IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v280y2020ics0306261920313660.html
   My bibliography  Save this article

A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks

Author

Listed:
  • Zeng, Zezhi
  • Qian, Yuping
  • Zhang, Yangjun
  • Hao, Changkun
  • Dan, Dan
  • Zhuge, Weilin

Abstract

Solid oxide fuel cell (SOFC) stacks are promising power generation devices due to their high efficiency and flexible fuel capability. Recent application of SOFC stacks has shifted from stationary electricity generation into powering vehicles and airplanes. The start-up process of compact SOFC stacks for mobile power systems requires a rapid temperature rise from 20 °C to approximately 800 °C. Effective thermal management systems are necessary for the stable start-up process as well as stable operations of SOFC stacks. This paper presents a detailed review on the heat transfer studies of SOFC and the associated thermal management methods. Previous studies have indicated that the temperature gradient in the SOFC could lead to delamination and cracks in the electrolyte and electrode. Thus, we listed the temperature gradient for different types of SOFC and summarized the commonly used thermal management methods for temperature gradient reduction in SOFC stacks, such as designing proper gas channels, using effective flow arrangements, integrating heat pipes into interconnects, and adjusting fuel compositions. The suggestions for future studies related to thermal management of SOFC are also provided. This review helps improve our understanding of the heat transfer mechanisms in SOFC and inspire researchers to design effective thermal management systems for SOFC stacks.

Suggested Citation

  • Zeng, Zezhi & Qian, Yuping & Zhang, Yangjun & Hao, Changkun & Dan, Dan & Zhuge, Weilin, 2020. "A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks," Applied Energy, Elsevier, vol. 280(C).
    • Handle: RePEc:eee:appene:v:280:y:2020:i:c:s0306261920313660
    DOI: 10.1016/j.apenergy.2020.115899
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920313660
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.115899?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Razbani, Omid & Wærnhus, Ivar & Assadi, Mohsen, 2013. "Experimental investigation of temperature distribution over a planar solid oxide fuel cell," Applied Energy, Elsevier, vol. 105(C), pages 155-160.
    2. Li, Ang & Song, Ce & Lin, Zijing, 2017. "A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks," Applied Energy, Elsevier, vol. 190(C), pages 1234-1244.
    3. Chiang, Lieh-Kwang & Liu, Hui-Chung & Shiu, Yao-Hua & Lee, Chien-Hsiung & Lee, Ryey-Yi, 2008. "Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell," Renewable Energy, Elsevier, vol. 33(12), pages 2580-2588.
    4. Chen, Bin & Xu, Haoran & Tan, Peng & Zhang, Yuan & Xu, Xiaoming & Cai, Weizi & Chen, Meina & Ni, Meng, 2019. "Thermal modelling of ethanol-fuelled Solid Oxide Fuel Cells," Applied Energy, Elsevier, vol. 237(C), pages 476-486.
    5. Zeng, Hongyu & Wang, Yuqing & Shi, Yixiang & Cai, Ningsheng & Yuan, Dazhong, 2018. "Highly thermal integrated heat pipe-solid oxide fuel cell," Applied Energy, Elsevier, vol. 216(C), pages 613-619.
    6. Xu, Haoran & Chen, Bin & Liu, Jiang & Ni, Meng, 2016. "Modeling of direct carbon solid oxide fuel cell for CO and electricity cogeneration," Applied Energy, Elsevier, vol. 178(C), pages 353-362.
    7. Khazaee, I. & Rava, A., 2017. "Numerical simulation of the performance of solid oxide fuel cell with different flow channel geometries," Energy, Elsevier, vol. 119(C), pages 235-244.
    8. Iwai, H. & Yamamoto, Y. & Saito, M. & Yoshida, H., 2011. "Numerical simulation of intermediate-temperature direct-internal-reforming planar solid oxide fuel cell," Energy, Elsevier, vol. 36(4), pages 2225-2234.
    9. Fardadi, Mahshid & McLarty, Dustin F. & Jabbari, Faryar, 2016. "Investigation of thermal control for different SOFC flow geometries," Applied Energy, Elsevier, vol. 178(C), pages 43-55.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Promsen, Mungmuang & Komatsu, Yosuke & Sciazko, Anna & Kaneko, Shozo & Shikazono, Naoki, 2023. "Power maximization and load range extension of solid oxide fuel cell operation by water cooling," Energy, Elsevier, vol. 276(C).
    2. Jiamiao Xie & Jingyang Li & Wenqian Hao & Fenghui Wang, 2023. "Influence of Interface Morphology on the Thermal Stress Distribution of SOFC under Inhomogeneous Temperature Field," Energies, MDPI, vol. 16(21), pages 1-13, October.
    3. Francesco Calise & Francesco Liberato Cappiello & Luca Cimmino & Massimo Dentice d’Accadia & Maria Vicidomini, 2021. "Dynamic Simulation and Thermoeconomic Analysis of a Hybrid Renewable System Based on PV and Fuel Cell Coupled with Hydrogen Storage," Energies, MDPI, vol. 14(22), pages 1-20, November.
    4. Li, Jiawen & Yu, Tao & Yang, Bo, 2021. "A data-driven output voltage control of solid oxide fuel cell using multi-agent deep reinforcement learning," Applied Energy, Elsevier, vol. 304(C).
    5. Anselma, Pier Giuseppe & Belingardi, Giovanni, 2022. "Fuel cell electrified propulsion systems for long-haul heavy-duty trucks: present and future cost-oriented sizing," Applied Energy, Elsevier, vol. 321(C).
    6. Yuhang Liu & Jinyi Liu & Lirong Fu & Qiao Wang, 2024. "Numerical Study on Effects of Flow Channel Length on Solid Oxide Fuel Cell-Integrated System Performances," Sustainability, MDPI, vol. 16(4), pages 1-22, February.
    7. Liang, Bo & Yao, Yue & Guo, Jin & Yang, Huazheng & Liang, Jiajiang & Zhao, Zhijiang & Wu, Gang & Zhan, Yuedong & Zhao, Xiaobo & Tao, Tao & Yao, Yingbang & Lu, Shengguo & Ruirui, Zhao, 2022. "Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window," Applied Energy, Elsevier, vol. 309(C).
    8. Chuang Sheng & Yi Zheng & Rui Tian & Qian Xiang & Zhonghua Deng & Xiaowei Fu & Xi Li, 2023. "A Comparative Study of the Kalman Filter and the LSTM Network for the Remaining Useful Life Prediction of SOFC," Energies, MDPI, vol. 16(9), pages 1-16, April.
    9. Zhao, Lei & Yuan, Hao & Xie, Jiaping & Jiang, Shangfeng & Wei, Xuezhe & Tang, Wei & Ming, Pingwen & Dai, Haifeng, 2023. "Inconsistency evaluation of vehicle-oriented fuel cell stacks based on electrochemical impedance under dynamic operating conditions," Energy, Elsevier, vol. 265(C).
    10. Zhao, Lei & Hong, Jichao & Xie, Jiaping & Jiang, Shangfeng & Wei, Xuezhe & Ming, Pingwen & Dai, Haifeng, 2023. "Investigation of local sensitivity for vehicle-oriented fuel cell stacks based on electrochemical impedance spectroscopy," Energy, Elsevier, vol. 262(PA).
    11. Yin, Linfei & Liu, Dongduan, 2023. "Adaptive multistep model predictive control for tubular grid-connected solid oxide fuel cells," Renewable Energy, Elsevier, vol. 216(C).
    12. Xia, Zhiping & Zhao, Dongqi & Li, Yuanzheng & Deng, Zhonghua & Kupecki, Jakub & Fu, Xiaowei & Li, Xi, 2023. "Control-oriented dynamic process optimization of solid oxide electrolysis cell system with the gas characteristic regarding oxygen electrode delamination," Applied Energy, Elsevier, vol. 332(C).
    13. Ouyang, Tiancheng & Zhao, Zhongkai & Zhang, Mingliang & Xie, Shutao & Wang, Zhiping, 2022. "A micro off-grid power solution for solid oxide fuel cell waste heat reusing enabled peak load shifting by integrating compressed-air energy storage," Applied Energy, Elsevier, vol. 323(C).
    14. Cheng, Gong & Wang, Zhangzhou & Wang, Xinzhi & He, Yurong, 2022. "All-climate thermal management structure for batteries based on expanded graphite/polymer composite phase change material with a high thermal and electrical conductivity," Applied Energy, Elsevier, vol. 322(C).
    15. Wang, Yang & Wu, Chengru & Zhao, Siyuan & Wang, Jian & Zu, Bingfeng & Han, Minfang & Du, Qing & Ni, Meng & Jiao, Kui, 2022. "Coupling deep learning and multi-objective genetic algorithms to achieve high performance and durability of direct internal reforming solid oxide fuel cell," Applied Energy, Elsevier, vol. 315(C).
    16. Abdellah Essaghouri & Zezhi Zeng & Bingguo Zhao & Changkun Hao & Yuping Qian & Weilin Zhuge & Yangjun Zhang, 2022. "Influence of Radial Flows on Power Density and Gas Stream Pressure Drop of Tubular Solid Oxide Fuel Cells," Energies, MDPI, vol. 15(21), pages 1-21, October.
    17. Gong, Chengyuan & Tu, Zhengkai & Hwa Chan, Siew, 2023. "A novel flow field design with flow re-distribution for advanced thermal management in Solid oxide fuel cell," Applied Energy, Elsevier, vol. 331(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gong, Chengyuan & Tu, Zhengkai & Hwa Chan, Siew, 2023. "A novel flow field design with flow re-distribution for advanced thermal management in Solid oxide fuel cell," Applied Energy, Elsevier, vol. 331(C).
    2. Promsen, Mungmuang & Komatsu, Yosuke & Sciazko, Anna & Kaneko, Shozo & Shikazono, Naoki, 2020. "Feasibility study on saturated water cooled solid oxide fuel cell stack," Applied Energy, Elsevier, vol. 279(C).
    3. Guk, Erdogan & Kim, Jung-Sik & Ranaweera, Manoj & Venkatesan, Vijay & Jackson, Lisa, 2018. "In-situ monitoring of temperature distribution in operating solid oxide fuel cell cathode using proprietary sensory techniques versus commercial thermocouples," Applied Energy, Elsevier, vol. 230(C), pages 551-562.
    4. Promsen, Mungmuang & Komatsu, Yosuke & Sciazko, Anna & Kaneko, Shozo & Shikazono, Naoki, 2023. "Power maximization and load range extension of solid oxide fuel cell operation by water cooling," Energy, Elsevier, vol. 276(C).
    5. Zhu, Pengfei & Wu, Zhen & Yang, Yuchen & Wang, Huan & Li, Ruiqing & Yang, Fusheng & Zhang, Zaoxiao, 2023. "The dynamic response of solid oxide fuel cell fueled by syngas during the operating condition variations," Applied Energy, Elsevier, vol. 349(C).
    6. Li, Ang & Song, Ce & Lin, Zijing, 2017. "A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks," Applied Energy, Elsevier, vol. 190(C), pages 1234-1244.
    7. Silva-Mosqueda, Dulce María & Elizalde-Blancas, Francisco & Pumiglia, Davide & Santoni, Francesca & Boigues-Muñoz, Carlos & McPhail, Stephen J., 2019. "Intermediate temperature solid oxide fuel cell under internal reforming: Critical operating conditions, associated problems and their impact on the performance," Applied Energy, Elsevier, vol. 235(C), pages 625-640.
    8. Zeng, Hongyu & Wang, Yuqing & Shi, Yixiang & Cai, Ningsheng & Yuan, Dazhong, 2018. "Highly thermal integrated heat pipe-solid oxide fuel cell," Applied Energy, Elsevier, vol. 216(C), pages 613-619.
    9. Zaghloul, Mohamed A.S. & Mason, Jerry H. & Wang, Mohan & Buric, Michael & Peng, Zhaoqiang & Lee, Shiwoo & Ohodnicki, Paul & Abernathy, Harry & Chen, Kevin Peng, 2021. "High spatial resolution temperature profile measurements of solid-oxide fuel cells," Applied Energy, Elsevier, vol. 288(C).
    10. Marocco, Paolo & Ferrero, Domenico & Lanzini, Andrea & Santarelli, Massimo, 2019. "Benefits from heat pipe integration in H2/H2O fed SOFC systems," Applied Energy, Elsevier, vol. 241(C), pages 472-482.
    11. Abdellah Essaghouri & Zezhi Zeng & Bingguo Zhao & Changkun Hao & Yuping Qian & Weilin Zhuge & Yangjun Zhang, 2022. "Effects of Radial and Circumferential Flows on Power Density Improvements of Tubular Solid Oxide Fuel Cells," Energies, MDPI, vol. 15(19), pages 1-21, September.
    12. Xu, Qidong & Xia, Lingchao & He, Qijiao & Guo, Zengjia & Ni, Meng, 2021. "Thermo-electrochemical modelling of high temperature methanol-fuelled solid oxide fuel cells," Applied Energy, Elsevier, vol. 291(C).
    13. Guk, Erdogan & Ranaweera, Manoj & Venkatesan, Vijay & Kim, Jung-Sik & Jung, WooChul, 2020. "In-situ temperature monitoring directly from cathode surface of an operating solid oxide fuel cell," Applied Energy, Elsevier, vol. 280(C).
    14. Abdellah Essaghouri & Zezhi Zeng & Bingguo Zhao & Changkun Hao & Yuping Qian & Weilin Zhuge & Yangjun Zhang, 2022. "Influence of Radial Flows on Power Density and Gas Stream Pressure Drop of Tubular Solid Oxide Fuel Cells," Energies, MDPI, vol. 15(21), pages 1-21, October.
    15. Rashid, Kashif & Dong, Sang Keun & Mehran, Muhammad Taqi, 2017. "Numerical investigations to determine the optimal operating conditions for 1 kW-class flat-tubular solid oxide fuel cell stack," Energy, Elsevier, vol. 141(C), pages 673-691.
    16. Tanaka, T. & Inui, Y. & Pongratz, G. & Subotić, V. & Hochenauer, C., 2021. "Numerical investigation on the performance and detection of an industrial-sized planar solid oxide fuel cell with fuel gas leakage," Applied Energy, Elsevier, vol. 285(C).
    17. Shao, Qian & Gao, Enlai & Mara, Thierry & Hu, Heng & Liu, Tong & Makradi, Ahmed, 2020. "Global sensitivity analysis of solid oxide fuel cells with Bayesian sparse polynomial chaos expansions," Applied Energy, Elsevier, vol. 260(C).
    18. Li, Bangxin & Irvine, John T.S. & Ni, Jiupai & Ni, Chengsheng, 2022. "High-performance and durable alcohol-fueled symmetrical solid oxide fuel cell based on ferrite perovskite electrode," Applied Energy, Elsevier, vol. 306(PB).
    19. Guo, Meiting & Ru, Xiao & Yang, Lin & Ni, Meng & Lin, Zijing, 2022. "Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack," Applied Energy, Elsevier, vol. 322(C).
    20. Kishimoto, Masashi & Kishida, Shohei & Seo, Haewon & Iwai, Hiroshi & Yoshida, Hideo, 2021. "Prediction of electrochemical characteristics of practical-size solid oxide fuel cells based on database of unit cell performance," Applied Energy, Elsevier, vol. 283(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:280:y:2020:i:c:s0306261920313660. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.