IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v335y2023ics030626192300137x.html
   My bibliography  Save this article

New horizons in magnetic refrigeration using artificial intelligence

Author

Listed:
  • Chdil, O.
  • Bikerouin, M.
  • Balli, M.
  • Mounkachi, O.

Abstract

A number of magnetic refrigeration prototypes have been developed in recent years. Nevertheless, their optimization remains a challenging process. This paper presents an efficient approach based on artificial intelligence for optimizing the cooling performance of multi-layer active magnetic regenerators. To this end, a validated numerical model was used to predict the temperature difference between the hot and cold sources of a four-layer active magnetic regenerator. By using a nanofluid as a heat transfer fluid, the maximum temperature span of the device can be increased by approximately 20%. More importantly, by simultaneously optimizing a set of 10 key parameters, including the geometric parameters and the working conditions, the thermodynamic performance of the four-layer active magnetic regenerator prototype can be markedly enhanced by almost 40%. The newly established approach will be of considerable practical importance to both scientists and engineers since it will enable them to avoid costly experimental trials by optimizing a wide number of parameters.

Suggested Citation

  • Chdil, O. & Bikerouin, M. & Balli, M. & Mounkachi, O., 2023. "New horizons in magnetic refrigeration using artificial intelligence," Applied Energy, Elsevier, vol. 335(C).
    • Handle: RePEc:eee:appene:v:335:y:2023:i:c:s030626192300137x
    DOI: 10.1016/j.apenergy.2023.120773
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626192300137X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.120773?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kamran, Muhammad Sajid & Ahmad, Hafiz Ozair & Wang, Hua Sheng, 2020. "Review on the developments of active magnetic regenerator refrigerators – Evaluated by performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    2. Trevizoli, Paulo V. & Nakashima, Alan T. & Peixer, Guilherme F. & Barbosa, Jader R., 2017. "Performance assessment of different porous matrix geometries for active magnetic regenerators," Applied Energy, Elsevier, vol. 187(C), pages 847-861.
    3. Balli, M. & Sari, O. & Mahmed, C. & Besson, Ch. & Bonhote, Ph. & Duc, D. & Forchelet, J., 2012. "A pre-industrial magnetic cooling system for room temperature application," Applied Energy, Elsevier, vol. 98(C), pages 556-561.
    4. Luo, Dong & Feng, Yinshan & Verma, Parmesh, 2017. "Modeling and analysis of an integrated solid state elastocaloric heat pumping system," Energy, Elsevier, vol. 130(C), pages 500-514.
    5. Romero Gómez, J. & Ferreiro Garcia, R. & De Miguel Catoira, A. & Romero Gómez, M., 2013. "Magnetocaloric effect: A review of the thermodynamic cycles in magnetic refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 17(C), pages 74-82.
    6. Scarpa, Federico & Tagliafico, Giulio & Tagliafico, Luca A., 2015. "A classification methodology applied to existing room temperature magnetic refrigerators up to the year 2014," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 497-503.
    7. Zhang, Yaokang & Wu, Jianghong & He, Jing & Wang, Kai & Yu, Guoxin, 2021. "Solutions to obstacles in the commercialization of room-temperature magnetic refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    8. Silva, D.J. & Bordalo, B.D. & Pereira, A.M. & Ventura, J. & Araújo, J.P., 2012. "Solid state magnetic refrigerator," Applied Energy, Elsevier, vol. 93(C), pages 570-574.
    9. Saidur, R. & Leong, K.Y. & Mohammad, H.A., 2011. "A review on applications and challenges of nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(3), pages 1646-1668, April.
    10. Devendiran, Dhinesh Kumar & Amirtham, Valan Arasu, 2016. "A review on preparation, characterization, properties and applications of nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 21-40.
    11. Yang Liu & Lee C. Phillips & Richard Mattana & Manuel Bibes & Agnès Barthélémy & Brahim Dkhil, 2016. "Large reversible caloric effect in FeRh thin films via a dual-stimulus multicaloric cycle," Nature Communications, Nature, vol. 7(1), pages 1-6, September.
    12. Teyber, Reed & Holladay, Jamelyn & Meinhardt, Kerry & Polikarpov, Evgueni & Thomsen, Edwin & Cui, Jun & Rowe, Andrew & Barclay, John, 2019. "Performance investigation of a high-field active magnetic regenerator," Applied Energy, Elsevier, vol. 236(C), pages 426-436.
    13. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2018. "Solid-state refrigeration: A comparison of the energy performances of caloric materials operating in an active caloric regenerator," Energy, Elsevier, vol. 165(PA), pages 439-455.
    14. Ali Alahmer & Malik Al-Amayreh & Ahmad O. Mostafa & Mohammad Al-Dabbas & Hegazy Rezk, 2021. "Magnetic Refrigeration Design Technologies: State of the Art and General Perspectives," Energies, MDPI, vol. 14(15), pages 1-26, July.
    15. Silva, D.J. & Ventura, J. & Araújo, J.P. & Pereira, A.M., 2014. "Maximizing the temperature span of a solid state active magnetic regenerative refrigerator," Applied Energy, Elsevier, vol. 113(C), pages 1149-1154.
    16. Qian, Suxin & Yuan, Lifen & Yu, Jianlin & Yan, Gang, 2018. "Variable load control strategy for room-temperature magnetocaloric cooling applications," Energy, Elsevier, vol. 153(C), pages 763-775.
    17. Ben Seddik, Z. & Ben Taher, M.A. & Laknizi, A. & Ahachad, M. & Bahraoui, F. & Mahdaoui, M., 2022. "Hybridization of Taguchi method and genetic algorithm to optimize a PVT in different Moroccan climatic zones," Energy, Elsevier, vol. 250(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Yaokang & Wu, Jianghong & He, Jing & Wang, Kai & Yu, Guoxin, 2021. "Solutions to obstacles in the commercialization of room-temperature magnetic refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    2. Ismail, A. & Perrin, M. & Giurgea, S. & Bailly, Y. & Roy, J.C. & Barriere, T., 2022. "Multiphysical and multidimensional modelling of Parallel-Plate active magnetic regenerator," Applied Energy, Elsevier, vol. 314(C).
    3. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2020. "The use of barocaloric effect for energy saving in a domestic refrigerator with ethylene-glycol based nanofluids: A numerical analysis and a comparison with a vapor compression cooler," Energy, Elsevier, vol. 190(C).
    4. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2018. "Solid-state refrigeration: A comparison of the energy performances of caloric materials operating in an active caloric regenerator," Energy, Elsevier, vol. 165(PA), pages 439-455.
    5. Tan, Jianming & Wang, Yao & Xu, Shijie & Liu, Huaican & Qian, Suxin, 2020. "Thermodynamic cycle analysis of heat driven elastocaloric cooling system," Energy, Elsevier, vol. 197(C).
    6. Ranga Babu, J.A. & Kumar, K. Kiran & Srinivasa Rao, S., 2017. "State-of-art review on hybrid nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 551-565.
    7. Silva, D.J. & Ventura, J. & Araújo, J.P. & Pereira, A.M., 2014. "Maximizing the temperature span of a solid state active magnetic regenerative refrigerator," Applied Energy, Elsevier, vol. 113(C), pages 1149-1154.
    8. Wu, Xi & Xu, Shiming & Jiang, Mengnan, 2018. "Development of bubble absorption refrigeration technology: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3468-3482.
    9. Eleonora Ponticorvo & Mariagrazia Iuliano & Claudia Cirillo & Angelo Maiorino & Ciro Aprea & Maria Sarno, 2022. "Fouling Behavior and Dispersion Stability of Nanoparticle-Based Refrigeration Fluid," Energies, MDPI, vol. 15(9), pages 1-21, April.
    10. Limei Shen & Xiao Tong & Liang Li & Yiliang Lv & Zeyu Liu & Junlong Xie, 2022. "Performance Simulation of the Active Magnetic Regenerator under a Pulsed Magnetic Field," Energies, MDPI, vol. 15(18), pages 1-13, September.
    11. Lozano, J.A. & Engelbrecht, K. & Bahl, C.R.H. & Nielsen, K.K. & Eriksen, D. & Olsen, U.L. & Barbosa, J.R. & Smith, A. & Prata, A.T. & Pryds, N., 2013. "Performance analysis of a rotary active magnetic refrigerator," Applied Energy, Elsevier, vol. 111(C), pages 669-680.
    12. Hesam Moghadasi & Navid Malekian & Hamid Saffari & Amir Mirza Gheitaghy & Guo Qi Zhang, 2020. "Recent Advances in the Critical Heat Flux Amelioration of Pool Boiling Surfaces Using Metal Oxide Nanoparticle Deposition," Energies, MDPI, vol. 13(15), pages 1-49, August.
    13. Kamran, Muhammad Sajid & Ahmad, Hafiz Ozair & Wang, Hua Sheng, 2020. "Review on the developments of active magnetic regenerator refrigerators – Evaluated by performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    14. Ahmad, S.H.A. & Saidur, R. & Mahbubul, I.M. & Al-Sulaiman, F.A., 2017. "Optical properties of various nanofluids used in solar collector: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1014-1030.
    15. Fernandes, C.R. & Silva, D.J. & Pereira, A.M. & Ventura, J.O., 2022. "Numerical simulation and optimization of a solid state thermal diode based on shape-memory alloys," Energy, Elsevier, vol. 255(C).
    16. Romero Gómez, J. & Ferreiro Garcia, R. & Carbia Carril, J. & Romero Gómez, M., 2013. "A review of room temperature linear reciprocating magnetic refrigerators," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 1-12.
    17. Leong, K.Y. & Ku Ahmad, K.Z. & Ong, Hwai Chyuan & Ghazali, M.J. & Baharum, Azizah, 2017. "Synthesis and thermal conductivity characteristic of hybrid nanofluids – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 868-878.
    18. Islam, Mohammad Rafiqul & Shabani, Bahman & Rosengarten, Gary, 2016. "Nanofluids to improve the performance of PEM fuel cell cooling systems: A theoretical approach," Applied Energy, Elsevier, vol. 178(C), pages 660-671.
    19. Elsheikh, A.H. & Sharshir, S.W. & Mostafa, Mohamed E. & Essa, F.A. & Ahmed Ali, Mohamed Kamal, 2018. "Applications of nanofluids in solar energy: A review of recent advances," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3483-3502.
    20. Ali Alahmer & Malik Al-Amayreh & Ahmad O. Mostafa & Mohammad Al-Dabbas & Hegazy Rezk, 2021. "Magnetic Refrigeration Design Technologies: State of the Art and General Perspectives," Energies, MDPI, vol. 14(15), pages 1-26, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:335:y:2023:i:c:s030626192300137x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.