IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v32y2021i3d10.1007_s10845-020-01660-4.html
   My bibliography  Save this article

Critical joint identification for efficient sequencing

Author

Listed:
  • Roham Sadeghi Tabar

    (Chalmers University of Technology)

  • Kristina Wärmefjord

    (Chalmers University of Technology)

  • Rikard Söderberg

    (Chalmers University of Technology)

  • Lars Lindkvist

    (Chalmers University of Technology)

Abstract

Identifying the optimal sequence of joining is an exhaustive combinatorial optimization problem. On each assembly, there is a specific number of weld points that determine the geometrical deviation of the assembly after joining. The number and sequence of such weld points play a crucial role both for sequencing and assembly planning. While there are studies on identifying the complete sequence of welding, identifying such joints are not addressed. In this paper, based on the principles of machine intelligence, black-box models of the assembly sequences are built using the support vector machines (SVM). To identify the number of the critical weld points, principle component analysis is performed on a proposed data set, evaluated using the SVM models. The approach has been applied to three assemblies of different sizes, and has successfully identified the corresponding critical weld points. It has been shown that a small fraction of the weld points of the assembly can reduce more than 60% of the variability in the assembly deviation after joining.

Suggested Citation

  • Roham Sadeghi Tabar & Kristina Wärmefjord & Rikard Söderberg & Lars Lindkvist, 2021. "Critical joint identification for efficient sequencing," Journal of Intelligent Manufacturing, Springer, vol. 32(3), pages 769-780, March.
    • Handle: RePEc:spr:joinma:v:32:y:2021:i:3:d:10.1007_s10845-020-01660-4
    DOI: 10.1007/s10845-020-01660-4
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-020-01660-4
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-020-01660-4?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chung-Feng Jeffrey Kuo & Chun-Ping Tung & Wei-Han Weng, 2019. "Applying the support vector machine with optimal parameter design into an automatic inspection system for classifying micro-defects on surfaces of light-emitting diode chips," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 727-741, February.
    2. Yun Bai & Zhenzhong Sun & Bo Zeng & Jianyu Long & Lin Li & José Valente Oliveira & Chuan Li, 2019. "A comparison of dimension reduction techniques for support vector machine modeling of multi-parameter manufacturing quality prediction," Journal of Intelligent Manufacturing, Springer, vol. 30(5), pages 2245-2256, June.
    3. Guiqian Liu & Xiangdong Gao & Deyong You & Nanfeng Zhang, 2019. "Prediction of high power laser welding status based on PCA and SVM classification of multiple sensors," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 821-832, February.
    4. Feng Zhang & Taotao Zhou, 2019. "Process parameter optimization for laser-magnetic welding based on a sample-sorted support vector regression," Journal of Intelligent Manufacturing, Springer, vol. 30(5), pages 2217-2230, June.
    5. Liang Tian & Yu Luo, 2020. "A study on the prediction of inherent deformation in fillet-welded joint using support vector machine and genetic optimization algorithm," Journal of Intelligent Manufacturing, Springer, vol. 31(3), pages 575-596, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Anshuman Kumar Sahu & Siba Sankar Mahapatra, 2021. "Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes," Journal of Intelligent Manufacturing, Springer, vol. 32(8), pages 2125-2145, December.
    2. Sangho Lee & Youngdoo Son, 2021. "Motor Load Balancing with Roll Force Prediction for a Cold-Rolling Setup with Neural Networks," Mathematics, MDPI, vol. 9(12), pages 1-21, June.
    3. Jinyuan Liu & Shouxi Wang & Nan Wei & Yi Yang & Yihao Lv & Xu Wang & Fanhua Zeng, 2023. "An Enhancement Method Based on Long Short-Term Memory Neural Network for Short-Term Natural Gas Consumption Forecasting," Energies, MDPI, vol. 16(3), pages 1-14, January.
    4. Sachin Kumar & T. Gopi & N. Harikeerthana & Munish Kumar Gupta & Vidit Gaur & Grzegorz M. Krolczyk & ChuanSong Wu, 2023. "Machine learning techniques in additive manufacturing: a state of the art review on design, processes and production control," Journal of Intelligent Manufacturing, Springer, vol. 34(1), pages 21-55, January.
    5. Diyi Zhou & Shihua Gong & Ziyue Wang & Delong Li & Huaiqing Lu, 2021. "Error analysis based on error transfer theory and compensation strategy for LED chip visual localization systems," Journal of Intelligent Manufacturing, Springer, vol. 32(5), pages 1345-1359, June.
    6. Chia-Yen Lee & Chen-Fu Chien, 2022. "Pitfalls and protocols of data science in manufacturing practice," Journal of Intelligent Manufacturing, Springer, vol. 33(5), pages 1189-1207, June.
    7. Runquan Xiao & Yanling Xu & Zhen Hou & Chao Chen & Shanben Chen, 2022. "An automatic calibration algorithm for laser vision sensor in robotic autonomous welding system," Journal of Intelligent Manufacturing, Springer, vol. 33(5), pages 1419-1432, June.
    8. Matteo Bugatti & Bianca Maria Colosimo, 2022. "Towards real-time in-situ monitoring of hot-spot defects in L-PBF: a new classification-based method for fast video-imaging data analysis," Journal of Intelligent Manufacturing, Springer, vol. 33(1), pages 293-309, January.
    9. Zhen Zhang & Zenan Yang & Chenchong Wang & Wei Xu, 2024. "Accelerating ultrashort pulse laser micromachining process comprehensive optimization using a machine learning cycle design strategy integrated with a physical model," Journal of Intelligent Manufacturing, Springer, vol. 35(1), pages 449-465, January.
    10. Dayuan Wu & Ping Yan & You Guo & Han Zhou & Jian Chen, 2022. "A gear machining error prediction method based on adaptive Gaussian mixture regression considering stochastic disturbance," Journal of Intelligent Manufacturing, Springer, vol. 33(8), pages 2321-2339, December.
    11. Alon Ratner & Michael Wood & Maximilian Chowanietz & Nikhil Kumar & Rashik Patel & Paul Hadlum & Abhishek Das & Iain Masters, 2022. "Laser Doppler Vibrometry for Evaluating the Quality of Welds in Lithium-Ion Supercells," Energies, MDPI, vol. 15(12), pages 1-20, June.
    12. Germán González Rodríguez & Jose M. Gonzalez-Cava & Juan Albino Méndez Pérez, 2020. "An intelligent decision support system for production planning based on machine learning," Journal of Intelligent Manufacturing, Springer, vol. 31(5), pages 1257-1273, June.
    13. Jie Jian & Yu Guo & Lin Jiang & Yanyan An & Jiafu Su, 2019. "A Multi-Objective Optimization Model for Green Supply Chain Considering Environmental Benefits," Sustainability, MDPI, vol. 11(21), pages 1-20, October.
    14. Zhenyu Liu & Donghao Zhang & Weiqiang Jia & Xianke Lin & Hui Liu, 2020. "An adversarial bidirectional serial–parallel LSTM-based QTD framework for product quality prediction," Journal of Intelligent Manufacturing, Springer, vol. 31(6), pages 1511-1529, August.
    15. Yanxi Zhang & Deyong You & Xiangdong Gao & Congyi Wang & Yangjin Li & Perry P. Gao, 2020. "Real-time monitoring of high-power disk laser welding statuses based on deep learning framework," Journal of Intelligent Manufacturing, Springer, vol. 31(4), pages 799-814, April.
    16. Alexander Gerling & Holger Ziekow & Andreas Hess & Ulf Schreier & Christian Seiffer & Djaffar Ould Abdeslam, 2022. "Comparison of algorithms for error prediction in manufacturing with automl and a cost-based metric," Journal of Intelligent Manufacturing, Springer, vol. 33(2), pages 555-573, February.
    17. Yang Hui & Xuesong Mei & Gedong Jiang & Fei Zhao & Pengcheng Shen, 2020. "Assembly consistency improvement of straightness error of the linear axis based on the consistency degree and GA-MSVM-I-KM," Journal of Intelligent Manufacturing, Springer, vol. 31(6), pages 1429-1441, August.
    18. Mengrui Zhu & Yun Yang & Xiaobing Feng & Zhengchun Du & Jianguo Yang, 2023. "Robust modeling method for thermal error of CNC machine tools based on random forest algorithm," Journal of Intelligent Manufacturing, Springer, vol. 34(4), pages 2013-2026, April.
    19. Kong, Xuefeng & Yang, Jun & Hao, Songhua, 2021. "Reliability modeling-based tolerance design and process parameter analysis considering performance degradation," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    20. Guoming Zeng & Maolan Zhang & Pei Gao & Jiale Wang & Da Sun, 2020. "Algicidal Efficiency and Genotoxic Effects of Phanerochaete chrysosporium against Microcystis aeruginosa," IJERPH, MDPI, vol. 17(11), pages 1-11, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:32:y:2021:i:3:d:10.1007_s10845-020-01660-4. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.