IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v16y2012i7p4527-4536.html
   My bibliography  Save this article

Energy savings in the combustion based process heating in industrial sector

Author

Listed:
  • Hasanuzzaman, M.
  • Rahim, N.A.
  • Hosenuzzaman, M.
  • Saidur, R.
  • Mahbubul, I.M.
  • Rashid, M.M.

Abstract

Energy efficiency and savings strategies in the combustion based industrial process heating has been reviewed comprehensively and presented in this paper. This work compiles latest literatures in terms of thesis, journal articles, conference proceedings, web materials, reports, books, handbooks on industrial process heating systems in the industrial sector. Different types of equipment used (i.e., recuperator, regenerators, heat wheels, heat pipes, economizers, etc.) and energy savings are reviewed in various industrial processes heating. Based on the review results, it is found that significant amounts of energy could be saved by using heat recovery system in the industrial process heating. By using recuperator up to 25% energy can be saved in the furnace. In the case of boiler, by using economizers 10% to 20% energy can be saved. Economic analysis shows that the payback period of recuperator and economizer are normally less than 2 years. It is also found that the payback period is lower when operating hour is comparatively high.

Suggested Citation

  • Hasanuzzaman, M. & Rahim, N.A. & Hosenuzzaman, M. & Saidur, R. & Mahbubul, I.M. & Rashid, M.M., 2012. "Energy savings in the combustion based process heating in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4527-4536.
    • Handle: RePEc:eee:rensus:v:16:y:2012:i:7:p:4527-4536
    DOI: 10.1016/j.rser.2012.05.027
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032112003619
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2012.05.027?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Al-Ghandoor, A. & Al-Hinti, I. & Jaber, J.O. & Sawalha, S.A., 2008. "Electricity consumption and associated GHG emissions of the Jordanian industrial sector: Empirical analysis and future projection," Energy Policy, Elsevier, vol. 36(1), pages 258-267, January.
    2. Oladiran, M.T. & Meyer, J.P., 2007. "Energy and exergy analyses of energy consumptions in the industrial sector in South Africa," Applied Energy, Elsevier, vol. 84(10), pages 1056-1067, October.
    3. Johansson, Maria T. & Söderström, Mats, 2011. "Options for the Swedish steel industry – Energy efficiency measures and fuel conversion," Energy, Elsevier, vol. 36(1), pages 191-198.
    4. Rahman Mohamed, Abdul & Lee, Keat Teong, 2006. "Energy for sustainable development in Malaysia: Energy policy and alternative energy," Energy Policy, Elsevier, vol. 34(15), pages 2388-2397, October.
    5. Chan, David Yih-Liang & Yang, Kuang-Han & Hsu, Chung-Hsuan & Chien, Min-Hsien & Hong, Gui-Bing, 2007. "Current situation of energy conservation in high energy-consuming industries in Taiwan," Energy Policy, Elsevier, vol. 35(1), pages 202-209, January.
    6. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    7. Greening, Lorna A. & Boyd, Gale & Roop, Joseph M., 2007. "Modeling of industrial energy consumption: An introduction and context," Energy Economics, Elsevier, vol. 29(4), pages 599-608, July.
    8. Hasanbeigi, Ali & Menke, Christoph & Therdyothin, Apichit, 2010. "The use of conservation supply curves in energy policy and economic analysis: The case study of Thai cement industry," Energy Policy, Elsevier, vol. 38(1), pages 392-405, January.
    9. Zhou, Nan & Levine, Mark D. & Price, Lynn, 2010. "Overview of current energy-efficiency policies in China," Energy Policy, Elsevier, vol. 38(11), pages 6439-6452, November.
    10. Saidur, R. & Ahamed, J.U. & Masjuki, H.H., 2010. "Energy, exergy and economic analysis of industrial boilers," Energy Policy, Elsevier, vol. 38(5), pages 2188-2197, May.
    11. Ekholm, Tommi & Soimakallio, Sampo & Moltmann, Sara & Höhne, Niklas & Syri, Sanna & Savolainen, Ilkka, 2010. "Effort sharing in ambitious, global climate change mitigation scenarios," Energy Policy, Elsevier, vol. 38(4), pages 1797-1810, April.
    12. Gielen, Dolf & Taylor, Peter, 2009. "Indicators for industrial energy efficiency in India," Energy, Elsevier, vol. 34(8), pages 962-969.
    13. Henriques Jr., Mauricio F. & Dantas, Fabrício & Schaeffer, Roberto, 2010. "Potential for reduction of CO2 emissions and a low-carbon scenario for the Brazilian industrial sector," Energy Policy, Elsevier, vol. 38(4), pages 1946-1961, April.
    14. Abdelaziz, E.A. & Saidur, R. & Mekhilef, S., 2011. "A review on energy saving strategies in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 150-168, January.
    15. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    16. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    17. Ang, James B., 2008. "Economic development, pollutant emissions and energy consumption in Malaysia," Journal of Policy Modeling, Elsevier, vol. 30(2), pages 271-278.
    18. Soytas, Ugur & Sari, Ramazan, 2009. "Energy consumption, economic growth, and carbon emissions: Challenges faced by an EU candidate member," Ecological Economics, Elsevier, vol. 68(6), pages 1667-1675, April.
    19. Saidur, R. & Hasanuzzaman, M. & Yogeswaran, S. & Mohammed, H.A. & Hossain, M.S., 2010. "An end-use energy analysis in a Malaysian public hospital," Energy, Elsevier, vol. 35(12), pages 4780-4785.
    20. Hasanuzzaman, M. & Saidur, R. & Masjuki, H.H., 2009. "Effects of operating variables on heat transfer and energy consumption of a household refrigerator-freezer during closed door operation," Energy, Elsevier, vol. 34(2), pages 196-198.
    21. Al-Mansour, Fouad & Merse, Stane & Tomsic, Miha, 2003. "Comparison of energy efficiency strategies in the industrial sector of Slovenia," Energy, Elsevier, vol. 28(5), pages 421-440.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. M. Hasanuzzaman & Ummu Salamah Zubir & Nur Iqtiyani Ilham & Hang Seng Che, 2017. "Global electricity demand, generation, grid system, and renewable energy polices: a review," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 6(3), May.
    2. Mollik, Sazib & Rashid, M.M. & Hasanuzzaman, M. & Karim, M.E. & Hosenuzzaman, M., 2016. "Prospects, progress, policies, and effects of rural electrification in Bangladesh," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 553-567.
    3. Clara Inés Pardo Martínez, 2009. "Energy efficiency developments in the manufacturing industries of Germany and Colombia, 1998-2005," Serie de Documentos en Economía y Violencia 6144, Centro de Investigaciones en Violencia, Instituciones y Desarrollo Económico (VIDE).
    4. Habib, Mohammad Ahsan & Hasanuzzaman, M. & Hosenuzzaman, M. & Salman, Asif & Mehadi, Md Riyad, 2016. "Energy consumption, energy saving and emission reduction of a garment industrial building in Bangladesh," Energy, Elsevier, vol. 112(C), pages 91-100.
    5. ABM Abdul Malek & M Hasanuzzaman & Nasrudin A Rahim & Yusuf A Al–Turki, 2021. "Energy, economic, and environmental analysis of 10-MW biomass gasification based power generation in Malaysia," Energy & Environment, , vol. 32(2), pages 295-337, March.
    6. Santhanam, S. & Heddrich, M.P. & Riedel, M. & Friedrich, K.A., 2017. "Theoretical and experimental study of Reversible Solid Oxide Cell (r-SOC) systems for energy storage," Energy, Elsevier, vol. 141(C), pages 202-214.
    7. Dudkiewicz, Edyta & Fidorów-Kaprawy, Natalia, 2017. "The energy analysis of a hybrid hot tap water preparation system based on renewable and waste sources," Energy, Elsevier, vol. 127(C), pages 198-208.
    8. IqtiyaniIlham, Nur & Hasanuzzaman, M. & Hosenuzzaman, M., 2017. "European smart grid prospects, policies, and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 776-790.
    9. Schiro, Fabio & Benato, Alberto & Stoppato, Anna & Destro, Nicola, 2017. "Improving photovoltaics efficiency by water cooling: Modelling and experimental approach," Energy, Elsevier, vol. 137(C), pages 798-810.
    10. Ahmed, Ferdous & Al Amin, Abul Quasem & Hasanuzzaman, M. & Saidur, R., 2013. "Alternative energy resources in Bangladesh and future prospect," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 698-707.
    11. Hosenuzzaman, M. & Rahim, N.A. & Selvaraj, J. & Hasanuzzaman, M. & Malek, A.B.M.A. & Nahar, A., 2015. "Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 284-297.
    12. Sharma, Ashish K. & Sharma, Chandan & Mullick, Subhash C. & Kandpal, Tara C., 2017. "Solar industrial process heating: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 124-137.
    13. Haedr Abdalha Mahmood Alsalame & Muhammad Imtiaz Hussain & Waseem Amjad & Asma Ali & Gwi Hyun Lee, 2022. "Thermo-Economic Performance Evaluation of a Conical Solar Concentrating System Using Coil-Based Absorber," Energies, MDPI, vol. 15(9), pages 1-12, May.
    14. Yazawa, Kazuaki & Shakouri, Ali & Hendricks, Terry J., 2017. "Thermoelectric heat recovery from glass melt processes," Energy, Elsevier, vol. 118(C), pages 1035-1043.
    15. Moreno Resendiz, Erick & Akhtar, Javed & Park, Young Ho & Wang, Huiyao & Xu, Pei & Kota, Krishna & Kuravi, Sarada, 2023. "Analysis of a small-scale modified beam-down solar concentrator system for low temperature applications," Renewable Energy, Elsevier, vol. 215(C).
    16. Qichen Wang & Zhengmeng Hou & Yilin Guo & Liangchao Huang & Yanli Fang & Wei Sun & Yuhan Ge, 2023. "Enhancing Energy Transition through Sector Coupling: A Review of Technologies and Models," Energies, MDPI, vol. 16(13), pages 1-31, July.
    17. Kumar, Laveet & Hasanuzzaman, M. & Rahim, N.A. & Islam, M.M., 2021. "Modeling, simulation and outdoor experimental performance analysis of a solar-assisted process heating system for industrial process heat," Renewable Energy, Elsevier, vol. 164(C), pages 656-673.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Madlool, N.A. & Saidur, R. & Rahim, N.A. & Kamalisarvestani, M., 2013. "An overview of energy savings measures for cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 18-29.
    2. Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    3. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    4. Sharma, Ashish K. & Sharma, Chandan & Mullick, Subhash C. & Kandpal, Tara C., 2017. "Solar industrial process heating: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 124-137.
    5. Madlool, N.A. & Saidur, R. & Hossain, M.S. & Rahim, N.A., 2011. "A critical review on energy use and savings in the cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2042-2060, May.
    6. BoroumandJazi, G. & Rismanchi, B. & Saidur, R., 2013. "A review on exergy analysis of industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 198-203.
    7. Habib, Mohammad Ahsan & Hasanuzzaman, M. & Hosenuzzaman, M. & Salman, Asif & Mehadi, Md Riyad, 2016. "Energy consumption, energy saving and emission reduction of a garment industrial building in Bangladesh," Energy, Elsevier, vol. 112(C), pages 91-100.
    8. Mekhilef, S. & Saidur, R. & Safari, A., 2011. "A review on solar energy use in industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 1777-1790, May.
    9. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    10. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    11. Prince, & Hati, Ananda Shankar, 2021. "A comprehensive review of energy-efficiency of ventilation system using Artificial Intelligence," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    12. Saidur, R. & Hasanuzzaman, M. & Mahlia, T.M.I. & Rahim, N.A. & Mohammed, H.A., 2011. "Chillers energy consumption, energy savings and emission analysis in an institutional buildings," Energy, Elsevier, vol. 36(8), pages 5233-5238.
    13. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    14. Du Plessis, Gideon Edgar & Liebenberg, Leon & Mathews, Edward Henry, 2013. "The use of variable speed drives for cost-effective energy savings in South African mine cooling systems," Applied Energy, Elsevier, vol. 111(C), pages 16-27.
    15. Saidur, R. & Hossain, M.S. & Islam, M.R. & Fayaz, H. & Mohammed, H.A., 2011. "A review on kiln system modeling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2487-2500, June.
    16. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    17. Saidur, R. & Rezaei, M. & Muzammil, W.K. & Hassan, M.H. & Paria, S. & Hasanuzzaman, M., 2012. "Technologies to recover exhaust heat from internal combustion engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5649-5659.
    18. Lean, Hooi Hooi & Smyth, Russell, 2010. "Multivariate Granger causality between electricity generation, exports, prices and GDP in Malaysia," Energy, Elsevier, vol. 35(9), pages 3640-3648.
    19. Saidur, R. & Mahlia, T.M.I., 2010. "Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries," Energy Policy, Elsevier, vol. 38(8), pages 4617-4625, August.
    20. Misbah Sadiq & Desti Kannaiah & Ghulam Yahya Khan & Malik Shahzad Shabbir & Kanwal Bilal & Aysha Zamir, 2023. "Does sustainable environmental agenda matter? The role of globalization toward energy consumption, economic growth, and carbon dioxide emissions in South Asian countries," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(1), pages 76-95, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:16:y:2012:i:7:p:4527-4536. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.