IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v88y2016icp102-111.html
   My bibliography  Save this article

Economics and greenhouse gas balance of distributed electricity production at sawmills using hermetic turbogenerator

Author

Listed:
  • Leino, M.
  • Uusitalo, V.
  • Grönman, A.
  • Nerg, J.
  • Horttanainen, M.
  • Soukka, R.
  • Pyrhönen, J.

Abstract

This article focuses on greenhouse gas (GHG) emissions reduction and on the economics in renewable electricity production at sawmills. Electricity production application in this study is a hermetic turbogenerator (HTG). The HTG is a small-scale steam turbine-generator unit of compact size that achieves high efficiency. The paper studies GHG emissions and the economics of HTG use in sawmills using life cycle assessment methodologies. Small- and large-scale HTG processes are studied in three scenarios. Sawmills produce large volumes of biomass by-products which are mainly used to produce heat needed in lumber dryers. However, due to remote location of sawmills there may be no use for excess biomass. HTGs can be used to produce electricity in addition to heat (CHP), which may help to increase renewable electricity production in sparsely populated areas. It is concluded that from the economic perspective HTGs may be an attractive option but financial viability is dependent on energy prices, required investments, and by-product value. From the climate change perspective, electricity production with HTGs may be a good option if there is excess biomass sources available.

Suggested Citation

  • Leino, M. & Uusitalo, V. & Grönman, A. & Nerg, J. & Horttanainen, M. & Soukka, R. & Pyrhönen, J., 2016. "Economics and greenhouse gas balance of distributed electricity production at sawmills using hermetic turbogenerator," Renewable Energy, Elsevier, vol. 88(C), pages 102-111.
  • Handle: RePEc:eee:renene:v:88:y:2016:i:c:p:102-111
    DOI: 10.1016/j.renene.2015.11.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014811530447X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2015.11.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Dowaki, Kiyoshi & Mori, Shunsuke, 2005. "Biomass energy used in a sawmill," Applied Energy, Elsevier, vol. 80(3), pages 327-339, March.
    2. Anderson, Jan-Olof & Toffolo, Andrea, 2013. "Improving energy efficiency of sawmill industrial sites by integration with pellet and CHP plants," Applied Energy, Elsevier, vol. 111(C), pages 791-800.
    3. Uusitalo, V. & Soukka, R. & Horttanainen, M. & Niskanen, A. & Havukainen, J., 2013. "Economics and greenhouse gas balance of biogas use systems in the Finnish transportation sector," Renewable Energy, Elsevier, vol. 51(C), pages 132-140.
    4. Anderson, Jan-Olof & Westerlund, Lars, 2014. "Improved energy efficiency in sawmill drying system," Applied Energy, Elsevier, vol. 113(C), pages 891-901.
    5. Danon, Gradimir & Furtula, Mladen & Mandić, Marija, 2012. "Possibilities of implementation of CHP (combined heat and power) in the wood industry in Serbia," Energy, Elsevier, vol. 48(1), pages 169-176.
    6. Voorspools, Kris R. & D'haeseleer, William D., 2000. "An evaluation method for calculating the emission responsibility of specific electric applications," Energy Policy, Elsevier, vol. 28(13), pages 967-980, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sena, Kenton & Ochuodho, Thomas O. & Agyeman, Domena A. & Contreras, Marco & Niman, Chad & Eaton, Dan & Yang, Jian, 2022. "Wood bioenergy for rural energy resilience: Suitable site selection and potential economic impacts in Appalachian Kentucky," Forest Policy and Economics, Elsevier, vol. 145(C).
    2. Ville Uusitalo & Rafael Horn & Stephanie D. Maier, 2022. "Assessing Land Use Efficiencies and Land Quality Impacts of Renewable Transportation Energy Systems for Passenger Cars Using the LANCA ® Method," Sustainability, MDPI, vol. 14(10), pages 1-16, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Martínez González, Aldemar & Lesme Jaén, René & Silva Lora, Electo Eduardo, 2020. "Thermodynamic assessment of the integrated gasification-power plant operating in the sawmill industry: An energy and exergy analysis," Renewable Energy, Elsevier, vol. 147(P1), pages 1151-1163.
    2. Sun, Zeyi & Li, Lin & Bego, Andres & Dababneh, Fadwa, 2015. "Customer-side electricity load management for sustainable manufacturing systems utilizing combined heat and power generation system," International Journal of Production Economics, Elsevier, vol. 165(C), pages 112-119.
    3. Uusitalo, V. & Havukainen, J. & Manninen, K. & Höhn, J. & Lehtonen, E. & Rasi, S. & Soukka, R. & Horttanainen, M., 2014. "Carbon footprint of selected biomass to biogas production chains and GHG reduction potential in transportation use," Renewable Energy, Elsevier, vol. 66(C), pages 90-98.
    4. Johnsson, Simon & Andersson, Elias & Thollander, Patrik & Karlsson, Magnus, 2019. "Energy savings and greenhouse gas mitigation potential in the Swedish wood industry," Energy, Elsevier, vol. 187(C).
    5. Filippo Beltrami & Fulvio Fontini & Monica Giulietti & Luigi Grossi, 2022. "The Zonal and Seasonal CO2 Marginal Emissions Factors for the Italian Power Market," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 83(2), pages 381-411, October.
    6. Howard, B. & Waite, M. & Modi, V., 2017. "Current and near-term GHG emissions factors from electricity production for New York State and New York City," Applied Energy, Elsevier, vol. 187(C), pages 255-271.
    7. Angelo Del Giudice & Andrea Acampora & Enrico Santangelo & Luigi Pari & Simone Bergonzoli & Ettore Guerriero & Francesco Petracchini & Marco Torre & Valerio Paolini & Francesco Gallucci, 2019. "Wood Chip Drying through the Using of a Mobile Rotary Dryer," Energies, MDPI, vol. 12(9), pages 1-16, April.
    8. Dandikas, Vasilis & Heuwinkel, Hauke & Lichti, Fabian & Eckl, Thomas & Drewes, Jörg E. & Koch, Konrad, 2018. "Correlation between hydrolysis rate constant and chemical composition of energy crops," Renewable Energy, Elsevier, vol. 118(C), pages 34-42.
    9. Xinhua Shen & Raghava R. Kommalapati & Ziaul Huque, 2015. "The Comparative Life Cycle Assessment of Power Generation from Lignocellulosic Biomass," Sustainability, MDPI, vol. 7(10), pages 1-14, September.
    10. Li, Zeyun & Kuo, Yen-Ku & Mahmud, Abdul Rahman & Nassani, Abdelmohsen A. & Haffar, Mohamed & Muda, Iskandar, 2022. "Integration of renewable energy, environmental policy stringency, and climate technologies in realizing environmental sustainability: Evidence from OECD countries," Renewable Energy, Elsevier, vol. 196(C), pages 1376-1384.
    11. Tańczuk, Mariusz & Ulbrich, Roman, 2013. "Implementation of a biomass-fired co-generation plant supplied with an ORC (Organic Rankine Cycle) as a heat source for small scale heat distribution system – A comparative analysis under Polish and G," Energy, Elsevier, vol. 62(C), pages 132-141.
    12. Luickx, Patrick J. & Helsen, Lieve M. & D'haeseleer, William D., 2008. "Influence of massive heat-pump introduction on the electricity-generation mix and the GHG effect: Comparison between Belgium, France, Germany and The Netherlands," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(8), pages 2140-2158, October.
    13. Akhlaghi, Shahin & Gedde, Ulf W. & Hedenqvist, Mikael S. & Braña, Maria T. Conde & Bellander, Martin, 2015. "Deterioration of automotive rubbers in liquid biofuels: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1238-1248.
    14. Pimm, Andrew J. & Palczewski, Jan & Barbour, Edward R. & Cockerill, Tim T., 2021. "Using electricity storage to reduce greenhouse gas emissions," Applied Energy, Elsevier, vol. 282(PA).
    15. Julklang, Wittaya & Golman, Boris, 2015. "Effect of process parameters on energy performance of spray drying with exhaust air heat recovery for production of high value particles," Applied Energy, Elsevier, vol. 151(C), pages 285-295.
    16. Doddapaneni, Tharaka Rama Krishna C. & Praveenkumar, Ramasamy & Tolvanen, Henrik & Rintala, Jukka & Konttinen, Jukka, 2018. "Techno-economic evaluation of integrating torrefaction with anaerobic digestion," Applied Energy, Elsevier, vol. 213(C), pages 272-284.
    17. Bettle, R. & Pout, C.H. & Hitchin, E.R., 2006. "Interactions between electricity-saving measures and carbon emissions from power generation in England and Wales," Energy Policy, Elsevier, vol. 34(18), pages 3434-3446, December.
    18. Da Xie & Yupu Lu & Junbo Sun & Chenghong Gu & Jilai Yu, 2016. "Optimal Operation of Network-Connected Combined Heat and Powers for Customer Profit Maximization," Energies, MDPI, vol. 9(6), pages 1-17, June.
    19. Tugcu, Can Tansel & Tiwari, Aviral Kumar, 2016. "Does renewable and/or non-renewable energy consumption matter for total factor productivity (TFP) growth? Evidence from the BRICS," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 610-616.
    20. Ashish Kumar Karmaker & Md. Alamgir Hossain & Nallapaneni Manoj Kumar & Vishnupriyan Jagadeesan & Arunkumar Jayakumar & Biplob Ray, 2020. "Analysis of Using Biogas Resources for Electric Vehicle Charging in Bangladesh: A Techno-Economic-Environmental Perspective," Sustainability, MDPI, vol. 12(7), pages 1-19, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:88:y:2016:i:c:p:102-111. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.