IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v274y2020ics0306261920305365.html
   My bibliography  Save this article

Hybrid 3 in 1 thermal energy storage system – Outlook for a novel storage strategy

Author

Listed:
  • Palacios, Anabel
  • Elena Navarro, M.
  • Barreneche, Camila
  • Ding, Yulong

Abstract

Thermal energy storage (TES) technologies have been traditionally classified into sensible, latent and thermochemical categories. TES needs significant research efforts to address some fundamental challenges to reach its full potential. The hybridisation of TES technologies provides potentially a highly effective solution to the challenges. We present here a new concept, the 3 in 1 system, examining the feasibility, and the applied aspects of the newly proposed technology. The 3 in 1 system integrates the three known thermal storage methods of sensible heat, latent heat and thermochemical based TES into one system, providing three different operational configurations with cascading, charging integrated and discharging integrated working conditions. These different configurations offer controllability of TES charge/discharge processes while enhancing system-level efficiency. The proof of concept consists of a co-working matrix of a polymer as the phase change material (PCM), high-density polyethylene, and one of the most studied thermochemical material (TCM), MgSO4·7H2O. The feasibility of the composite containing 80–90 wt% of TCM was studied, over 15 cycles, for mechanical integrity, stability, energy stored and reaction kinetics. The results show that the system has a great potential for storing heat, up to 2 GJ∙m−3 and offers a wide working temperature range, from 30 °C to ∼150 °C. The combination of the PCM/TCM pairs give the composites mechanical integrity while accommodating the volume change and maintaining the structural stability during thermal cycling. This novel idea addresses some key technology gaps in TES particularly degradation and hence short life-span of TCM, cost-effectiveness and flexibility of the TCM based technology, thus offers potential paradigm shift to the thermal energy storage technology.

Suggested Citation

  • Palacios, Anabel & Elena Navarro, M. & Barreneche, Camila & Ding, Yulong, 2020. "Hybrid 3 in 1 thermal energy storage system – Outlook for a novel storage strategy," Applied Energy, Elsevier, vol. 274(C).
    • Handle: RePEc:eee:appene:v:274:y:2020:i:c:s0306261920305365
    DOI: 10.1016/j.apenergy.2020.115024
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920305365
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.115024?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Khadiran, Tumirah & Hussein, Mohd Zobir & Zainal, Zulkarnain & Rusli, Rafeadah, 2016. "Advanced energy storage materials for building applications and their thermal performance characterization: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 916-928.
    2. Scapino, Luca & Zondag, Herbert A. & Van Bael, Johan & Diriken, Jan & Rindt, Camilo C.M., 2017. "Sorption heat storage for long-term low-temperature applications: A review on the advancements at material and prototype scale," Applied Energy, Elsevier, vol. 190(C), pages 920-948.
    3. Gondora, Wayne & Doudin, Khalid & Nowakowski, Daniel J. & Xiao, Bo & Ding, Yulong & Bridgwater, Tony & Yuan, Qingchun, 2016. "Encapsulation of phase change materials using rice-husk-char," Applied Energy, Elsevier, vol. 182(C), pages 274-281.
    4. Dabiri, Soroush & Mehrpooya, Mehdi & Nezhad, Erfan Ghavami, 2018. "Latent and sensible heat analysis of PCM incorporated in a brick for cold and hot climatic conditions, utilizing computational fluid dynamics," Energy, Elsevier, vol. 159(C), pages 160-171.
    5. Aydin, Devrim & Casey, Sean P. & Riffat, Saffa, 2015. "The latest advancements on thermochemical heat storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 356-367.
    6. Aneke, Mathew & Wang, Meihong, 2016. "Energy storage technologies and real life applications – A state of the art review," Applied Energy, Elsevier, vol. 179(C), pages 350-377.
    7. Gaeini, M. & Rouws, A.L. & Salari, J.W.O. & Zondag, H.A. & Rindt, C.C.M., 2018. "Characterization of microencapsulated and impregnated porous host materials based on calcium chloride for thermochemical energy storage," Applied Energy, Elsevier, vol. 212(C), pages 1165-1177.
    8. Ströhle, S. & Haselbacher, A. & Jovanovic, Z.R. & Steinfeld, A., 2017. "Upgrading sensible-heat storage with a thermochemical storage section operated at variable pressure: An effective way toward active control of the heat-transfer fluid outflow temperature," Applied Energy, Elsevier, vol. 196(C), pages 51-61.
    9. Hasila Jarimi & Devrim Aydin & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat, 2018. "Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 13(2), pages 191-191.
    10. Hasila Jarimi & Devrim Aydin & Zhang Yanan & Gorkem Ozankaya & Xiangjie Chen & Saffa Riffat, 2019. "Review on the recent progress of thermochemical materials and processes for solar thermal energy storage and industrial waste heat recovery," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 14(1), pages 44-69.
    11. Donkers, P.A.J. & Sögütoglu, L.C. & Huinink, H.P. & Fischer, H.R. & Adan, O.C.G., 2017. "A review of salt hydrates for seasonal heat storage in domestic applications," Applied Energy, Elsevier, vol. 199(C), pages 45-68.
    12. N’Tsoukpoe, Kokouvi Edem & Osterland, Thomas & Opel, Oliver & Ruck, Wolfgang K.L., 2016. "Cascade thermochemical storage with internal condensation heat recovery for better energy and exergy efficiencies," Applied Energy, Elsevier, vol. 181(C), pages 562-574.
    13. Ioan Sarbu & Calin Sebarchievici, 2018. "A Comprehensive Review of Thermal Energy Storage," Sustainability, MDPI, vol. 10(1), pages 1-32, January.
    14. Cabeza, Luisa F. & Solé, Aran & Fontanet, Xavier & Barreneche, Camila & Jové, Aleix & Gallas, Manuel & Prieto, Cristina & Fernández, A. Inés, 2017. "Thermochemical energy storage by consecutive reactions for higher efficient concentrated solar power plants (CSP): Proof of concept," Applied Energy, Elsevier, vol. 185(P1), pages 836-845.
    15. Zhao, Y.J. & Wang, R.Z. & Li, T.X. & Nomura, Y., 2016. "Investigation of a 10 kWh sorption heat storage device for effective utilization of low-grade thermal energy," Energy, Elsevier, vol. 113(C), pages 739-747.
    16. Li, Wei & Zhang, Rong & Jiang, Nan & Tang, Xiao-fen & Shi, Hai-feng & Zhang, Xing-xiang & Zhang, Yuankai & Dong, Lin & Zhang, Ningxin, 2013. "Composite macrocapsule of phase change materials/expanded graphite for thermal energy storage," Energy, Elsevier, vol. 57(C), pages 607-614.
    17. Miró, Laia & Gasia, Jaume & Cabeza, Luisa F., 2016. "Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review," Applied Energy, Elsevier, vol. 179(C), pages 284-301.
    18. Bao, Huashan & Ma, Zhiwei & Roskilly, Anthony Paul, 2016. "Integrated chemisorption cycles for ultra-low grade heat recovery and thermo-electric energy storage and exploitation," Applied Energy, Elsevier, vol. 164(C), pages 228-236.
    19. Hasila Jarimi & Devrim Aydin & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat, 2018. "Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 13(3), pages 299-299.
    20. Scapino, Luca & Zondag, Herbert A. & Van Bael, Johan & Diriken, Jan & Rindt, Camilo C.M., 2017. "Energy density and storage capacity cost comparison of conceptual solid and liquid sorption seasonal heat storage systems for low-temperature space heating," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 1314-1331.
    21. Frazzica, Andrea & Manzan, Marco & Sapienza, Alessio & Freni, Angelo & Toniato, Giuseppe & Restuccia, Giovanni, 2016. "Experimental testing of a hybrid sensible-latent heat storage system for domestic hot water applications," Applied Energy, Elsevier, vol. 183(C), pages 1157-1167.
    22. Hasila Jarimi & Aydin Devrim & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat, 2018. "Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 13(1), pages 30-42.
    23. Courbon, Emilie & D'Ans, Pierre & Permyakova, Anastasia & Skrylnyk, Oleksandr & Steunou, Nathalie & Degrez, Marc & Frère, Marc, 2017. "A new composite sorbent based on SrBr2 and silica gel for solar energy storage application with high energy storage density and stability," Applied Energy, Elsevier, vol. 190(C), pages 1184-1194.
    24. Korhammer, Kathrin & Druske, Mona-Maria & Fopah-Lele, Armand & Rammelberg, Holger Urs & Wegscheider, Nina & Opel, Oliver & Osterland, Thomas & Ruck, Wolfgang, 2016. "Sorption and thermal characterization of composite materials based on chlorides for thermal energy storage," Applied Energy, Elsevier, vol. 162(C), pages 1462-1472.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Che Lah, Nurul Akmal, 2021. "Late transition metal nanocomplexes: Applications for renewable energy conversion and storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    2. Strong, Curtis & Carrier, Ye & Handan Tezel, F., 2022. "Experimental optimization of operating conditions for an open bulk-scale silica gel/water vapour adsorption energy storage system," Applied Energy, Elsevier, vol. 312(C).
    3. Abdalqader Ahmad & Helena Navarro & Saikat Ghosh & Yulong Ding & Jatindra Nath Roy, 2021. "Evaluation of New PCM/PV Configurations for Electrical Energy Efficiency Improvement through Thermal Management of PV Systems," Energies, MDPI, vol. 14(14), pages 1-18, July.
    4. Sleiti, Ahmad K. & Al-Ammari, Wahib A., 2021. "Off-design performance analysis of combined CSP power and direct oxy-combustion supercritical carbon dioxide cycles," Renewable Energy, Elsevier, vol. 180(C), pages 14-29.
    5. Walmsley, Timothy Gordon & Philipp, Matthias & Picón-Núñez, Martín & Meschede, Henning & Taylor, Matthew Thomas & Schlosser, Florian & Atkins, Martin John, 2023. "Hybrid renewable energy utility systems for industrial sites: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohamed Zbair & Simona Bennici, 2021. "Survey Summary on Salts Hydrates and Composites Used in Thermochemical Sorption Heat Storage: A Review," Energies, MDPI, vol. 14(11), pages 1-33, May.
    2. Li, Wei & Klemeš, Jiří Jaromír & Wang, Qiuwang & Zeng, Min, 2022. "Salt hydrate–based gas-solid thermochemical energy storage: Current progress, challenges, and perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    3. Wyttenbach, Joël & Bougard, Jacques & Descy, Gilbert & Skrylnyk, Oleksandr & Courbon, Emilie & Frère, Marc & Bruyat, Fabien, 2018. "Performances and modelling of a circular moving bed thermochemical reactor for seasonal storage," Applied Energy, Elsevier, vol. 230(C), pages 803-815.
    4. Benjamin Fumey & Luca Baldini, 2021. "Static Temperature Guideline for Comparative Testing of Sorption Heat Storage Systems for Building Application," Energies, MDPI, vol. 14(13), pages 1-15, June.
    5. N’Tsoukpoe, Kokouvi Edem & Kuznik, Frédéric, 2021. "A reality check on long-term thermochemical heat storage for household applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    6. Gaeini, M. & Rouws, A.L. & Salari, J.W.O. & Zondag, H.A. & Rindt, C.C.M., 2018. "Characterization of microencapsulated and impregnated porous host materials based on calcium chloride for thermochemical energy storage," Applied Energy, Elsevier, vol. 212(C), pages 1165-1177.
    7. Björn Nienborg & Tobias Helling & Dominik Fröhlich & Rafael Horn & Gunther Munz & Peter Schossig, 2018. "Closed Adsorption Heat Storage—A Life Cycle Assessment on Material and Component Levels," Energies, MDPI, vol. 11(12), pages 1-16, December.
    8. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    9. Mehrabadi, Abbas & Farid, Mohammed, 2018. "New salt hydrate composite for low-grade thermal energy storage," Energy, Elsevier, vol. 164(C), pages 194-203.
    10. Mehari, Abel & Xu, Z.Y. & Wang, R.Z., 2019. "Thermally-pressurized sorption heat storage cycle with low charging temperature," Energy, Elsevier, vol. 189(C).
    11. Hamza Ayaz & Veerakumar Chinnasamy & Junhyeok Yong & Honghyun Cho, 2021. "Review of Technologies and Recent Advances in Low-Temperature Sorption Thermal Storage Systems," Energies, MDPI, vol. 14(19), pages 1-36, September.
    12. Salih Cem Akcaoglu & Zhifa Sun & Stephen Carl Moratti & Georgios Martinopoulos, 2020. "Investigation of Novel Composite Materials for Thermochemical Heat Storage Systems," Energies, MDPI, vol. 13(5), pages 1-31, February.
    13. Bryan Li & Louise Buisson & Ruby-Jean Clark & Svetlana Ushak & Mohammed Farid, 2024. "A Eutectic Mixture of Calcium Chloride Hexahydrate and Bischofite with Promising Performance for Thermochemical Energy Storage," Energies, MDPI, vol. 17(3), pages 1-18, January.
    14. Aydin, Devrim & Casey, Sean P. & Chen, Xiangjie & Riffat, Saffa, 2018. "Numerical and experimental analysis of a novel heat pump driven sorption storage heater," Applied Energy, Elsevier, vol. 211(C), pages 954-974.
    15. Bennici, Simona & Dutournié, Patrick & Cathalan, Jérémy & Zbair, Mohamed & Nguyen, Minh Hoang & Scuiller, Elliot & Vaulot, Cyril, 2022. "Heat storage: Hydration investigation of MgSO4/active carbon composites, from material development to domestic applications scenarios," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    16. Hu, Nan & Li, Zi-Rui & Xu, Zhe-Wen & Fan, Li-Wu, 2022. "Rapid charging for latent heat thermal energy storage: A state-of-the-art review of close-contact melting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    17. Clark, Ruby-Jean & Farid, Mohammed, 2022. "Experimental investigation into cascade thermochemical energy storage system using SrCl2-cement and zeolite-13X materials," Applied Energy, Elsevier, vol. 316(C).
    18. Fumey, B. & Weber, R. & Baldini, L., 2019. "Sorption based long-term thermal energy storage – Process classification and analysis of performance limitations: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 57-74.
    19. Calabrese, Luigi & Brancato, Vincenza & Paolomba, Valeria & Proverbio, Edoardo, 2019. "An experimental study on the corrosion sensitivity of metal alloys for usage in PCM thermal energy storages," Renewable Energy, Elsevier, vol. 138(C), pages 1018-1027.
    20. Salviati, Sergio & Carosio, Federico & Cantamessa, Francesco & Medina, Lilian & Berglund, Lars A. & Saracco, Guido & Fina, Alberto, 2020. "Ice-templated nanocellulose porous structure enhances thermochemical storage kinetics in hydrated salt/graphite composites," Renewable Energy, Elsevier, vol. 160(C), pages 698-706.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:274:y:2020:i:c:s0306261920305365. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.