IDEAS home Printed from https://ideas.repec.org/a/eee/ejores/v251y2016i1p96-106.html
   My bibliography  Save this article

Dual-mode production planning for manufacturing with emission constraints

Author

Listed:
  • Hong, Zhaofu
  • Chu, Chengbin
  • Yu, Yugang

Abstract

We study a dual-mode production planning problem with emission constraints, where a manufacturer produces a single product with two optional technologies. The manufacturer is equipped with the regular and green technologies to comply with emission limitations, and either one or both can be adopted for production. We first investigate the problem under a mandatory emission-cap policy and then extend it to consider emission trading under an emission cap-and-trade scheme. Based on the structural properties of the problem and a multi-level decomposition approach, a polynomial dynamic programming algorithm is developed to solve the models optimally. Our analysis shows that the manufacturer should only use a mix of both technologies when the emission cap is a binding constraint. Numerical results show that the manufacturer’s decisions and benefits are significantly affected by the emission cap under the mandatory emission-cap policy, especially when the cap is at a relatively low level. However, the carbon price may not remarkably affect the manufacturer’s cost because its influence could be abated through the flexible technology switch under the emission cap-and-trade scheme.

Suggested Citation

  • Hong, Zhaofu & Chu, Chengbin & Yu, Yugang, 2016. "Dual-mode production planning for manufacturing with emission constraints," European Journal of Operational Research, Elsevier, vol. 251(1), pages 96-106.
  • Handle: RePEc:eee:ejores:v:251:y:2016:i:1:p:96-106
    DOI: 10.1016/j.ejor.2015.11.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0377221715010280
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ejor.2015.11.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Retel Helmrich, Mathijn J. & Jans, Raf & van den Heuvel, Wilco & Wagelmans, Albert P.M., 2015. "The economic lot-sizing problem with an emission capacity constraint," European Journal of Operational Research, Elsevier, vol. 241(1), pages 50-62.
    2. Hua, Guowei & Cheng, T.C.E. & Wang, Shouyang, 2011. "Managing carbon footprints in inventory management," International Journal of Production Economics, Elsevier, vol. 132(2), pages 178-185, August.
    3. Jingpu Song & Mingming Leng, 2012. "Analysis of the Single-Period Problem under Carbon Emissions Policies," International Series in Operations Research & Management Science, in: Tsan-Ming Choi (ed.), Handbook of Newsvendor Problems, edition 127, chapter 0, pages 297-313, Springer.
    4. Xiting Gong & Sean X. Zhou, 2013. "Optimal Production Planning with Emissions Trading," Operations Research, INFORMS, vol. 61(4), pages 908-924, August.
    5. Hellion, Bertrand & Mangione, Fabien & Penz, Bernard, 2012. "A polynomial time algorithm to solve the single-item capacitated lot sizing problem with minimum order quantities and concave costs," European Journal of Operational Research, Elsevier, vol. 222(1), pages 10-16.
    6. Okhrin, Irena & Richter, Knut, 2011. "An O(T3) algorithm for the capacitated lot sizing problem with minimum order quantities," European Journal of Operational Research, Elsevier, vol. 211(3), pages 507-514, June.
    7. Harvey M. Wagner & Thomson M. Whitin, 1958. "Dynamic Version of the Economic Lot Size Model," Management Science, INFORMS, vol. 5(1), pages 89-96, October.
    8. Gabriel R. Bitran & Horacio H. Yanasse, 1982. "Computational Complexity of the Capacitated Lot Size Problem," Management Science, INFORMS, vol. 28(10), pages 1174-1186, October.
    9. Letmathe, Peter & Balakrishnan, Nagraj, 2005. "Environmental considerations on the optimal product mix," European Journal of Operational Research, Elsevier, vol. 167(2), pages 398-412, December.
    10. Rosič, Heidrun & Jammernegg, Werner, 2013. "The economic and environmental performance of dual sourcing: A newsvendor approach," International Journal of Production Economics, Elsevier, vol. 143(1), pages 109-119.
    11. Yalabik, Baris & Fairchild, Richard J., 2011. "Customer, regulatory, and competitive pressure as drivers of environmental innovation," International Journal of Production Economics, Elsevier, vol. 131(2), pages 519-527, June.
    12. Renee Rico, 1995. "The U.S. allowance trading system for sulfur dioxide: An update on market experience," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 5(2), pages 115-129, March.
    13. Stavins, Robert N., 1997. "Policy Instruments for Climate Change: How Can National Governments Address a Global Problem?," Discussion Papers 10757, Resources for the Future.
    14. Zhang, Bin & Xu, Liang, 2013. "Multi-item production planning with carbon cap and trade mechanism," International Journal of Production Economics, Elsevier, vol. 144(1), pages 118-127.
    15. Michael Florian & Morton Klein, 1971. "Deterministic Production Planning with Concave Costs and Capacity Constraints," Management Science, INFORMS, vol. 18(1), pages 12-20, September.
    16. Burtraw, Dallas & McLaughlin, David & Szambelan, Sarah Jo, 2012. "California’s New Gold: A Primer on the Use of Allowance Value Created under the CO2 Cap-and-Trade Program," RFF Working Paper Series dp-12-23, Resources for the Future.
    17. Barreto, Leonardo & Kypreos, Socrates, 2004. "Emissions trading and technology deployment in an energy-systems "bottom-up" model with technology learning," European Journal of Operational Research, Elsevier, vol. 158(1), pages 243-261, October.
    18. Cary Swoveland, 1975. "A Deterministic Multi-Period Production Planning Model with Piecewise Concave Production and Holding-Backorder Costs," Management Science, INFORMS, vol. 21(9), pages 1007-1013, May.
    19. Yi, Wen-Jing & Zou, Le-Le & Guo, Jie & Wang, Kai & Wei, Yi-Ming, 2011. "How can China reach its CO2 intensity reduction targets by 2020? A regional allocation based on equity and development," Energy Policy, Elsevier, vol. 39(5), pages 2407-2415, May.
    20. Absi, Nabil & Dauzère-Pérès, Stéphane & Kedad-Sidhoum, Safia & Penz, Bernard & Rapine, Christophe, 2013. "Lot sizing with carbon emission constraints," European Journal of Operational Research, Elsevier, vol. 227(1), pages 55-61.
    21. Ahmet B. Keha & Ismael R. de Farias & George L. Nemhauser, 2006. "A Branch-and-Cut Algorithm Without Binary Variables for Nonconvex Piecewise Linear Optimization," Operations Research, INFORMS, vol. 54(5), pages 847-858, October.
    22. M. Florian & J. K. Lenstra & A. H. G. Rinnooy Kan, 1980. "Deterministic Production Planning: Algorithms and Complexity," Management Science, INFORMS, vol. 26(7), pages 669-679, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hong, Zhaofu & Guo, Xiaolong, 2019. "Green product supply chain contracts considering environmental responsibilities," Omega, Elsevier, vol. 83(C), pages 155-166.
    2. Gutiérrez, E. & Llorca, N. & Sánchez-Soriano, J. & Mosquera, M., 2018. "Sustainable allocation of greenhouse gas emission permits for firms with Leontief technologies," European Journal of Operational Research, Elsevier, vol. 269(1), pages 5-15.
    3. Li, Guo & Wu, Huamin & Sethi, Suresh P. & Zhang, Xiang, 2021. "Contracting green product supply chains considering marketing efforts in the circular economy era," International Journal of Production Economics, Elsevier, vol. 234(C).
    4. Hong, Zhaofu & Dai, Wei & Luh, Hsing & Yang, Chenchen, 2018. "Optimal configuration of a green product supply chain with guaranteed service time and emission constraints," European Journal of Operational Research, Elsevier, vol. 266(2), pages 663-677.
    5. Yang, Rui & Tang, Wansheng & Zhang, Jianxiong, 2021. "Technology improvement strategy for green products under competition: The role of government subsidy," European Journal of Operational Research, Elsevier, vol. 289(2), pages 553-568.
    6. Qixiang Wang & Xiaobo Wang, 2022. "Does Product Eco-design Promote Remanufacturing: Application of a Stylized Game-theoretic Model," Sustainability, MDPI, vol. 15(1), pages 1-20, December.
    7. Pazoki, Mostafa & Samarghandi, Hamed, 2020. "Take-back regulation: Remanufacturing or Eco-design?," International Journal of Production Economics, Elsevier, vol. 227(C).
    8. Konur, Dinçer & Campbell, James F. & Monfared, Sepideh A., 2017. "Economic and environmental considerations in a stochastic inventory control model with order splitting under different delivery schedules among suppliers," Omega, Elsevier, vol. 71(C), pages 46-65.
    9. Cai, Jianhu & Jiang, Feiying, 2023. "Decision models of pricing and carbon emission reduction for low-carbon supply chain under cap-and-trade regulation," International Journal of Production Economics, Elsevier, vol. 264(C).
    10. Xiaojiao Qiao & Shimeng Xu & Dan Shi & Xiukun Zhao, 2023. "Data-Driven Sustainable Supply Chain Decision Making in the Presence of Low Carbon Awareness," Sustainability, MDPI, vol. 15(12), pages 1-16, June.
    11. Wei, Liqun & Zhang, Jianxiong & Dai, Rui & Zhu, Guowei, 2019. "Green flexible vs. inflexible capacity strategies for duopoly," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 122(C), pages 247-267.
    12. Suzanne, Elodie & Absi, Nabil & Borodin, Valeria, 2020. "Towards circular economy in production planning: Challenges and opportunities," European Journal of Operational Research, Elsevier, vol. 287(1), pages 168-190.
    13. Huang, Weixiang & Zhou, Wenhui & Chen, Jiguang & Chen, Xiaohong, 2019. "The government’s optimal subsidy scheme under Manufacturers’ competition of price and product energy efficiency," Omega, Elsevier, vol. 84(C), pages 70-101.
    14. Ma, Junhai & Hou, Yaming & Wang, Zongxian & Yang, Wenhui, 2021. "Pricing strategy and coordination of automobile manufacturers based on government intervention and carbon emission reduction," Energy Policy, Elsevier, vol. 148(PA).
    15. Tajbakhsh, Alireza & Hassini, Elkafi, 2022. "A game-theoretic approach for pollution control initiatives," International Journal of Production Economics, Elsevier, vol. 254(C).
    16. Hong, Zhaofu & Chu, Chengbin & Zhang, Linda L. & Yu, Yugang, 2017. "Optimizing an emission trading scheme for local governments: A Stackelberg game model and hybrid algorithm," International Journal of Production Economics, Elsevier, vol. 193(C), pages 172-182.
    17. Linghu, Dazhi & Wu, Xilin & Lai, Kee-Hung & Ye, Fei & Kumar, Ajay & Tan, Kim Hua, 2022. "Implementation strategy and emission reduction effectiveness of carbon cap-and-trade in heterogeneous enterprises," International Journal of Production Economics, Elsevier, vol. 248(C).
    18. Rui Dai & Jianxiong Zhang & Guowei Liu, 2020. "Carbon Tariff vs. Emission Cap of North–South Countries in Response to Manufacturer’s Production," Sustainability, MDPI, vol. 12(4), pages 1-20, February.
    19. Letmathe, Peter & Wagner, Sandra, 2018. "“Messy” marginal costs: Internal pricing of environmental aspects on the firm level," International Journal of Production Economics, Elsevier, vol. 201(C), pages 41-52.
    20. Wakhid Ahmad Jauhari & I Nyoman Pujawan & Mokh Suef, 2023. "Sustainable inventory management with hybrid production system and investment to reduce defects," Annals of Operations Research, Springer, vol. 324(1), pages 543-572, May.
    21. Yenipazarli, Arda, 2019. "Incentives for environmental research and development: Consumer preferences, competitive pressure and emissions taxation," European Journal of Operational Research, Elsevier, vol. 276(2), pages 757-769.
    22. Meng, Mingyou & Deng, Shiming & Zhou, Pin & Xu, He, 2023. "The effects of subsidy programs in byproduct synergy operations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 175(C).
    23. Zhou, Yu & Xiong, Yu & Jin, Minyue, 2021. "Less is more: Consumer education in a closed-loop supply chain with remanufacturing," Omega, Elsevier, vol. 101(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Brahimi, Nadjib & Absi, Nabil & Dauzère-Pérès, Stéphane & Nordli, Atle, 2017. "Single-item dynamic lot-sizing problems: An updated survey," European Journal of Operational Research, Elsevier, vol. 263(3), pages 838-863.
    2. Konur, Dinçer & Campbell, James F. & Monfared, Sepideh A., 2017. "Economic and environmental considerations in a stochastic inventory control model with order splitting under different delivery schedules among suppliers," Omega, Elsevier, vol. 71(C), pages 46-65.
    3. Chung-Lun Li & Qingying Li, 2016. "Polynomial-Time Solvability of Dynamic Lot Size Problems," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 33(03), pages 1-20, June.
    4. Palak, Gökçe & Ekşioğlu, Sandra Duni & Geunes, Joseph, 2014. "Analyzing the impacts of carbon regulatory mechanisms on supplier and mode selection decisions: An application to a biofuel supply chain," International Journal of Production Economics, Elsevier, vol. 154(C), pages 198-216.
    5. Ou, Jinwen, 2017. "Improved exact algorithms to economic lot-sizing with piecewise linear production costs," European Journal of Operational Research, Elsevier, vol. 256(3), pages 777-784.
    6. Lin, Xiaogang & Chen, Danna & Zhou, Yong-Wu & Lin, Qiang, 2022. "Horizontal mergers in low carbon manufacturing," European Journal of Operational Research, Elsevier, vol. 297(1), pages 359-368.
    7. Hong, Zhaofu & Chu, Chengbin & Zhang, Linda L. & Yu, Yugang, 2017. "Optimizing an emission trading scheme for local governments: A Stackelberg game model and hybrid algorithm," International Journal of Production Economics, Elsevier, vol. 193(C), pages 172-182.
    8. Schaefer, Brian & Konur, Dinçer, 2015. "Economic and environmental considerations in a continuous review inventory control system with integrated transportation decisions," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 80(C), pages 142-165.
    9. Bouchery, Yann & Ghaffari, Asma & Jemai, Zied & Tan, Tarkan, 2017. "Impact of coordination on costs and carbon emissions for a two-echelon serial economic order quantity problem," European Journal of Operational Research, Elsevier, vol. 260(2), pages 520-533.
    10. Hnaien, Faicel & Afsar, Hasan Murat, 2017. "Robust single-item lot-sizing problems with discrete-scenario lead time," International Journal of Production Economics, Elsevier, vol. 185(C), pages 223-229.
    11. Esra Koca & Hande Yaman & M. Selim Aktürk, 2014. "Lot Sizing with Piecewise Concave Production Costs," INFORMS Journal on Computing, INFORMS, vol. 26(4), pages 767-779, November.
    12. Absi, Nabil & Dauzère-Pérès, Stéphane & Kedad-Sidhoum, Safia & Penz, Bernard & Rapine, Christophe, 2016. "The single-item green lot-sizing problem with fixed carbon emissions," European Journal of Operational Research, Elsevier, vol. 248(3), pages 849-855.
    13. Liu, X. & Tu, Yl., 2008. "Production planning with limited inventory capacity and allowed stockout," International Journal of Production Economics, Elsevier, vol. 111(1), pages 180-191, January.
    14. Ming Zhao & Minjiao Zhang, 2020. "Multiechelon Lot Sizing: New Complexities and Inequalities," Operations Research, INFORMS, vol. 68(2), pages 534-551, March.
    15. Stan van Hoesel & H. Edwin Romeijn & Dolores Romero Morales & Albert P. M. Wagelmans, 2005. "Integrated Lot Sizing in Serial Supply Chains with Production Capacities," Management Science, INFORMS, vol. 51(11), pages 1706-1719, November.
    16. Xu, Xiaoping & He, Ping & Xu, Hao & Zhang, Quanpeng, 2017. "Supply chain coordination with green technology under cap-and-trade regulation," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 433-442.
    17. Atamturk, Alper & Munoz, Juan Carlos, 2002. "A Study of the Lot-Sizing Polytope," University of California Transportation Center, Working Papers qt6zz2g0z4, University of California Transportation Center.
    18. Chang, Xiangyun & Xia, Haiyang & Zhu, Huiyun & Fan, Tijun & Zhao, Hongqing, 2015. "Production decisions in a hybrid manufacturing–remanufacturing system with carbon cap and trade mechanism," International Journal of Production Economics, Elsevier, vol. 162(C), pages 160-173.
    19. Pan, Zhendong & Tang, Jiafu & Liu, Ou, 2009. "Capacitated dynamic lot sizing problems in closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 198(3), pages 810-821, November.
    20. Ping He & Guowei Dou & Wei Zhang, 2017. "Optimal production planning and cap setting under cap-and-trade regulation," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(9), pages 1094-1105, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores:v:251:y:2016:i:1:p:96-106. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.