IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v197y2020ics0360544220303686.html
   My bibliography  Save this article

Thermodynamic cycle analysis of heat driven elastocaloric cooling system

Author

Listed:
  • Tan, Jianming
  • Wang, Yao
  • Xu, Shijie
  • Liu, Huaican
  • Qian, Suxin

Abstract

The conventional elastocaloric cooling system is powered by mechanical drivers with more than 500 times mass over refrigerant mass, whereas the shape memory alloy actuator and heat driven cycle provide a new path for higher system compactness. Based on the thermodynamic and mechanical constraints between the actuator shape memory alloy and the refrigerant super-elastic alloy, the cycle model is implemented to investigate the characteristics of the cycle efficiency, mass ratio and driving temperature difference in terms of length ratio and cross-sectional area ratio. In addition, the impacts of Young’s modulus, transformation strain and Clausius-Clapeyron coefficient are studied. Based on the multi-objective optimization technique, regarding the three different combinations of actuator and refrigerant materials, the optimum normalized COP occurs when the MDTD ranges from 52 K to 59 K, which does not further increase with higher driving temperature, implying that low-grade thermal energy at a temperature less than 100 °C is most economic to drive such a cycle. On the other hand, the heat driven cycle can be activated by MDTD down to 11 K, indicating a significant potential to harvest low-grade thermal energy. This study can promote future prototype development for solar-driven refrigerators and waste heat recovery for electronic devices.

Suggested Citation

  • Tan, Jianming & Wang, Yao & Xu, Shijie & Liu, Huaican & Qian, Suxin, 2020. "Thermodynamic cycle analysis of heat driven elastocaloric cooling system," Energy, Elsevier, vol. 197(C).
    • Handle: RePEc:eee:energy:v:197:y:2020:i:c:s0360544220303686
    DOI: 10.1016/j.energy.2020.117261
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220303686
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117261?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qian, Suxin & Yuan, Lifen & Yu, Jianlin & Yan, Gang, 2017. "Numerical modeling of an active elastocaloric regenerator refrigerator with phase transformation kinetics and the matching principle for materials selection," Energy, Elsevier, vol. 141(C), pages 744-756.
    2. Luo, Dong & Feng, Yinshan & Verma, Parmesh, 2017. "Modeling and analysis of an integrated solid state elastocaloric heat pumping system," Energy, Elsevier, vol. 130(C), pages 500-514.
    3. Huilong Hou & Peter Finkel & Margo Staruch & Jun Cui & Ichiro Takeuchi, 2018. "Ultra-low-field magneto-elastocaloric cooling in a multiferroic composite device," Nature Communications, Nature, vol. 9(1), pages 1-8, December.
    4. Qian, Suxin & Wang, Yao & Yuan, Lifen & Yu, Jianlin, 2019. "A heat driven elastocaloric cooling system," Energy, Elsevier, vol. 182(C), pages 881-899.
    5. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2018. "Solid-state refrigeration: A comparison of the energy performances of caloric materials operating in an active caloric regenerator," Energy, Elsevier, vol. 165(PA), pages 439-455.
    6. Qian, Suxin & Yu, Jianlin & Yan, Gang, 2017. "A review of regenerative heat exchange methods for various cooling technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 535-550.
    7. Jaka Tušek & Kurt Engelbrecht & Dan Eriksen & Stefano Dall’Olio & Janez Tušek & Nini Pryds, 2016. "A regenerative elastocaloric heat pump," Nature Energy, Nature, vol. 1(10), pages 1-6, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lu, Zhen & Huang, Yuewu & Zhao, Yonggang, 2023. "Elastocaloric cooler for waste heat recovery from perovskite solar cell with electricity and cooling production," Renewable Energy, Elsevier, vol. 215(C).
    2. Žiga Ahčin & Parham Kabirifar & Luka Porenta & Miha Brojan & Jaka Tušek, 2022. "Numerical Modeling of Shell-and-Tube-like Elastocaloric Regenerator," Energies, MDPI, vol. 15(23), pages 1-28, December.
    3. Han, Yuan & Zhang, Houcheng, 2022. "Potentiality of elastocaloric cooling system for high-temperature proton exchange membrane fuel cell waste heat harvesting," Renewable Energy, Elsevier, vol. 200(C), pages 1166-1179.
    4. Jongchansitto, P. & Yachai, T. & Preechawuttipong, I. & Boufayed, R. & Balandraud, X., 2021. "Concept of mechanocaloric granular material made from shape memory alloy," Energy, Elsevier, vol. 219(C).
    5. Qian, Suxin & Wang, Yao & Xu, Shijie & Chen, Yanliang & Yuan, Lifen & Yu, Jianlin, 2021. "Cascade utilization of low-grade thermal energy by coupled elastocaloric power and cooling cycle," Applied Energy, Elsevier, vol. 298(C).
    6. Han, Yuan & Lai, Cong & Li, Jiarui & Zhang, Zhufeng & Zhang, Houcheng & Hou, Shujin & Wang, Fu & Zhao, Jiapei & Zhang, Chunfei & Miao, He & Yuan, Jinliang, 2022. "Elastocaloric cooler for waste heat recovery from proton exchange membrane fuel cells," Energy, Elsevier, vol. 238(PA).
    7. Ma, Liuyang & Zhao, Qin & Zhang, Houcheng & Hou, Shujin & Zhao, Jiapei & Wang, Fu & Zhang, Chunfei & Miao, He & Yuan, Jinliang, 2022. "Performance analysis of a concentrated photovoltaic cell-elastocaloric cooler hybrid system for power and cooling cogeneration," Energy, Elsevier, vol. 239(PD).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Han, Yuan & Lai, Cong & Li, Jiarui & Zhang, Zhufeng & Zhang, Houcheng & Hou, Shujin & Wang, Fu & Zhao, Jiapei & Zhang, Chunfei & Miao, He & Yuan, Jinliang, 2022. "Elastocaloric cooler for waste heat recovery from proton exchange membrane fuel cells," Energy, Elsevier, vol. 238(PA).
    2. Han, Yuan & Zhang, Houcheng, 2022. "Potentiality of elastocaloric cooling system for high-temperature proton exchange membrane fuel cell waste heat harvesting," Renewable Energy, Elsevier, vol. 200(C), pages 1166-1179.
    3. Žiga Ahčin & Parham Kabirifar & Luka Porenta & Miha Brojan & Jaka Tušek, 2022. "Numerical Modeling of Shell-and-Tube-like Elastocaloric Regenerator," Energies, MDPI, vol. 15(23), pages 1-28, December.
    4. Lu, Zhen & Huang, Yuewu & Zhao, Yonggang, 2023. "Elastocaloric cooler for waste heat recovery from perovskite solar cell with electricity and cooling production," Renewable Energy, Elsevier, vol. 215(C).
    5. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2020. "The use of barocaloric effect for energy saving in a domestic refrigerator with ethylene-glycol based nanofluids: A numerical analysis and a comparison with a vapor compression cooler," Energy, Elsevier, vol. 190(C).
    6. Aprea, C. & Greco, A. & Maiorino, A. & Masselli, C., 2018. "Solid-state refrigeration: A comparison of the energy performances of caloric materials operating in an active caloric regenerator," Energy, Elsevier, vol. 165(PA), pages 439-455.
    7. Jongchansitto, P. & Yachai, T. & Preechawuttipong, I. & Boufayed, R. & Balandraud, X., 2021. "Concept of mechanocaloric granular material made from shape memory alloy," Energy, Elsevier, vol. 219(C).
    8. Mubarak Ismail & Metkel Yebiyo & Issa Chaer, 2021. "A Review of Recent Advances in Emerging Alternative Heating and Cooling Technologies," Energies, MDPI, vol. 14(2), pages 1-24, January.
    9. Chdil, O. & Bikerouin, M. & Balli, M. & Mounkachi, O., 2023. "New horizons in magnetic refrigeration using artificial intelligence," Applied Energy, Elsevier, vol. 335(C).
    10. Qian, Suxin & Yao, Sijia & Wang, Yao & Yuan, Lifen & Yu, Jianlin, 2022. "Harvesting low-grade heat by coupling regenerative shape-memory actuator and piezoelectric generator," Applied Energy, Elsevier, vol. 322(C).
    11. Luo, Dong & Feng, Yinshan & Verma, Parmesh, 2017. "Modeling and analysis of an integrated solid state elastocaloric heat pumping system," Energy, Elsevier, vol. 130(C), pages 500-514.
    12. Zhu, Yuxiang & Zhou, Guoan & Cheng, Siyuan & Sun, Qingping & Yao, Shuhuai, 2023. "A numerical study of elastocaloric regenerators of tubular structures," Applied Energy, Elsevier, vol. 339(C).
    13. Qian, Suxin & Wang, Yao & Xu, Shijie & Chen, Yanliang & Yuan, Lifen & Yu, Jianlin, 2021. "Cascade utilization of low-grade thermal energy by coupled elastocaloric power and cooling cycle," Applied Energy, Elsevier, vol. 298(C).
    14. Jafari, Davoud & Wits, Wessel W., 2018. "The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 420-442.
    15. Ismail, A. & Perrin, M. & Giurgea, S. & Bailly, Y. & Roy, J.C. & Barriere, T., 2022. "Multiphysical and multidimensional modelling of Parallel-Plate active magnetic regenerator," Applied Energy, Elsevier, vol. 314(C).
    16. Ciro Aprea & Adriana Greco & Angelo Maiorino & Claudia Masselli, 2019. "Enhancing the Heat Transfer in an Active Barocaloric Cooling System Using Ethylene-Glycol Based Nanofluids as Secondary Medium," Energies, MDPI, vol. 12(15), pages 1-15, July.
    17. Kristina Navickaitė & Michael Penzel & Christian Bahl & Kurt Engelbrecht & Jaka Tušek & André Martin & Mike Zinecker & Andreas Schubert, 2020. "CFD-Simulation Assisted Design of Elastocaloric Regenerator Geometry," Sustainability, MDPI, vol. 12(21), pages 1-16, October.
    18. Wang, Hanbin & Luo, Chunhuan & Zhang, Rudan & Li, Yongsheng & Yang, Changchang & Li, Zexiang & Li, Jianhao & Li, Na & Li, Yiqun & Su, Qingquan, 2023. "Experiment and performance evaluation of an integrated low-temperature proton exchange membrane fuel cell system with an absorption chiller," Renewable Energy, Elsevier, vol. 215(C).
    19. Zhao, Weiwei & Zhang, Tongtong & Kildahl, Harriet & Ding, Yulong, 2022. "Mobile energy recovery and storage: Multiple energy-powered EVs and refuelling stations," Energy, Elsevier, vol. 257(C).
    20. Johra, Hicham & Filonenko, Konstantin & Heiselberg, Per & Veje, Christian & Dall’Olio, Stefano & Engelbrecht, Kurt & Bahl, Christian, 2019. "Integration of a magnetocaloric heat pump in an energy flexible residential building," Renewable Energy, Elsevier, vol. 136(C), pages 115-126.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:197:y:2020:i:c:s0360544220303686. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.