IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v277y2020ics030626192031117x.html
   My bibliography  Save this article

Origami microfluidics for radiant cooling with small temperature differences in buildings

Author

Listed:
  • Grinham, Jonathan
  • Craig, Salmaan
  • Ingber, Donald E.
  • Bechthold, Martin

Abstract

Design and fabrication methods translated from microfluidics, microelectromechanical systems, origami, and biologically inspired engineering may offer efficiency improvements for water-based thermoregulation in buildings. This paper introduces foldable radiant cooling devices that are fabricated by lamination with integrated microfluidic water-circuits. These devices produce more surface convection because of their geometry and because they have more surface area than flat panels. As a result, lukewarm water instead of chilled water may be sufficient for cooling a room, leading to potential savings in primary energy use and lifecycle greenhouse gas emissions. Analytical models and physical experiments show a 55–67% improvement in thermal performance when comparing these novel folded surfaces to flat surfaces, mainly due to the improved convection heat transfer.

Suggested Citation

  • Grinham, Jonathan & Craig, Salmaan & Ingber, Donald E. & Bechthold, Martin, 2020. "Origami microfluidics for radiant cooling with small temperature differences in buildings," Applied Energy, Elsevier, vol. 277(C).
  • Handle: RePEc:eee:appene:v:277:y:2020:i:c:s030626192031117x
    DOI: 10.1016/j.apenergy.2020.115610
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626192031117X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2020.115610?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Meggers, Forrest & Ritter, Volker & Goffin, Philippe & Baetschmann, Marc & Leibundgut, Hansjürg, 2012. "Low exergy building systems implementation," Energy, Elsevier, vol. 41(1), pages 48-55.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Wanhe & Yin, Yonggao & Zhao, Xingwang & Fan, Fangsu & Cao, Bowen & Ji, Qiang & Xu, Guoying, 2023. "Sepiolite based humidity-control coating specially for alleviate the condensation problem of radiant cooling panel," Energy, Elsevier, vol. 272(C).
    2. Tyler R. Stevens & Nathan B. Crane & Rydge B. Mulford, 2023. "Topology Morphing Insulation: A Review of Technologies and Energy Performance in Dynamic Building Insulation," Energies, MDPI, vol. 16(19), pages 1-38, October.
    3. Mohammad Hakim Mohd Radzai & Chong Tak Yaw & Chin Wai Lim & Siaw Paw Koh & Nur Amirani Ahmad, 2021. "Numerical Analysis on the Performance of a Radiant Cooling Panel with Serpentine-Based Design," Energies, MDPI, vol. 14(16), pages 1-20, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Graamans, Luuk & Baeza, Esteban & van den Dobbelsteen, Andy & Tsafaras, Ilias & Stanghellini, Cecilia, 2018. "Plant factories versus greenhouses: Comparison of resource use efficiency," Agricultural Systems, Elsevier, vol. 160(C), pages 31-43.
    2. Gábor L. Szabó, 2020. "Thermo-Chemical Instability and Energy Analysis of Absorption Heat Pumps," Energies, MDPI, vol. 13(8), pages 1-13, April.
    3. Belen Moreno Santamaria & Fernando del Ama Gonzalo & Danielle Pinette & Roberto-Alonso Gonzalez-Lezcano & Benito Lauret Aguirregabiria & Juan A. Hernandez Ramos, 2020. "Application and Validation of a Dynamic Energy Simulation Tool: A Case Study with Water Flow Glazing Envelope," Energies, MDPI, vol. 13(12), pages 1-20, June.
    4. Zahra Fallahi & Gregor P. Henze, 2019. "Interactive Buildings: A Review," Sustainability, MDPI, vol. 11(14), pages 1-26, July.
    5. Luo, Yongqiang & Zhang, Ling & Liu, Zhongbing & Wu, Jing & Zhang, Yelin & Wu, Zhenghong & He, Xihua, 2017. "Performance analysis of a self-adaptive building integrated photovoltaic thermoelectric wall system in hot summer and cold winter zone of China," Energy, Elsevier, vol. 140(P1), pages 584-600.
    6. Wenting Ma & Moon Keun Kim & Jianli Hao, 2019. "Numerical Simulation Modeling of a GSHP and WSHP System for an Office Building in the Hot Summer and Cold Winter Region of China: A Case Study in Suzhou," Sustainability, MDPI, vol. 11(12), pages 1-17, June.
    7. Marcel Bruelisauer & Kian Wee Chen & Rupesh Iyengar & Hansjürg Leibundgut & Cheng Li & Mo Li & Matthias Mast & Forrest Meggers & Clayton Miller & Dino Rossi & Esmail M. Saber & Kwok Wai Tham & Arno Sc, 2013. "BubbleZERO—Design, Construction and Operation of a Transportable Research Laboratory for Low Exergy Building System Evaluation in the Tropics," Energies, MDPI, vol. 6(9), pages 1-21, September.
    8. Ziya Sogut, M., 2012. "Exergetic and environmental assessment of room air conditioners in Turkish market," Energy, Elsevier, vol. 46(1), pages 32-41.
    9. Graamans, Luuk & Tenpierik, Martin & van den Dobbelsteen, Andy & Stanghellini, Cecilia, 2020. "Plant factories: Reducing energy demand at high internal heat loads through façade design," Applied Energy, Elsevier, vol. 262(C).
    10. Birol Kılkış & Şiir Kılkış, 2018. "Hydrogen Economy Model for Nearly Net-Zero Cities with Exergy Rationale and Energy-Water Nexus," Energies, MDPI, vol. 11(5), pages 1-33, May.
    11. Massimiliano Manfren & Benedetto Nastasi, 2020. "Parametric Performance Analysis and Energy Model Calibration Workflow Integration—A Scalable Approach for Buildings," Energies, MDPI, vol. 13(3), pages 1-14, February.
    12. Szabó, Gábor L. & Kalmár, Ferenc, 2019. "Investigation of energy and exergy performances of radiant cooling systems in buildings – A design approach," Energy, Elsevier, vol. 185(C), pages 449-462.
    13. Martin N. Nwodo & Chimay J. Anumba, 2020. "Exergetic Life Cycle Assessment: A Review," Energies, MDPI, vol. 13(11), pages 1-19, May.
    14. Bertrand, Alexandre & Aggoune, Riad & Maréchal, François, 2017. "In-building waste water heat recovery: An urban-scale method for the characterisation of water streams and the assessment of energy savings and costs," Applied Energy, Elsevier, vol. 192(C), pages 110-125.
    15. Forrest Meggers & Luca Baldini & Hansjürg Leibundgut, 2012. "An Innovative Use of Renewable Ground Heat for Insulation in Low Exergy Building Systems," Energies, MDPI, vol. 5(8), pages 1-18, August.
    16. Nick ten Caat & Luuk Graamans & Martin Tenpierik & Andy van den Dobbelsteen, 2021. "Towards Fossil Free Cities—A Supermarket, Greenhouse & Dwelling Integrated Energy System as an Alternative to District Heating: Amsterdam Case Study," Energies, MDPI, vol. 14(2), pages 1-33, January.
    17. Çakır, Uğur & Çomaklı, Kemal & Çomaklı, Ömer & Karslı, Süleyman, 2013. "An experimental exergetic comparison of four different heat pump systems working at same conditions: As air to air, air to water, water to water and water to air," Energy, Elsevier, vol. 58(C), pages 210-219.
    18. Yang, Xiaochen & Svendsen, Svend, 2018. "Ultra-low temperature district heating system with central heat pump and local boosters for low-heat-density area: Analyses on a real case in Denmark," Energy, Elsevier, vol. 159(C), pages 243-251.
    19. Maino, Giuseppe & Lucia, Umberto, 2019. "A thermodynamic approach to the microclimate environment of museums," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 517(C), pages 66-72.
    20. Guo, Hongshan & Aviv, Dorit & Loyola, Mauricio & Teitelbaum, Eric & Houchois, Nicholas & Meggers, Forrest, 2020. "On the understanding of the mean radiant temperature within both the indoor and outdoor environment, a critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 117(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:277:y:2020:i:c:s030626192031117x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.