-107.
    2. Bergamini, Riccardo & Jensen, Jonas Kjær & Elmegaard, Brian, 2019. "Thermodynamic competitiveness of high temperature vapor compression heat pumps for boiler substitution," Energy, Elsevier, vol. 182(C), pages 110-121.
    3. Yin, Haoyu & Wu, Hong & Li, Yulong & Quan, Jin, 2020. "Performance analysis of the water-injected centrifugal vapor compressor," Energy, Elsevier, vol. 200(C).
    4. Wu, Di & Jiang, Jiatong & Hu, Bin & Wang, R.Z., 2020. "Experimental investigation on the performance of a very high temperature heat pump with water refrigerant," Energy, Elsevier, vol. 190(C).
    5. Arpagaus, Cordin & Bless, Frédéric & Uhlmann, Michael & Schiffmann, Jürg & Bertsch, Stefan S., 2018. "High temperature heat pumps: Market overview, state of the art, research status, refrigerants, and application potentials," Energy, Elsevier, vol. 152(C), pages 985-1010.
    6. Yan, Hongzhi & Hu, Bin & Wang, Ruzhu, 2021. "Air-source heat pump heating based water vapor compression for localized steam sterilization applications during the COVID-19 pandemic," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Feng, Jiayu & Gao, Jintong & Hu, Bin & Wang, Ruzhu & Xu, Zhenyuan, 2024. "A mass-coupled hybrid absorption-compression heat pump with output temperature of 200 °C," Energy, Elsevier, vol. 312(C).
    2. Tao Wang & Qiang Qi & Wei Zhang & Dengyi Zhan, 2023. "Research on Optimization of Profile Parameters in Screw Compressor Based on BP Neural Network and Genetic Algorithm," Energies, MDPI, vol. 16(9), pages 1-17, April.
    3. Zhao, Zhaorui & Zhang, Jingyu & Wang, Gaofeng & Yuan, Hao & Tian, Yafen, 2024. "Research and clearance analysis on of steam twin-screw expander employed in indutrial waste heat recovery," Energy, Elsevier, vol. 312(C).
    4. Li, Yanpeng & Liu, Yishuang & Li, Zengqun & Wang, Chuang & Xing, Ziwen & Ren, Dawei & Zhu, Yili, 2024. "Semi-empirical model of the twin-screw refrigeration compressor with capacity control devices," Energy, Elsevier, vol. 305(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Ruzhu & Yan, Hongzhi & Wu, Di & Jiang, Jiatong & Dong, Yixiu, 2024. "High temperature heat pumps for industrial heating processes using water as refrigerant," Energy, Elsevier, vol. 313(C).
    2. Jian Sun & Yinwu Wang & Yu Qin & Guoshun Wang & Ran Liu & Yongping Yang, 2023. "A Review of Super-High-Temperature Heat Pumps over 100 °C," Energies, MDPI, vol. 16(12), pages 1-18, June.
    3. Yoo, JunSoo & Estrada-Perez, Carlos E. & Choi, Byung-Hee, 2025. "Investigation of heat pump technologies for high-temperature applications above 250 °C," Applied Energy, Elsevier, vol. 384(C).
    4. Wu, Di & Wei, Junzhuo & Wang, R.Z., 2025. "Performance investigation of a new hybrid high-temperature heat PUMP with natural water medium," Energy, Elsevier, vol. 314(C).
    5. Dong, Yixiu & Madani, Hatef & Xu, Tianhao & Kou, Xiaoxue & Wang, Ruzhu, 2026. "Solution-oriented strategies to enhance the deployment of industrial high temperature heat pump," Renewable and Sustainable Energy Reviews, Elsevier, vol. 226(PD).
    6. Feng, Jiayu & Gao, Jintong & Hu, Bin & Wang, Ruzhu & Xu, Zhenyuan, 2024. "A mass-coupled hybrid absorption-compression heat pump with output temperature of 200 °C," Energy, Elsevier, vol. 312(C).
    7. Sergio Bobbo & Giulia Lombardo & Davide Menegazzo & Laura Vallese & Laura Fedele, 2024. "A Technological Update on Heat Pumps for Industrial Applications," Energies, MDPI, vol. 17(19), pages 1-55, October.
    8. Dong, Yixiu & Madani, Hatef & Kou, Xiaoxue & Wang, Ruzhu, 2025. "High temperature heat pump with dual uses of cooling and heating for industrial applications," Applied Energy, Elsevier, vol. 379(C).
    9. Hu, Bin & Xu, Liang & Xiang, Bo & Shi, Lijun & Jiang, Shuai & Jia, Jikang & Lv, Yongji & Tan, Maoxin & Si, Pengfei, 2025. "Experimental study on a direct steam generation unit of high temperature air source heat pump," Energy, Elsevier, vol. 330(C).
    10. Jiang, Jiatong & Hu, Bin & Wang, R.Z. & Deng, Na & Cao, Feng & Wang, Chi-Chuan, 2022. "A review and perspective on industry high-temperature heat pumps," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    11. Liu, Yishuang & Wang, Bingdong & Wang, Chuang & Liu, Lixin & Sun, Tianrui & Han, Yaoxiang & Xing, Ziwen, 2025. "Performance comparison of direct and flash steam generating heat pump using R1233zd(E) for waste heat recovery," Energy, Elsevier, vol. 326(C).
    12. Sadeghi, Mohsen & Petersen, Tage & Yang, Zhenyu & Zühlsdorf, Benjamin & Madsen, Kim Stenholdt, 2024. "Thermal and economic performance assessment of different high temperature heat pump layouts for upgrading district heating to process heating of steam production at 160°C," Energy, Elsevier, vol. 313(C).
    13. Jiang, Jiatong & Hu, Bin & Ge, Tianshu & Wang, R.Z., 2022. "Comprehensive selection and assessment methodology of compression heat pump system," Energy, Elsevier, vol. 241(C).
    14. Jouhara, Hussam & Żabnieńska-Góra, Alina & Delpech, Bertrand & Olabi, Valentina & El Samad, Tala & Sayma, Abdulnaser, 2024. "High-temperature heat pumps: Fundamentals, modelling approaches and applications," Energy, Elsevier, vol. 303(C).
    15. Wu, Di & Hu, Bin & Wang, R.Z., 2021. "Vapor compression heat pumps with pure Low-GWP refrigerants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    16. Giorgio Villa & Josè Luis Corrales Ciganda & Gianluca Abrami & Tommaso Toppi, 2025. "Absorption Heat Transformer and Vapor Compression Heat Pump as Alternative Options for Waste Heat Upgrade in the Industry," Energies, MDPI, vol. 18(13), pages 1-23, June.
    17. Wu, Di & Hu, Bin & Wang, R.Z. & Fan, Haibin & Wang, Rujin, 2020. "The performance comparison of high temperature heat pump among R718 and other refrigerants," Renewable Energy, Elsevier, vol. 154(C), pages 715-722.
    18. Wu, Di & Jiang, Jiatong & Hu, Bin & Wang, R.Z., 2020. "Experimental investigation on the performance of a very high temperature heat pump with water refrigerant," Energy, Elsevier, vol. 190(C).
    19. Andersen, Martin Pihl & Zühlsdorf, Benjamin & Markussen, Wiebke Brix & Jensen, Jonas Kjær & Elmegaard, Brian, 2024. "Selection of working fluids and heat pump cycles at high temperatures: Creating a concise technology portfolio," Applied Energy, Elsevier, vol. 376(PB).
    20. Dai, Baomin & Liu, Xiao & Liu, Shengchun & Wang, Dabiao & Meng, Chenyang & Wang, Qi & Song, Yifan & Zou, Tonghua, 2022. "Life cycle performance evaluation of cascade-heating high temperature heat pump system for waste heat utilization: Energy consumption, emissions and financial analyses," Energy, Elsevier, vol. 261(PB).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:259:y:2022:i:c:s0360544222017893. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.