IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v151y2015icp285-295.html
   My bibliography  Save this article

Effect of process parameters on energy performance of spray drying with exhaust air heat recovery for production of high value particles

Author

Listed:
  • Julklang, Wittaya
  • Golman, Boris

Abstract

Spray drying process has been widely used in various industries for many decades for production of numerous materials. This paper explores the energy performance of an industrial scale spray dryer equipped with an exhaust air heat recovery system for production of high value particles. Energy efficiency and energy saving were calculated using a comprehensive mathematical model of spray drying. The response surface methodology (RSM) was utilized to study the effect of process parameters on energy performance using a space-filling design. The meta model equations were formulated employing the well-fitted response surface equations with adjusted R2 larger than 0.995. The energy efficiency as high as 43.3% was obtained at high flow rate of dilute slurry, while the highest energy saving of 52.4% was found by combination of positive effect of drying air temperature and negative effect of slurry mass flow rate. The utilization of efficient air-to-air heat exchanger leads to an increase in energy efficiency and energy savings. The detailed temperature and vapor concentration profiles obtained with the model are also valuable in determining final product quality when spray dryer is operated at energy efficient conditions.

Suggested Citation

  • Julklang, Wittaya & Golman, Boris, 2015. "Effect of process parameters on energy performance of spray drying with exhaust air heat recovery for production of high value particles," Applied Energy, Elsevier, vol. 151(C), pages 285-295.
  • Handle: RePEc:eee:appene:v:151:y:2015:i:c:p:285-295
    DOI: 10.1016/j.apenergy.2015.04.069
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261915005322
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2015.04.069?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anderson, Jan-Olof & Westerlund, Lars, 2014. "Improved energy efficiency in sawmill drying system," Applied Energy, Elsevier, vol. 113(C), pages 891-901.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Leino, M. & Uusitalo, V. & Grönman, A. & Nerg, J. & Horttanainen, M. & Soukka, R. & Pyrhönen, J., 2016. "Economics and greenhouse gas balance of distributed electricity production at sawmills using hermetic turbogenerator," Renewable Energy, Elsevier, vol. 88(C), pages 102-111.
    2. Angelo Del Giudice & Andrea Acampora & Enrico Santangelo & Luigi Pari & Simone Bergonzoli & Ettore Guerriero & Francesco Petracchini & Marco Torre & Valerio Paolini & Francesco Gallucci, 2019. "Wood Chip Drying through the Using of a Mobile Rotary Dryer," Energies, MDPI, vol. 12(9), pages 1-16, April.
    3. Yashwant Singh Rawat & Misganu Eba & Moti Nebiyu, 2023. "Lumber Recovery Rate of Cupressus lusitanica in Arsi Forest Enterprise, Ethiopia," Sustainability, MDPI, vol. 15(2), pages 1-14, January.
    4. Martínez González, Aldemar & Lesme Jaén, René & Silva Lora, Electo Eduardo, 2020. "Thermodynamic assessment of the integrated gasification-power plant operating in the sawmill industry: An energy and exergy analysis," Renewable Energy, Elsevier, vol. 147(P1), pages 1151-1163.
    5. Johnsson, Simon & Andersson, Elias & Thollander, Patrik & Karlsson, Magnus, 2019. "Energy savings and greenhouse gas mitigation potential in the Swedish wood industry," Energy, Elsevier, vol. 187(C).
    6. Yin, Yonggao & Zheng, Baojun & Yang, Can & Zhang, Xiaosong, 2015. "A proposed compressed air drying method using pressurized liquid desiccant and experimental verification," Applied Energy, Elsevier, vol. 141(C), pages 80-89.
    7. Kung, Kevin S. & Ghoniem, Ahmed F., 2019. "Multi-scale analysis of drying thermally thick biomass for bioenergy applications," Energy, Elsevier, vol. 187(C).
    8. Lingayat, Abhay Bhanudas & Chandramohan, V.P. & Raju, V.R.K. & Meda, Venkatesh, 2020. "A review on indirect type solar dryers for agricultural crops – Dryer setup, its performance, energy storage and important highlights," Applied Energy, Elsevier, vol. 258(C).
    9. Defraeye, Thijs, 2014. "Advanced computational modelling for drying processes – A review," Applied Energy, Elsevier, vol. 131(C), pages 323-344.
    10. Lamidi, Rasaq. O. & Jiang, L. & Pathare, Pankaj B. & Wang, Y.D. & Roskilly, A.P., 2019. "Recent advances in sustainable drying of agricultural produce: A review," Applied Energy, Elsevier, vol. 233, pages 367-385.
    11. Mathew, Adarsh Abi & Thangavel, Venugopal, 2021. "A novel thermal energy storage integrated evacuated tube heat pipe solar dryer for agricultural products: Performance and economic evaluation," Renewable Energy, Elsevier, vol. 179(C), pages 1674-1693.
    12. Katarzyna Mydlarz & Marek Wieruszewski, 2022. "Economic, Technological as Well as Environmental and Social Aspects of Local Use of Wood By-Products Generated in Sawmills for Energy Purposes," Energies, MDPI, vol. 15(4), pages 1-13, February.
    13. Hany S. EL-Mesery & Abd El-Fatah Abomohra & Chan-Ung Kang & Ji-Kwang Cheon & Bikram Basak & Byong-Hun Jeon, 2019. "Evaluation of Infrared Radiation Combined with Hot Air Convection for Energy-Efficient Drying of Biomass," Energies, MDPI, vol. 12(14), pages 1-15, July.
    14. Bellocchi, Sara & Guizzi, Giuseppe Leo & Manno, Michele & Pentimalli, Marzia & Salvatori, Marco & Zaccagnini, Alessandro, 2017. "Adsorbent materials for low-grade waste heat recovery: Application to industrial pasta drying processes," Energy, Elsevier, vol. 140(P1), pages 729-745.
    15. Yang, Bo & Yuan, Weixing & Fu, Lin & Zhang, Shigang & Wei, Maolin & Guo, Dongcai, 2020. "Techno-economic study of full-open absorption heat pump applied to flue gas total heat recovery," Energy, Elsevier, vol. 190(C).
    16. Aleksandra Górna & Alicja Szabelska-Beręsewicz & Marek Wieruszewski & Monika Starosta-Grala & Zygmunt Stanula & Anna Kożuch & Krzysztof Adamowicz, 2023. "Predicting Post-Production Biomass Prices," Energies, MDPI, vol. 16(8), pages 1-16, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:151:y:2015:i:c:p:285-295. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.